AXESS AX-VW93-CAM Handleiding

Bekijk gratis de handleiding van AXESS AX-VW93-CAM (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.2 sterren uit 6 reviews. Heb je een vraag over AXESS AX-VW93-CAM of wil je andere gebruikers van dit product iets vragen? Stel een vraag

AX-VW93-CAM

INSTALLATION INSTRUCTIONS

REV. 3/1/18© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION

Integrate • AxxessInterfaces.com

AX-VW93-CAM

Volkswagen Golf (MK VII)

Camera Retention Interface

2012*

Connections to be made

• Connect the wire to chassis ground.Black

• Connect the wire to accessory power.Red

• Connect the wire to reverse power (switched).Green

• Connect the Yellow RCA jack to the aftermarket backup camera.

Installing the Interface

• Remove the main connector from the radio, then connect the

male

plug

from the

AX-VW93-CAM

into the radio.

• Connect the

male

factory connector into the

female

plug from the

AX-VW93-CAM

.

• Connect the

AX-VW93-CAM harness

into the AX-VW93-CAM interface.

• Test for correct operation.

• Allows a camera to be added to the factory radio

• Plug-and-play, no cutting of wires required

• Designed for NTSC cameras

• Auto switch in reverse gear

INTERFACE FEATURES

* For vehicles with Composition Media (MIB), Discovery Pro (MIB), Composition

Media (MIB STD2), Discover Media (MIB STD2).

* Vehicle must have an OPS (Optical Parking Sensor) head unit.

* Not compatible with: 3Q0035820A, 3Q0035820, 3Q0035819A, 3Q0035819,

3Q0035812, 5G0035820A, 5G0035820, 5G0035819A, 5G0035819, 5G0035812.

* For Professional installation ONLY, requires specialist equipment and knowledge to

program vehicle on-board settings to enable camera operation.

* Camera must be activated via VCDS. Head unit must be coded.

Product specificaties