Atlona AT-VCC-RELAY-KIT Handleiding

Bekijk gratis de handleiding van Atlona AT-VCC-RELAY-KIT (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 22 mensen en kreeg gemiddeld 4.1 sterren uit 4 reviews. Heb je een vraag over Atlona AT-VCC-RELAY-KIT of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Installation Guide

AT-VCC-RELAY-KIT

1

IP to Relay Command Converter for Velocity Control System

AT-VCC-RELAY-KIT

The Atlona AT-VCC-RELAY-KIT is an accessory for the Atlona Velocity™ Control System that

provides conversion between IP control commands and relay / sensor signals. This Velocity

Control Converter is very compact and can be placed anywhere a device requires control and

is not IP-capable. The VCC-RELAY-KIT is remotely powered through Power over Ethernet (PoE),

or locally from a USB power source. The primary unit installs onto any surface via a convenient

mounting dock. A simple “click” locks it into place for a secure, reliable installation. The control

port module supports DIN rail installation, and features four relay outputs plus four sensor inputs.

The inputs and outputs are both congurable for various operating modes.

1 x AT-VCC

1 x AT-VCC-RELAY

Package Contents

Operating Notes

• The Velocity Command Converter must be on the same network as the Velocity Gateway

(AT-VGW-250) or it will be unable to sync for control.

• The AT-VCC-RELAY-KIT is PoE, to power the unit, simply plug it into a PoE compatible

network switch. If the network switch is not PoE capable, a PoE injector (purchased separately)

or USB can be used.

• All devices (AT-VCC, Velocity, AT-VTP, switchers, etc) should be set to static IPs or the

DHCP IP address reserved for each individual device.

IMPORTANT: Velocity Gateway (AT-VGW-250) must be set up before the AT-VCC-RELAY-

KIT is fully functional.

Product specificaties