Avantco T140 Handleiding
Avantco
Broodrooster
T140
Lees hieronder de 📖 handleiding in het Nederlandse voor Avantco T140 (9 pagina's) in de categorie Broodrooster. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.7 sterren beoordeeld
Pagina 1/9
www.AvantcoEquipment.com 1
Conveyor Toaster
Models: T140
Please read and keep these instructions. Indoor use only.
06/2017
User Manual
User Manual
2 www.AvantcoEquipment.com
Installation, Operation and Care
Unpacking
General Installation and Operation Instructions
IT IS ESSENTIAL TO MAKE SURE THAT THE INCOMING VOLTAGE IS THE SAME AS THE RATED VOLTAGE
OF THE UNIT AS FOUND ON THE SERIAL PLATE. THE SERIAL PLATE IS LOCATED AT THE REAR OF THE
UNIT ADJACENT TO THE INCOMING CORD ENTRY.
1. This conveyor toaster has been designed to continuously produce toasted bread or buns. The desired toasted color
of the product can be adjusted by changing the belt speed of the conveyor. Depending on installation position, the
toasted product can be discharged to the front or rear of the unit.
2. Before operating this unit, thoroughly clean as described in the cleaning section of this manual (page 5).
ENSURE THE SUPPORT FEET ARE ASSEMBLED TO THE UNIT BEFORE COMMENCING OPERATION.
(Operation Instructions)
3. As detailed in the diagrams to the right, the unit can either be assembled with front or rear discharge depending on
installation position and preference.
i. Front Chute
a. Pull metal plate up to the closed position and latch.
1) This will direct food to the bottom of the toaster.
b. Pick up the longer of the two chutes.
c. Slide the flanged end of the chute up underneath the toaster.
d. Rest the flanged end of the chute onto the interior ledge.
Great care has been taken during the packing and shipment of your Avantco conveyor toaster. However, if you notice any
signs of damage when unpacking the unit, please call the manufacturer.
• Do not remove any tags or labels until unit is installed and working properly.
!
!
User Manual
www.AvantcoEquipment.com 3
i. FRONT DISCHARGE
FIT WIRE FEEDER
REAR PLATE MUST BE FITTED
TO PREVENT HEAT LOSS
FIT WIRE FEEDER
REAR DISCHARGE
ii
.
ii. Rear Chute
a. Push the metal plate down to the open position.
1) This will direct food to the back of the toaster.
b. Loosen the two rear screws.
c. Pick up the smaller of the two chutes.
d. Slide the two keyholes on the chute behind the loosened screws.
1) If the chute does not fit all the way down, loosen the screws more.
e. Tighten the screws to secure the chute to the toaster.
Product specificaties
| Merk: | Avantco |
| Categorie: | Broodrooster |
| Model: | T140 |
Heb je hulp nodig?
Als je hulp nodig hebt met Avantco T140 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Broodrooster Avantco
10 Juni 2025
10 Juni 2025
9 Juni 2025
Handleiding Broodrooster
- Broodrooster Catler
- Broodrooster Arcelik
- Broodrooster Jacob Jensen
- Broodrooster Elis And Elsa
- Broodrooster Braun
- Broodrooster Alpina
- Broodrooster Home Electric
- Broodrooster Gourmia
- Broodrooster Roadstar
- Broodrooster Philips
- Broodrooster First Austria
- Broodrooster Proctor Silex
- Broodrooster Brandt
- Broodrooster Sogo
- Broodrooster Gutfels
Nieuwste handleidingen voor Broodrooster
10 Juni 2025
10 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
6 Juni 2025
3 Juni 2025