AudioSource AD1002 Handleiding

Bekijk gratis de handleiding van AudioSource AD1002 (4 pagina’s), behorend tot de categorie Receiver. Deze gids werd als nuttig beoordeeld door 53 mensen en kreeg gemiddeld 4.7 sterren uit 8 reviews. Heb je een vraag over AudioSource AD1002 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

OWNER’S MANUAL

AD1002

AudioSource®

13970 SW 72nd Ave

Portland, OR 97223

503.914.4688

www.audiosource.net

AD1002 Owner’s Manual 51115

Congratulations on your purchase of the AudioSource® AD1002.

Please take a few moments to read this entire manual, and be sure to

retain this document for future reference. Please read and observe all

safety instructions detailed on page 2.

NOTE: If any part of this product is damaged or missing, please call your

dealer or AudioSource® directly at 1.877.715.5439 or 503.914.4688.

Please read your warranty and retain your receipt and original carton

for possible future use.

For more information about AudioSource® electronics, speakers and

accessories please visit www.audiosource.net

AD1002

Digital Stereo Power Amplifier

FEATURES:

MAIN / INTERRUPT priority input switching

MAIN auxiliary output

Speaker A/B switching

Front panel Balance and Volume controls

Signal sensing “Power On” and Trigger mode

SPECIFICATIONS

Stereo (8 ohm):50W per channel, <1% THD+N

Stereo (4 ohm):75W per channel, <1% THD+N

Bridged Mono (8 ohm):160W, 1kHz, <1% THD+N

Frequency Response:10Hz ~ 30kHz, -2dB/ +1dB

Signal to Noise Ratio:100dB below 50W output into 8 ohms

w/20kHz Lowpass filter

Channel Separation: 65dB @ 1kHz, referred to 50W output

into 8 ohms

Input Sensitivity:700mV input for rated 50W output

into 8 ohms

AC Power Consumption:200W maximum

Net Weight:4.7lbs / 2.2kgs

Gross Weight: 6.8lbs / 3kgs

2.15”

(55mm)

16.9”(430mm)

7.65”

(194mm)

Left

Right

Balance

Volume

SPEAKERS

AB

AD1002

Min

Max

POWER

Rear mounted treble and bass controls

Bass/Treble Control:+/- 12dB @ 100Hz and 10kHz

DIGITAL

STEREO POWER AMPLIFIER

Product specificaties