Audac RMA40A Handleiding

Audac Speaker RMA40A

Lees hieronder de 📖 handleiding in het Nederlandse voor Audac RMA40A (2 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
INSTALLATION MANUAL
RMA40A LIGHT TRACK ADAPTER MOUNT FOR ATEO4 WITH INCLINE
STEP 1 STEP 2
Press the bolt and spring in the center position of the
adapter, making the inner metal part of the adapter
moving out of the surrounding part.
Tip:
If strong forces have to be applied, the tension can
be reduced by releasing the bolt a couple of turns.
The inner metal part moves out of the surrounding
part and can be inserted through the light track rail by
aligning it with with the slot opening (rotating about
30° counterclockwise).
STEP 3
When aligned, slide the adapter in the rail and lock it
in place through pushing it inside and giving it a 30°
clockwise rotation.
STEP 4
When inserted, release the bolt and tighten it for a
more stable î ´xation. The light track adapter is now
locked in place and ready for getting the ATEO4
speaker assembled. Mount the wall plate of the ATEO4
speaker to the RMA40 through inserting and tightening
the 4 screws to the provided holes.
The WEEE marking indicates that this product
should not be disposed with regular household
waste at the end of its product life. This regulation
is created to protect both the environment and
human health.
This product is developed and manufactured with
high quality materials and components which can
be recycled and/or reused. Please dispose of this
product at your local collection point or recycling
center for electrical and electronic waste. Do this
to make sure that the product is recycled in an
environmental friendly way, and help to protect
the environment in which we all live.
INSTALLATION MANUAL
RMA40A LIGHT TRACK ADAPTER MOUNT FOR ATEO4 WITH INCLINE
•
IF THERE IS ANY DAMAGE TO THE CARTON BOX
OR THE UNIT ITSELF, INFORM YOUR VENDOR
IMMEDIATELY.
•
ALWAYS FOLLOW THE LOCAL REGULATIONS AND
REQUIREMENTS REGARDING INSTALLATION,
SUSPENSION AND CONNECTION OF THIS
LOUDSPEAKER. EVEN WHEN OTHERWISE SPECIFIED
IN THIS DOCUMENT.
• THE INSTALLATION OF THIS LOUDSPEAKER SHALL
BE DONE BY QUALIFIED PERSONNEL ONLY.
•
ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE
REFERENCE. NEVER THROW THEM AWAY
• ALWAYS HANDLE THIS UNIT WITH CARE
• CLEAN ONLY WITH DRY CLOTH
•
HEED ALL WARNINGS AND FOLLOW ALL
INSTRUCTIONS
•
NEVER EXPOSE THIS EQUIPMENT TO RAIN,
MOISTURE, ANY DRIPPING OR SPLASHING LIQUID.
•
DO NOT INSTALL THIS UNIT NEAR ANY HEAT
SOURCES SUCH AS RADIATORS OR OTHER
APPARATUS THAT PRODUCE HEAT
•
DO NOT PLACE THIS UNIT IN ENVIRONMENTS
WITH A HIGH LEVEL OF DUST, HEAT, MOISTURE OR
VIBRATION
• THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY.
DO NOT USE IT OUTDOORS
•
ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED
BY THE MANUFACTURER.
•
ONLY INSTALL THE SPEAKER IN LOCATIONS THAT
CAN STRUCTURALLY SUPPORT THE WEIGHT OF THE
SPEAKER. IGNORING THIS CAN BRING THE SPEAKER
DOWN.
•
DO NOT USE ANY OTHER METHOD THAN SPECIFIED
TO MOUNT THE SPEAKER. IF EXTREME FORCE IS
APPLIED TO THE SPEAKER, IT COULD FALL DOWN
•
ATTACH A SAFETY WIRE TO THE SPEAKER WHEN
IT IS MOUNTED HIGH UP. ONLY USE INDUSTRY-
ACCEPTED RIGGING TOOLS AND METHODS
• CAREFULLY CHECK THE UNIT’S CONDITION AFTER
UNPACKING.
PRECAUTIONS
This product contains no user serviceable parts.
Refer all servicing to qualiî ´ed service personnel. Do
not perform any servicing (unless you are qualiî ´ed
to do so.)
CAUTION - SERVICING
This produc t conforms to all the essential
requirements and further relevant speciî ´cations
described in following directives: 2011/65/EU
(RoHS2) and 1907/2006 (REACH)
EC DECLARATION OF CONFORMITY
WASTE OF ELECTRICAL AND ELECTRONIC EQUIPMENT
(WEEE)


Product specificaties

Merk: Audac
Categorie: Speaker
Model: RMA40A

Heb je hulp nodig?

Als je hulp nodig hebt met Audac RMA40A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Audac

Handleiding Speaker

Nieuwste handleidingen voor Speaker