Atlona ATAVAEX702PSKIT Handleiding

Atlona AV extender ATAVAEX702PSKIT

Lees hieronder de 📖 handleiding in het Nederlandse voor Atlona ATAVAEX702PSKIT (8 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

Installation Guide

AT-AVA-EX70-2PS-KIT

4K/UHD HDMI Over HDBaseT TX/RX Kit

AT-AVA-EX70-2PS-KIT

The Atlona AT-AVA-EX70-2PS-KIT is an HDBaseT transmitter/receiver kit in the Avance™ Series,

for video up to 4K/UHD 60Hz 4:2:0 and HDMI data rates up to 10 Gbps. The AVA-EX70-2PS-KIT

is HDCP 2.2 compliant and provides HDMI transmission up to 230 feet (70 meters) for 1080p

video, and up to 130 feet (40 meters) for 4K/UHD over CAT6a/7 cable. This extender kit features

integrated HDBaseT link status testing for quick verication of twisted pair cabling integrity, as

well as HDMI clock stretching, EDID ltering, and HDMI signal regeneration for legacy HDMI

source devices. The AVA-EX70-2PS-KIT delivers a cost-eective solution for HDMI extension,

with locally powered transmitter and receiver endpoints as well as surface mounting hardware for

discreet installation.

IMPORTANT: Visit https://atlona.com/product/AT-AVA-EX70-2PS-KIT for the latest

rmware updates and Installation Guide.

1 x AT-AVA-EX70-2PS-TX

1 x AT-AVA-EX70-2PS-RX

4 x Mounting brackets

8 x Mounting screws

2 x 5V DC power supply

2 x IEC cable

1 x Installation Guide

Package Contents

Installation Guide

AT-AVA-EX70-2PS-KIT

DC 5V HDBaseT IN HDMI OUT

AT-AVA-EX70-2PS-RX

PWR

LINKFW

HDBaseT IN

DC 5V HDBaseT OUT HDMI IN

AT-AVA-EX70-2PS-TX

PWR

LINKFWTEST

HDBaseT OUT

Panel Descriptions

HDBaseT LED Descriptions

1 TEST

Quick and easy test for category cables.

Use the button to start the test and the

LED to determine pass or fail.

2 FW

Connect a micro-USB to USB-A type

cable from this port to a computer, to

update the rmware.

3 POWER and LINK LEDs

The power LED will illuminate green when

receiving power. The link LED will glow

yellow when signal is being sent/received

between the transmitter and the receiver.

4 DC 5V

Connect the included power supply to this

port.

5 HDBaseT OUT

Connect an HDBaseT cable from this port

to the port on the receiver.HDBaseT IN

6 HDMI IN

Connect an HDMI cable from a source to

this port. e.g. HDR BluRay Player

7 FW

Not used at this time.

8 POWER and LINK LEDs

The power LED will illuminate green when

receiving power. The link LED will glow

yellow when signal is being sent/received

between the transmitter and the receiver.

9 DC 5V

Connect the included power supply to this

port.

10 HDBaseT IN

Connect an HDBaseT cable from this

port to the port on the HDBaseT OUT

transmitter.

11 HDMI OUT

Connect an HDMI cable from this port to

an HDMI display.

a Green LED

When a category cable is connected

and receiving signal this LED will be

illuminated. If no cable or signal is being

received, the LED will be o.

b Yellow LED

This LED displays the status of the

HDBaseT rmware. When the LED is

blinking slowly, the rmware is good. If

the LED is blinking rapidly or o, there

is no rmware or the rmware has been

corrupted.

b b

610 11

a a

83 721

Installation Guide

AT-AVA-EX70-2PS-KIT

The AT-AVA-EX70-2PS-KIT includes two mounting brackets and four mounting screws each,

which can be used to attach the units to any at surface.

1. Position one of the mounting brackets,

as shown below, aligning the holes on

the side of the enclosure with one set of

holes on the mounting bracket.

2. Use the enclosure screws to secure the

mounting bracket to the enclosure.

3. Repeat the above steps to attach

the second mounting bracket to the

opposite side of the unit.

Mounting Instructions

AT -AVA- EX70-2PS -RX

POWER

LINK

Included screws

4. Mount the unit using the oval-shaped holes, on each mounting bracket. If using a drywall

surface, a #6 drywall screw is recommended.

NOTE: Mounting brackets can also be inverted

to mount the unit under a table or other at

surface.

AT -AVA- EX70 -2P S-RX

POW ER

LINK

1. Connect a source to the port on the transmitter.HDMI IN

2. port on the receiver.Connect a display to the HDMI OUT

3. port on the transmitter, to the Connect an category cable, from the HDBaseT OUT

HDBaseT IN port on the receiver.

4. Connect the included 5V power supplies into the transmitter and receiver.

5. Connect power supply to an AC outlet.

Installation

Product specificaties

Merk:	Atlona
Categorie:	AV extender
Model:	ATAVAEX702PSKIT
Soort:	AV-zender & ontvanger
LED-indicatoren:	Link, Power
Ondersteund audioformaat:	DTS, LPCM, PCM
Connectiviteitstechnologie:	Bedraad
Ondersteunde video-modi:	480i, 576i, 1080i
Maximum resolutie:	4096 x 2160 Pixels
Type stroombron:	AC, DC
Ondersteunde grafische resoluties:	640 x 480 (VGA),800 x 600 (SVGA),1024 x 768 (XGA),1152 x 864 (XGA+),1280 x 800 (WXGA),1360 x 768 (WXGA),1366 х 768,1440 x 900,1600 x 1200 (UXGA),1680 x 1050 (WSXGA+),1920 x 1920,2048 x 1536 (QXGA),2560 x 1600 (WQXGA),3840 x 2160
Duurzaamheidscertificaten:	CE, Federal Communications Commission (FCC), RoHS
Kleurdiepte:	24 Bit
Modulatie:	PCM
Temperatuur bij opslag:	-20 - 60 °C
HDMI in:	1
HDCP versie:	1.4/2.2
Aantal HDMI-uitgangen:	1
Receiver afmetingen (B x D x H):	23.7 x 106.8 x 75 mm
RJ-45 invoer ports:	1
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 60 procent
Receiver gewicht:	230 g
Transmitter afmetingen (WxDxH):	31 x 50 x 80.6 mm
Transmitter gewicht:	200 g
Ondersteundende kabel types:	Cat5e, Cat6, Cat6a, Cat7