Audio-Technica PRO 24-CM Handleiding

Audio-Technica Microfoon PRO 24-CM

Bekijk gratis de handleiding van Audio-Technica PRO 24-CM (1 pagina’s), behorend tot de categorie Microfoon. Deze gids werd als nuttig beoordeeld door 19 mensen en kreeg gemiddeld 4.8 sterren uit 10 reviews. Heb je een vraag over Audio-Technica PRO 24-CM of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/1

Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224

Audio-Technica Limited, Old Lane, Leeds LS11 8AG England

www.audio-technica.com

SCALE IS 5 DECIBELS PER DIVISION

Polar Pattern

LEGEND

1 kHz

240

180

210

270

300

330

150

120

1 kHz

LEFT RIGHT

12" or more on axis

10050 200

LEGEND

10k5k1k500 2k 20k

Frequency in Hertz

Frequency Response

Response in dB

10 dB

• Compact, lightweight stereo condenser microphone designed for any

camcorder with an accessory shoe and stereo microphone input

• Also suitable for a wide range of stereo applications, including field

recording and studio use (with accessories available separately)

• Offers the convenience of high-quality stereo pickup in a single

microphone

• Battery-free operation when used with recording devices that

provide plug-in power at the mic input

• Pair of cardioid condenser elements in X/Y configuration provides

the spatial impact and realism of a live sound field

• Professional condenser circuitry ensures excellent sound quality

• On/off switch for convenient operation

• Permanently attached 6"-12" coiled cable with right-angle molded

3.5 mm stereo mini-plug at output end

• Includes camera-mount, windscreen, battery and protective pouch

The PRO 24-CM is a compact, lightweight stereo condenser microphone

ideal for use with camcorders that are equipped with a 3.5 mm (1/8") stereo

microphone input and an accessory shoe. The microphone is designed for

either battery operation or for battery-free operation when used with

camcorders (or other recording devices) that provide plug-in power (2-10

volts DC) at the mic input. If used without plug-in power, install the battery

before attempting use. If used with a recording device equipped for plug-in

power, simply plug the microphone cable's stereo mini-plug directly into the

recording device's microphone input. No battery is needed when the

PRO 24-CM is used with plug-in power.

To mount the PRO 24-CM on your camcorder:

1) Slide the microphone into the included camera-mount.

2) Slide the camera-mount into your camcorder's accessory shoe.

3) Tighten the mounting knob so the camera-mount is held securely in

place.

4) Connect the 3.5 mm stereo mini-plug to the MIC input on your camcorder.

Battery installation: Unscrew the lower section of the microphone and slide

it down to reveal the battery compartment. Insert the battery, being certain

to observe polarity as indicated (+ end toward the front of the microphone).

Close and secure the cover. Remove the battery during long-term storage.

The PRO 24-CM is equipped with an ON/OFF switch for convenient

operation. When you use the microphone, turn the power switch ON. Turn

the switch OFF after use.

Output for each stereo channel is low impedance (Lo-Z) unbalanced. The

permanently attached 152.4 mm - 304.8 mm (6"-12") coiled cable features a

right-angle molded 3.5 mm stereo mini-plug at the output end.

Locating the PRO 24-CM nearer the sound source enhances the width of

the stereo image, while decreasing room ambience. Conversely, as the mic

position moves away from the sound source, a narrower left/right stereo

image results, and more of the “room sound” is noted.

Avoid leaving the microphone in the open sun or in areas where temperatures

exceed 110° F (43° C) for extended periods. Extremely high humidity should

also be avoided.

PRO 24-CM SPECIFICATIONS †

ELEMENTS Fixed-charge back plate

permanently polarized condenser

POLAR PATTERN X/Y Stereo

FREQUENCY RESPONSE 100-17,000 Hz

OPEN CIRCUIT SENSITIVITY –50 dB (3.1 mV) re 1V at 1 Pa*

IMPEDANCE 600 ohms

MAXIMUM INPUT SOUND LEVEL 119 dB SPL, 1 kHz at 1%T.H.D.

SIGNAL-TO-NOISE RATIO 157 dB, 1 kHz at 1 Pa*

DYNAMIC RANGE (typical) 82 dB, 1 kHz at Max SPL

POWER REQUIREMENTS 2-10V DC plug-in power

BATTERY TYPE 1.5V LR44

BATTERY CURRENT / LIFE 0.6 mA / 200 hours typical

SWITCH On/off

WEIGHT 111 g (3.9 oz)

DIMENSIONS 116.5 mm (4.59") long,

21.0 mm (0.83") maximum body

diameter

OUTPUT CONNECTOR 3.5 mm stereo mini-plug on cable

CABLE Permanently attached 152.4 mm -

304.8 mm (6"-12") coiled cable with

right-angle molded 3.5 mm stereo

mini-plug at output end

ACCESSORIES FURNISHED Video-camera shoe mount; LR44

battery; windscreen; soft protective

pouch

†In the interest of standards development, A.T.U.S. offers full details on its test

methods to other industry professionals on request.

*1 Pascal = 10 dynes /cm2= 10 microbars = 94 dB SPL

1Typical, A-weighted, using Audio Precision System One.

Specifications are subject to change without notice.

PRO 24-CM STEREO CONDENSER MICROPHONE

Product specificaties

Merk:	Audio-Technica
Categorie:	Microfoon
Model:	PRO 24-CM
Gewicht:	111 g
Stroombron:	DC
Connectiviteitstechnologie:	Bedraad
Levensduur accu/batterij:	200 uur
Soort voeding:	DC
Stroomverbruik:	0.6 mA
Gevoeligheid microfoon:	50 dB
Operating voltage:	2 V
Frequentie microfoon:	100 - 17000 Hz
Microphone input impedance:	600 Ohm
Batterijtechnologie:	Alkaline
Type batterij:	AA