Audio-Technica XM5S-SV Handleiding

Bekijk gratis de handleiding van Audio-Technica XM5S-SV (88 pagina’s), behorend tot de categorie Microfoon. Deze gids werd als nuttig beoordeeld door 41 mensen en kreeg gemiddeld 4.3 sterren uit 7 reviews. Heb je een vraag over Audio-Technica XM5S-SV of wil je andere gebruikers van dit product iets vragen? Stel een vraag

UNIDIRECTIONAL DYNAMIC MICROPHONE

Audio-Technica’s Xtreme Series are high-output design, excellent

sound and rugged, all-metal construction, this totally redesigned

series creates a new standard in affordable vocal microphones.

There are four models - XM1S, XM3S, XM5S and XM5S-SV in Xtreme

Series.

- High-output design for vocals that cut through the mix.

- Unidirectional dynamic element design.

- XM3Smicrophone is tailored frequency response, also used for

optimal instrument reproduction.

- XM5Smicrophone is extended frequency response for optimal vocal

reproduction.

- XM5S-SV microphone is nished with silver colour plated, for

dazzlingly exhibit on the stage.

- Corrosion-resistant contacts from gold-plated XLRM-type

connectors.

- Rugged all-metal construction for reliable performance.

- Cardioid polar pattern reduces pickup of sounds from the sides and

rear, improving isolation of desired sound source.

Output from the microphone’s XLRM-type connector is low

impedance (Lo-Z) unbalanced. The signal appears across Pins 2; Pin

1 is ground (shield). Output phase is “Pin 2 hot” – positive acoustic

pressure produces positive voltage at Pin 2.

Plug TypeGroundAudio “+”

XLRPin 1 / Pin 3Pin 2

6.3mm TSSleeveTip

To avoid phase cancellation and poor sound, all mic cables must

be wired consistently: Pin 1-to-Pin 1, etc. For a high-impedance

(Hi-Z) mic input, connect a Lo-Z balanced cable to a Hi-Z matching

transformer (A-T CP8201 or equal) at the equipment input.

When using the microphone in settings with a stage monitor speaker,

the speaker should be located 135° off axis (45° off the rear of the

microphone). This placement, in conjunction with the microphone’s

uniform cardioid pickup pattern, will virtually eliminate the possibility

of undesired audio feedback.

Take care to keep foreign particles from entering the windscreen.

An accumulation of iron or steel filings on the diaphragm, and/or

foreign material in the windscreen’s mesh surface, can degrade

performance.

FORM No. ATGC-L0136-08-E

Machida • Tokyo • Japan

SPECIFICATIONS

ELEMENT Dynamic

POLAR PATTERNCardioid

FREQUENCY RESPONSE80-15,000 Hz

75-15,000 Hz

60-18,000 Hz

OPEN CIRCUIT SENSITIVITY-53 dB (2.2 mV) re 1V at 1 Pa

-54 dB (1.9 mV) re 1V at 1 Pa

-54 dB (1.9 mV) re 1V at 1 Pa

IMPEDANCE500 ohms

600 ohms

600 ohms

WEIGHT (less cable)250 g

270 g

250 g

DIMENSIONS

169.0 mm - long, 52.0 mm - head diameter

169.0 mm - long, 42.0 mm - head diameter

167.0 mm - long, 50.0 mm - head diameter

OUTPUT CONNECTORIntegral 3-pin XLRM-type

CABLE5m cable with XLRF-type connector at

microphone and 6.3mm plug

ACCESSORIES FURNISHEDStand clamp for ⅝”-27 threaded stand;

⅝”-27 to ⅜”-16 threaded adapter

1 kHz

0°

330°

300°

270°

240°

210°

180°

150°

120°

90°

60°

30°

Polar Pattern

SCALE IS 5 DECIBELS PER DIVISION

LEGEND

10 dB

20k10k5k2k1k50020010050

Frequency Response

Frequency in Hertz

LEGEND 12” or more on axis

Response in dB

1 kHz

0°

330°

300°

270°

240°

210°

180°

150°

120°

90°

60°

30°

Polar Pattern

SCALE IS 5 DECIBELS PER DIVISION

LEGEND

10 dB

20k10k5k2k1k50020010050

Frequency Response

Frequency in Hertz

LEGEND 12” or more on axis

Response in dB

1 kHz

0°

330°

300°

270°

240°

210°

180°

150°

120°

90°

60°

30°

Polar Pattern

SCALE IS 5 DECIBELS PER DIVISION

LEGEND

10 dB

20k10k5k2k1k50020010050

Frequency Response

Frequency in Hertz

LEGEND 12” or more on axis

Response in dB

Product specificaties