Autel MaxiHVAC AC909 Handleiding


Pagina's 6 Niet gecategoriseerd

Bekijk de handleiding van Autel MaxiHVAC AC909 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag

Thank you for purchasing this AUTEL diagnostics tools. Autel manufactures its tools to the highest standards. If properly
maintained and used according to instructions, the tools will provide years of trouble-free use.
Product Description
Web: www.autel.com
Quick Reference Guide
MaxiHVAC AC909
Top View
Bottom View
Rear View
The MaxiHVAC AC909 has five main components:
1. 10.1-inch TFT-LCD Capacitive Touchscreen
2. Ambient Light Sensor — detects ambient brightness.
3. Power LED — refer to Table 1-1 Power LED Description for details.
4. Built-in Microphone
5. Slide Switch
6. Speaker
7. Collapsible Stand — extends from the back to allow hands-free
viewing of the MaxiHVAC tablet.
8. Camera Flash
9. Rear Camera
10. Micro SD Card Slot
11. USB Port
12. USB Port
13. Headphone Jack
14. USB Type-C Port — supports charging.
15. DC Power Supply Input Port
16. Hanging Ring — used for hanging the MaxiHVAC tablet on a hook.
17. Lock/Power Button — long press to power on/off the MaxiHVAC
tablet, or tap to lock the screen.
18. Pogo Pin Socket — used to power and charge the AC Box when
connected to the pogo pin connector on the AC Box.
19. Socket
20. Locking Latch
• MaxiHVAC Tablet — the central processor and monitor for the system
• MaxiFlash LVCI — the vehicle communication interface
•AC Box — the wireless manifold gauge
• TPC-B/TPC-R — the wireless temperature clamp
• THP-B/THP-R — the wireless temperature and humidity probe
1
6
9
101213141511
1617
19
18
2019
8
7
2
3
5
4
MaxiHVAC Tablet
1
MaxiFlash LVCI
AC Box
Table 1-1 Power LED Description
LED
Power
ColorDescription
Green
Yellow
Red
• Lights solid green when the MaxiHVAC tablet is charging and the battery level is above 90%.
• Lights solid green when the MaxiHVAC tablet is powered on and the battery level is above 15%.
Lights solid yellow when the MaxiHVAC tablet is charging and the battery level is below 90%.
Lights solid red when the MaxiHVAC tablet is powered on and the battery level is below 15%.
Table 1-2 Power LED Description
LED
Power
ColorDescription
Yellow
Green
Red
Lights solid green when powered on.
Lights solid yellow automatically at power-up when VCI is performing a self-test.
• Lights solid red when a system failure occurs.
• Flashes red when VCI is upgrading.
Front View
Front View
Top ViewBottom View
45
1
2
3
6
1. Vehicle LED — flashes green when communicating with vehicle system.
2. Power LED — refer to Table 1-2 Power LED Description for details.
3. Connection LED — lights solid green when connected to the MaxiHVAC tablet via USB cable;
lights solid blue when connected to the MaxiHVAC tablet via Bluetooth.
4. DC Power Supply Input Port
5. Vehicle Data Connector (DB15-pin)
6. USB Port
1. Backlight Button — press to turn on/off the sight glass backlight.
2. Low Pressure Valve
3. Vacuum Valve
4. Status LED — refer to Table 1-3 Status LED Description for details.
5. Refrigerant Valve
6. High Pressure Valve
7. Power Button — long press to power on/off the device.
8. Sight Glass
17
8
23564
2
TPC-B/TPC-R
Table 1-3 Status LED Description
LED
Status
ColorDescription
Yellow
Green
Blue
Red
Lights solid green when the AC Box is powered on and the battery level is above 20% or when
the AC Box is charging and the battery level is above 90%.
• Flashes yellow when the AC Box is upgrading its software.
• Lights solid yellow when the AC Box is performing a self-test or when a Bluetooth error occurs
during self-test.
• Lights solid red when the AC Box is powered on and the battery level is lower than 20%.
• Flashes red when the AC Box is charging and the battery level is lower than 90%.
• Lights solid blue when the AC Box is connected via Bluetooth, but there is no data being transmitted.
• Flashes blue when transmitting Bluetooth data.
Right ViewFront View
2
1
1. Battery Compartment — holds 2 x AAA batteries. Slide the latch switch
to the Unlock position to open the cover. Slide the latch switch to the
Lock position to secure the cover.
2. Power Button/Status LED — long press to power on/off the device. Refer
to Table 1-4 Status LED Description for details on status LED.
9. Pogo Pin Connector — used to power and charge the AC Box when connected to the pogo pin socket on the MaxiHVAC tablet.
10.Latch
11. Self-locking Toggle Lever
12. Foldable Hook — used for hanging the AC Box on a hook when not connected to the MaxiHVAC tablet.
13. Low Pressure Port — connects the low pressure hose.
14. Low Pressure Storage Port
15. Vacuum Port — connects the vacuum hose.
16. Vacuum Storage Port
17. USB Type-C Port — used for charging.
18. Refrigerant Port — connects the refrigerant hose.
19. Refrigerant Storage Port
20. High Pressure Port — connects the high pressure hose.
21. High Pressure Storage Port
Top ViewBottom View
91010
11
12
13
14
162119
17
1520
18
3

Beoordeel deze handleiding


Product specificaties

Merk: Autel
Categorie: Niet gecategoriseerd
Model: MaxiHVAC AC909

Heb je hulp nodig?

Als je hulp nodig hebt met Autel MaxiHVAC AC909 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden