Aurel MCAUHF479 Handleiding


Pagina's 1 Engels Receiver

Bekijk de handleiding van Aurel MCAUHF479 gratis online of download de PDF. 75 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag

Application note • Nota applicativamod.M.C.A.
This information may be subject to revision without notice. AUR°EL makes no warranty and assumes no liability in connection with any use of this information .
Variazioni senza preavviso delle presenti informazioni non implicano responsabilità da parte AUR°EL. L'acquirente assume ogni responsabilità derivante dall'uso del prodotto.
B) Piano di foratura del collegamento meccanico
al circuito di GND.
A) Collegamenti elettrici
Connessione tipica con MAV-VHF 224
Utilizzare un circuito stampato a doppia faccia.
• con FR4 da 1 mm la linea a 50 è larga 1,8 mm ;Ω
• con FR4 da 1,6 mm la linea a 50 è larga 2,9 mm ;Ω
Collegare tutti i pin, tenendo i collegamenti corti.
Inserire l’ Attenuatore da 2÷3 dB fra MAV-VHF 224e
M.C.A. per ottenere una Intermodulazione di 60 dB.
Utilize a two lawer PCB.
• with 1 mm thick FR4 the 50 line is 1,8 mm wide ;Ω
• with 1,6 mm thick FR4 the 50 line is 2,9 mm wide ;Ω
Connect all the pins with very short connections.
Install the 2÷3 dB Attenuator between MAV-VHF 224
and to have a 60 dB Intermodulation.M.C.A.
A) Electrical connections
Typical connection with MAV-VHF 224
B) Drilling plan for mechanical connection to
GND circuit.
20 (*)
F3.5
* Minimum distance from printed circuit,
when connected to a vertical plate (i.e. metal case)
StripLineStripLine (On 50÷75 Load)W
OUT
Audio IN
Video IN+Enable
2 x 10µF-25V
+5V +12V
MAV-VHF 224M.C.A.
CONNECT to GND
20 (**)
** Minimum distance from pass-thru holes,
when horizontally lain on the PCB.
R1 R1
R2
R1
R2
OPTIONAL
vm
3dB
2dB
8.2 Ohm5.6 Ohm
150 Ohm
120 Ohm
1-1

Beoordeel deze handleiding


Product specificaties

Merk: Aurel
Categorie: Receiver
Model: MCAUHF479

Heb je hulp nodig?

Als je hulp nodig hebt met Aurel MCAUHF479 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden