Audac CIRA530D Handleiding

Bekijk gratis de handleiding van Audac CIRA530D (2 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 5.0 sterren uit 2 reviews. Heb je een vraag over Audac CIRA530D of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTALLATION MANUAL

CIRA SERIES QUICK-FIT™ CEILING SPEAKERS WITH TWIST-FIX™ GRILL

STEP 1STEP 2

Cut a hole on the mounting location in the ceiling.

Make sure the diameter is matching the cut-out

measurement for the installing loudspeaker.

Double check if there are no cables or other

obstructions behind the mounting surface before

making the cut-out.

Connect the wires coming from the amplier to the

FastCon™ terminal block connector on the loudspeaker.

The correct power tapping is chosen by connecting the

appropriate terminals of the connector. A description

of the power tap selection is shown on the magnet

sticker on the rear side of the loudspeaker.

When using 100V speakers in low impedance mode

(8Ω), disconnect the ground wires by interrupting the

cable lugs.

Ø Diameter

STEP 3STEP 4

Make sure the mounting clamps are fully bended

inwards, allowing the speaker t through the cut-out.

Insert the speaker to the opening.

Fix the speaker in the provided opening by tightening

the screws of the mounting clamps using a screw

driver. A quarter turn will make the mounting clamps

ip-out, locking the speaker in place. Tighten the

screws for proper xation of the speaker.

STEP 5STEP 6

Attach the grill to the speaker by inserting the lips

into the provided openings on the speaker bae and

rotating it over a partial turn (15°).

The speaker is now correctly installed and ready for

use.

Product specificaties