Salter Ripple EK5743 Handleiding
Pagina's 2 Broodrooster
Bekijk de handleiding van Salter Ripple EK5743 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
CD270324/MD000000/V1
User manual
4-slice toaster
1. Toaster housing
2. Toaster slot
3. Loading lever
4. Cancel button [
]
5. Defrost button [
]
6. Reheat button [
]
7. Browning control dial
8. Removable crumb tray
lowered, and ‘’ has been pressed (this will remain illuminated throughout the
defrost process).
STEP 5:When the defrost setting has completed its cycle, the bread will pop
up automatically.
STEP 6:If the bread has not fully defrosted, repeat steps 3–4. To stop the cycle,
press ‘’.
STEP 7: Switch o and unplug the toaster from the mains power supply.
STEP 8:Remove the food from the toasting slots using heat-resistant oven gloves.
Gently lift the loading lever to raise the toast out of the toasting slots so that it
can be more easily removed.
Using the reheat setting
The reheat setting allows toast to be reheated which has gone cold.
STEP 1:Make sure that the crumb tray is pushed fully into the toaster and that
the toasting lever is in the upright position.
STEP 2: Plug in and switch on the toaster at the mains power supply.
STEP 3: Set the browning control dial to the desired setting.
STEP 4:Insert the cold toast into the toasting slots and lower the loading
lever until it is locked into position. Reheating will begin once the lever is fully
lowered and ‘’ has been pressed (this will remain illuminated throughout the
reheating process).
STEP 5:When the reheat setting has completed its cycle, the toast will pop
up automatically.
STEP 6: If the bread has not fully reheated, repeat steps 3–4. To stop the cycle,
press ‘’.
STEP 7: Switch o and unplug the toaster from the mains power supply.
STEP 8:Remove the food from the toasting slots using heat-resistant oven gloves.
Gently lift the loading lever to raise the toast out of the toasting slots so that it
can be more easily removed.
Automatic centring guides
Lowering the loading lever closes the centring guides and holds the bread
centrally in the toasting slots.
NOTE: The loading lever will not lock down unless the toaster is
plugged into a mains power supply and is switched on.
Crumb tray
The toaster is equipped with a crumb tray; it should be periodically emptied so
that the toaster operates correctly.
To remove the crumb tray, which is situated at the back of the toaster housing,
pull the back handle towards the user.
Empty the crumb tray and then reinsert it, pushing it until it clicks back
into position.
Storage
The toaster must be cool, clean and dry before storing in a cool, dry place.
Never wrap the cord tightly around the toaster; wrap it loosely to avoid
causing damage.
Specifications
Product code: EK5743
Input: 220–240 V ~ 50/60 Hz
Output: 1370–1630 W
1
2
3
4
5
76
8
©Salter trademark. All rights reserved.
Disposal of Waste Batteries and Electrical and Electronic Equipment
This symbol on the product, its batteries or its packaging means that this product and any
batteries it contains must not be disposed of with household waste. Instead, it is the user’s
responsibility to hand this over to an applicable collection point for the recycling of batteries
and electrical and electronic equipment. This separate collection and recycling will help to
conserve natural resources and prevent potential negative consequences for human health
and the environment due to the possible presence of hazardous substances in batteries and electrical
and electronic equipment, which could be caused by inappropriate disposal. Some retailers provide
take-back services which allow the user to return exhausted equipment for appropriate disposal. It
is the user’s responsibility to delete any data on electrical and electronic equipment prior to
disposal. For more information about where to drop batteries, electrical and electronic waste o,
please contact the local city/municipality oce, household waste disposal service, or the retailer.
Manufactured by:
Ultimate Products UK Ltd.,
Victoria Street, Manchester OL9 0DD. . UK
Ultimate Products Europe Ltd.,
19 Baggot Street Lower, Dublin D02 X658. .ROI
MADE IN CHINA.
To register for your extended guarantee, scan the QR
code or visit and register guarantee.upplc.com/salter
your product within 30 days of purchase.
For any further queries, visit www.salter.com.
Please retain instructions for future reference.
SAFETY INSTRUCTIONS
When using electrical appliances, basic safety
precautions should always be followed.
Check that the voltage indicated on the rating
plate corresponds with that of the local network
before connecting the appliance to the mains
power supply.
This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabilities
and knowledge, if they have been supervised/
instructed and understand the hazards involved.
Children shall not play with the appliance.
Children should not perform cleaning or user
maintenance, unless they are older than 8
and supervised.
This appliance is not a toy.
If the power supply cord, plug or any part of
the appliance is malfunctioning or if it has been
dropped or damaged, cease using the product
immediately to avoid potential injury.
This appliance contains no user serviceable
parts, only a qualified electrician should carry out
repairs. Improper repairs may place the user at
risk of harm.
Keep the appliance and its power supply cord out
of the reach of children.
