AXESS AX-NIS32SWC-6V Handleiding

Bekijk gratis de handleiding van AXESS AX-NIS32SWC-6V (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 27 mensen en kreeg gemiddeld 4.7 sterren uit 6 reviews. Heb je een vraag over AXESS AX-NIS32SWC-6V of wil je andere gebruikers van dit product iets vragen? Stel een vraag

© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION

© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION

REV. 10/14/16

REV. 10/14/16

axxessinterfaces.com • metraonline.com

axxessinterfaces.com • metraonline.com

Axxess Integrate

®

Axxess Integrate

®

Installation Instructions for AX-NIS32SWC-6VInstallation Instructions for AX-NIS32SWC-6V

INTERFACE FEATURES

• Pre-wired ASWC-1 harness (ASWC-1 sold separately)

• Retains the factory backup camera to an aftermarket radio

• Includes the AX-CAM6V 12-volt to 6-volt converter

AX-NIS32SWC-6V

Nissan (with 4.3" display radio) 2010-up

INTERFACE COMPONENTS

• AX-NIS32SWC-6V harness • AX-CAM6V 12-volt to 6-volt converter

APPLICATIONS

• Wire cutter • Crimping tool • Solder gun • Tape

• Connectors (example: butt connectors, bell caps, etc.)

TOOLS REQUIRED

CAUTION!

All accessories, switches, climate controls panels, and especially air bag indicator lights

must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the

on position, or while the vehicle is running.

NISSAN

Altima coupe 2010-2013*

Altima sedan 2010-2012*

Altima sedan 2013-up

Cube 2010*

Frontier 2013-up*

Juke 2015-up*

Murano 2015-up

Quest (without Bose)

2011-up*

Rogue 2011-2013*

Rogue 2014-up

Rogue Select 2014-2015*

Sentra 2010-up*

Titan 2013-2015*

Versa Note 2014-up*

* For use when retaining the OE backup camera only.

KPNOWLEDGE IS OWER

Enhance your installation and fabrication skills by

enrolling in the most cognized and spected rere

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for mo information and take steps re

toward a better tomorrow.

Metra recommends MECP

certified technicians

Connections to be made

• Connect the wire to chassis ground, and also to the wire of the BlackBlack

AX-CAM6V.

• Connect the wire labeled "Camera Power 6V" to the wire RedBlue/Red

of the AX-CAM6V.

• Connect the wire to the reverse wire of the aftermarket radio, Green/Purple

and also to the wire of the AX-CAM6V.Blue/White

• Connect the Yellow RCA jack to the rear camera input of the aftermarket radio

.

12-pin pre-wired ASWC-1 harness:

For the Altima 2013-up / Rogue 2014-up only: sedan

This harness is to be used along with the optional ASWC-1 (not included) to

retain steering wheel audio controls. Please refer to the ASWC-1 instructions

for radio connections and programming.

Note:Disregard the harness that comes with the ASWC-1.

• Connect the unlabeled wire to the accessory wire.Red

Product specificaties