Audac MBK260 Handleiding

Bekijk gratis de handleiding van Audac MBK260 (2 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 20 mensen en kreeg gemiddeld 4.6 sterren uit 9 reviews. Heb je een vraag over Audac MBK260 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTALLATION MANUAL

35 MM STAND ADAPTER FOR KYRA SERIES COLUMN SPEAKERS

A

D

B

C

E

EXPLODE DRAWING

Install the speaker part (‘A’ - which is standard included with the KYRA6/12 series loudspeakers) at the provided

location on the rear side of the loudspeaker.

It can be assembled on dierent heights depending on the mounting possibilities and required installation

height. Fixation is done through inserting both supplied mounting screws (‘B’) into the pre-drilled and threaded

holes at the back of the speaker. Depending on the inclination direction (upward or downwards) this part can

be assembled in two directions.

The second part (‘C’) has to be tted over a 35 mm pole tting (such as a speaker stand). Assembling is done

through insertion of two bolts and nuts (‘D’ - included with the speaker). Tighten both bolts once the required

incline angle is set and x to the pole tting by tightening the thumb screw (‘E’).

NOTE: Part ‘A’ is standard included with KYRA6 and KYRA12 series column speakers. For use with KYRA24 series loudspeakers on a 35 mm

stand, this part has to be ordered individually with part number # AU02001012X

Product specificaties