Keep the appliance out of the reach of children
when it is switched on or cooling down.
Keep the appliance and its power supply cord
away from heat or sharp edges that could
cause damage.
Keep the power supply cord away from any parts
of the appliance that may become hot during use.
Keep the appliance away from other heat emitting
appliances.
Do not allow the power supply cord to hang over
worktops, touch hot surfaces or become twisted.
Do not immerse the electrical components of the
appliance in water or any other liquid.
Do not operate the appliance with wet hands or if
any connections are wet.
If this appliance falls or accidentally becomes
immersed in water, unplug it from the wall outlet
immediately. Do not reach into the water. Do not
leave the appliance unattended whilst connected
to the mains power supply.
Do not remove the appliance from the mains power
supply by pulling the cord; switch it o and remove the
plug by hand.
Do not pull or carry the appliance by its power
supply cord.
Do not use the appliance for anything other than its
intended use.
Do not use any accessories other than those supplied.
Do not use this appliance outdoors.
Do not store the appliance in direct sunlight or in high
humidity conditions.
Do not move the appliance whilst it is in use.
Always unplug the appliance after use and allow it to
cool fully before any cleaning, user maintenance or
storing away.
Always use the appliance on a stable, heat-resistant
surface, at a height that is comfortable for the user.
This appliance should not be operated by means of an
external timer or separate remote control system.
Use of an extension cord with the appliance is
not recommended.
This appliance is intended for domestic use only. It
should not be used for commercial purposes.
CAUTION:Hot surface – do not touch
hot sections or heating components
of the appliance.
WARNING:Keep the appliance away from
flammable materials.
Care and maintenance
STEP 1: Before attempting any cleaning or maintenance, unplug the toaster from
the mains power supply and allow to fully cool.
STEP 2: Wipe the toaster housing with a soft, damp cloth and dry thoroughly.
STEP 3: Remove crumbs from inside the base of the toaster by sliding open the
crumb tray following the instructions in the section entitled ‘’.Crumb tray
CAUTION:Do not immerse the toaster in
water or any other liquid.
Never use harsh or abrasive cleaning detergents or scourers to clean the toaster,
as this could damage the surface.
Never place fingers near or inside the toasting slots.
Always unplug the toaster and allow it to cool thoroughly before attempting to
remove any bread that has become stuck inside the toasting slot.
Take care when removing food from the toasting slots to avoid damage to the
internal mechanism and heating element.
Do not allow crumbs to build up inside the base of the toaster. Empty the crumb
tray periodically.
Do not operate the toaster without bread, as this may cause damage to
the toaster.
Instructions for use
Before first use
Before using the toaster for the first time, wipe the toaster housing with a soft,
damp cloth and dry thoroughly.
NOTE: When using the toaster for the first time, a slight smoke or
odour may be emitted. This is normal and will soon subside. Allow
for sucient ventilation around the toaster.
Instructions for use
Using the toaster
STEP 1: Place the toaster onto a flat, stable, heat-resistant surface at a height that
is comfortable for the user. Make sure that the crumb tray is pushed fully into the
toaster housing and that the toasting lever is in the upright position, with no bread
or other objects inserted to the toasting slots.
STEP 2:
Plug in and switch on the toaster at the mains power supply.
STEP 3:Turn the browning control dial to the desired setting. Select 3–4 for
medium brown toast.
STEP 4: Insert the bread or food to be toasted and lower the loading lever until it
is locked into place. Toasting will begin when the lever is fully down.
STEP 5:When the bread reaches the desired browning level, the toast will pop
up automatically.
STEP 6: Turn the toaster o and unplug it from the mains power supply.
STEP 7:Remove the food and any crumbs from the toasting slots using heat-
resistant gloves. Gently lift the loading lever to raise the food out of the toasting
slots so that it can be more easily removed.
NOTE:To interrupt toasting mid-setting, press ‘
’. The cancel
button will remain illuminated throughout the toasting cycle.
CAUTION:Do not toast pastries with runny
fillings or frosting. Do not toast torn slices of
bread. Do not allow bread to burn.
WARNING:Never use a fork or sharp-edged
utensil to remove toast, as this may damage
the heating element or cause injury.
Using the defrost setting
The defrost setting allows bread to defrost or it can toast bread from frozen.
STEP 1:Make sure that the crumb tray is pushed fully into the toaster and that
the toasting lever is in the upright position.
STEP 2: Plug in and switch on the toaster at the mains power supply.
STEP 3: Set the browning control dial to the desired setting.
STEP 4:Insert the frozen bread into the toasting slots and lower the loading
lever until it is locked into position. Defrosting will begin once the lever is fully
Product specificaties
| Merk: | Salter |
| Categorie: | Broodrooster |
| Model: | Ripple EK5743 |
Heb je hulp nodig?
Als je hulp nodig hebt met Salter Ripple EK5743 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden