Autel MaxiVideo MV105S/108S Handleiding

Autel Niet gecategoriseerd MaxiVideo MV105S/108S

Lees hieronder de 📖 handleiding in het Nederlandse voor Autel MaxiVideo MV105S/108S (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Email: sales@autel.com
Web: www.autel.com 1
1. Imager Head Cable
2. Handgrip
3. USB Cable
NOTE: The power of the MaxiVideo tool is directly supplied
by the USB port, and no external power source is needed.
The MaxiVideo Inspection Camera kit is supplied with useful accessories,
such as magnet, hook, and mirror, which enable you to perform special tasks.
For MV108S (with 8.5 mm imager head)
For MV105S (with 5.5 mm imager head)
PRODUCT INTRODUCTION
TECHNICAL SPECIFICATIONS
Digital Inspection Camera
MAXIVIDEO MV105S/108S
1
2
3
Description
MV108S: 8.5 mm; MV105S: 5.5 mm
MV108S: 2 MP; MV105S: 1 MP
MV108S: 1920 x 1080
MV105S: 1280 x 720
MV108S: 3 cm to 8 cm (1.18 to 3.15”)
MV105S: 2 cm to 10 cm (0.79 to 3.94)
8 pcs
1 m (39.37")
IP67
-10 °C to 70 °C (14 °F to 158 °F )
-10 °C to 70 °C (14 °F to 158 °F )
Insert the USB cable into the USB
port on the tablet.
2
Remove the protective cover from
the imager head.
3
Power up your Autel tablet. Select the
MaxiVideo application from the Job
Menu. You can use it now.
1. Mirror
helps to look around corners and see the unreachable areas.
2. Hook
unclogs obstacles and picks up wires in the pipes or confined areas.
3. Magnet
picks up small iron objects, such as dropped rings or screws.
The three accessories including the magnet, hook,, and mirror, can be attached
to the imager . Hold the accessory and the head as described imager head.
Slip the end of the accessory ove it as shown.r the imager head and then fix
The two accessories, both the magnet and mirror, can be attached to the
imager head as described. Remove the sleeve tube from the imager head. Hold
the accessory and the imager head as shown. Screw the thread part of the
accessory over the imager head and then fix it.
1. Mirror
helps to look around corners and see the unreachable areas.
2. Magnet
picks up small iron objects, such as dropped rings or screws.
8.5 mm Imager Head Accessories
5.5 mm Imager Head Accessories
Imager Head Accessories
The accessory assembly is as simple as the picture shows!
8.5 mm
5.5 mm
8.5 mm
5.5 mm
Item
Imager Head Distance
Camera
Resolution
Depth of Field
LED Beads
Imager Head Cable Length
Waterproof Level (Imager Head)
Operating Temp.
Storage Temp.
IT ONLY TAKES 3 STEPS TO START!
The MV105S/108S digital inspection camera is designed to work
with Autel diagnostic tablets. It turns your Autel tablet into a video
inspection scope, allowing you to examine difficult-to-reach areas
normally hidden from sight. It is capable of recording digital still
images and videos, which offers you an economical solution to
inspect machinery, facilities, and infrastructure in a safe and
quick way.
NOTE:
Not all Autel tablets have the MaxiVideo application installed. Please confirm whether your tablet supports this function before use.
The tablet in the picture is for illustration only. Different tablet models may have different appearance and screens.
used for viewing image and video.
ergonomically designed handle for comfortable
grips and agile operation.
connects the Digital Inspection Camera to
the Autel tablet.


Product specificaties

Merk: Autel
Categorie: Niet gecategoriseerd
Model: MaxiVideo MV105S/108S

Heb je hulp nodig?

Als je hulp nodig hebt met Autel MaxiVideo MV105S/108S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Autel

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd