Avantco 177HWDA2 Handleiding


Bekijk gratis de handleiding van Avantco 177HWDA2 (5 pagina’s), behorend tot de categorie Koffiezetapparaat. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.3 sterren uit 2 reviews. Heb je een vraag over Avantco 177HWDA2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/5
User Manual
1 www.AvantcoEquipment.com
Hot Water Dispenser
Models: 177HWDA2
Please read and keep these instructions. Indoor use only.
12/2022
User Manual
2 www.AvantcoEquipment.com
Safety Information
WARNING: Failure to comply with all requirements in this manual may lead to safety hazards and void warranty.
This appliance is designed for COMMERCIAL USE ONLY.
DO NOT use outdoors.
damage unit.
Cleaning & maintenance should only be performed by properly trained persons with supervision.
Children should be supervised to ensure that they do not play with the appliance.
CAUTION:
ALWAYS place appliance on stable surface in a fully vertical position.
ALWAYS unplug unit from power supply before cleaning or servicing.
ALWAYS use caution when touching unit, surfaces are hot and can cause burns.
NOTICE:
ALWAYS use on a circuit that is properly protected and capable of the rated load.
Electronically ground the chassis.
DO NOT use an extension cord.
5021062 5021062
User Manual
3 www.AvantcoEquipment.com
Installation
NOTE: Please use filtered and softened water. If using ground or tap water, please soften it first. Unsoftened water will
decompose dissolvable minerals and turn into limescale after boiling. The limescale will reduce the machine's
thermal efficiency and lifetime.
1. Carefully unpack the hot water dispenser and check for damage and missing parts.
2. Place hot water dispenser on sturdy, level, heat-resistant, non-flammable surface near power supply and water
supply. Do not connect water line or power cord at this time.
3. Attach the water line to the inlet located on the rear of the dispenser. Hold the water inlet fitting with a wrench when
tightening the water line.
4. Turn on the water supply. Make sure to check for leaks at the water inlet. Tighten fitting if necessary.
5. Connect power supply cord into proper power supply as indicated on the nameplate of the machine. Make sure the
machine is switched OFF before connecting to the power supply.
CHECK BEFORE STARTING:
1. The power cord should be connected to a 110/120V outlet.
2. The water line should be connected and not leaking.
3. The dispenser should be installed on a level, stable surface.
Recommended Accessories
Item Number Description
790OCLOKITLG C Pure Oceanloch-L Water Filtration System & Pressure Gauge
147LIMEBGONE1G Lime B Gone, Noble Delimer/Descaler
A. Tray
B. Drain Outlet
C. Water Inlet
D. Inlet Pipe
E. Water Faucet
F. 110-120V


Product specificaties

Merk: Avantco
Categorie: Koffiezetapparaat
Model: 177HWDA2

Heb je hulp nodig?

Als je hulp nodig hebt met Avantco 177HWDA2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden