Autel AutoLink AL519 Handleiding

Autel Niet gecategoriseerd AutoLink AL519

Lees hieronder de 📖 handleiding in het Nederlandse voor Autel AutoLink AL519 (72 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/72

Table of Contents

1. SAFETY PRECAUTIONS AND WARNINGS ............................................ 1

2. GENERAL INFORMATION ...................................................................... 2

2.1 O -B N OARD IAGNOSTICS D (OBD) II ........................................................... 2

2.2 D IAGNOSTIC ROUBLE T CODES (DTCS) ...................................................... 2

2.3 L OCATION OF THE DATA ONNECTOR LINK C (DLC) ................................... 3

2.4 R OBD II EADINESS MONITORS ................................................................. 4

2.5 OBD II MONITOR READINESS STATUS ...................................................... 5

2.6 D OBD II EFINITIONS 6................................................................................

2.7 OBD II MODES OF OPERATION ................................................................. 7

3. USING THE SCAN TOOL ........................................................................ 10

3.1 T OOL DESCRIPTION ................................................................................ 10

3.2 S PECIFICATIONS 12.....................................................................................

3.3 A I CCESSORIES NCLUDED ......................................................................... 12

3.4 N AVIGATION CHARACTERS ..................................................................... 13

3.5 K EYBOARD ............................................................................................. 13

3.6 P OWER ................................................................................................... 13

3.7 L DTC OOKUP ......................................................................................... 13

3.8 S S YSTEM ETUP ........................................................................................ 15

3.9 A BOUT .................................................................................................... 24

3.10 V EHICLE COVERAGE............................................................................... 24

3.11 P RODUCT TROUBLESHOOTING ................................................................ 25

4. 27 REVIEW DATA.........................................................................................

5. OBDII DIAGNOSTICS.............................................................................. 29

5.1 R EADING CODES ..................................................................................... 31

5.2 E RASING CODES...................................................................................... 34

5.3 L D IVE ATA 35.............................................................................................

5.4 V F F D IEWING REEZE RAME ATA .............................................................. 47

5.5 R ETRIEVING I/M READINESS STATUS ...................................................... 48

5.6 M O2 ONITOR TEST ................................................................................. 54

5.7 O -B N OARD ONITOR M TEST..................................................................... 56

5.8 C OMPONENT TEST .................................................................................. 59

5.9 V V I IEWING EHICLE NFORMATION ........................................................... 60

5.10 M P ODULES RESENT................................................................................. 62

5.11 C B ODE REAKER ...................................................................................... 62

6. READY TEST............................................................................................ 64

6.1 G I ENERAL NFORMATION ......................................................................... 64

6.2 R EADY T AEST PPLICATION ..................................................................... 64

6.3 T I LED AND ONE NTERPRETATION ........................................................... 67

7. PRINT DATA............................................................................................. 69

8. 71 WARRANTY AND SERVICE...................................................................

8.1 L IMITED NE O YEAR ARRANTY W ............................................................. 71

8.2 S P ERVICE ROCEDURES ............................................................................ 71

1. Safety Precautions and Warnings

To prevent personal injury or damage to vehicles and/or the scan

tool, read this instruction manual rst and observe the following

safety precautions at a minimum whenever working on a vehicle:

 Always perform automotive testing in a safe environment.

 Wear safety eye protection that meets ANSI standards.

 Keep clothing, hair, hands, tools, test equipment, etc. away from

all moving or hot engine parts.

 Operate the vehicle in a well ventilated work area: Exhaust gases

are poisonous.

 Put blocks in front of the drive wheels and never leave the vehicle

unattended while running tests.

 Use extreme caution when working around the ignition coil,

distributor cap, ignition wires and spark plugs. These

components create hazardous voltages when the engine is

running.

 Put the transmission in PARK (for automatic transmission) or

NEUTRAL (for manual transmission) and make sure the parking

brake is engaged.

 Keep a fire extinguisher electrical suitable for gasoline/chemical/

fires nearby.

 Don’t connect or disconnect any test equipment while the

ignition is on or the engine is running.

 Keep the scan tool dry, clean, free from oil/water or grease. Use a

mild detergent on a clean cloth to clean the outside of the scan

t ool when necessary.

2. General Information

2.1 On-Board Diagnostics (OBD) II

The first generation of On- s Board Diagnostic (called OBD I) was

developed by the California Air Resources Board (ARB) and

implemented in 1988 to monitor some of the emission control

components on vehicles. As technology evolved and the desire to

improve the On-Board Diagnostic system increased, a new generation

of On Board Diagnostic system was developed. This second -

generation of On- Board Diagnostic regulations is called "OBD II".

The OBD II system is designed to monitor emission control systems

and key engine components by performing either continuous or

periodic tests of specific components and vehicle conditions. When a

problem is detected, the OBD II system turns on a warning lamp (MIL)

on the vehicle instrument panel to alert the driver typically by the

phrase of “Check Engine” or “Service Engine Soon”. The system will

also store important information about the detected malfunction so

that a technician can accurately nd and x the problem. Here below

follow three pieces of such valuable information:

1) Whether the Malfunction Indicator Light (MIL) is

commanded 'on' or 'off';

2) Which, if any, Diagnostic Trouble Codes (DTCs) are stored;

3) Readiness Monitor status.

2.2 Diagnostic Trouble Codes (DTCs)

OBD II Diagnostic Trouble Codes are codes that are stored by the

on-board computer diagnostic system in response to a problem found

in the vehicle. These codes identify a particular problem area and are

intended to provide you with a guide as to where a fault might be

occurring within a vehicle. OBD II Diagnostic Trouble Codes

consists -of a five digit alphanumeric code. The first character, a letter,

identifies which control system sets the code. The other four

characters, all numbers, provide additional information on where the

Product specificaties

Merk:	Autel
Categorie:	Niet gecategoriseerd
Model:	AutoLink AL519

Heb je hulp nodig?

Als je hulp nodig hebt met Autel AutoLink AL519 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Autel

Autel Alpha Handleiding

5 April 2024

Autel MaxiCOM MK900 Handleiding

23 Maart 2024

Autel MaxiCOM MK900-TS Handleiding

23 Maart 2024

Autel MaxiCOM MK908 Pro Handleiding

23 Maart 2024

Autel Mapper Handleiding

5 Januari 2024

Autel EVO Max 4N Handleiding

3 Augustus 2023

Autel MaxiCheck MX808S-TS Handleiding

26 Juli 2023

Autel MaxiDAS DS808S Handleiding

26 Juli 2023

Autel MaxiCheck MX808S Handleiding

26 Juli 2023

Autel MaxiCheck MX900 Handleiding

8 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024