Atlona AT-HDR-EX-70C-TX Handleiding
Atlona
Niet gecategoriseerd
AT-HDR-EX-70C-TX
Bekijk gratis de handleiding van Atlona AT-HDR-EX-70C-TX (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 23 mensen en kreeg gemiddeld 3.9 sterren uit 12 reviews. Heb je een vraag over Atlona AT-HDR-EX-70C-TX of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8
1
AT-HDR-EX-70C-TX
4K HDR HDBaseT Transmitter with Control
AT-HDR-EX-70C-TX
The Atlona AT-HDR-EX-70C-TX is a HDBaseT™ transmitter for 4K and high dynamic range (HDR)
content. It supports extension of 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling plus HDR
data, multi-channel audio, control signals, and power up to 130 ft (40 m) or 1080p up to 230 ft
(70 m) over Category 6/6A cable.
The HDR-EX-70C-TX is ideal for use with the AT-HDR-EX-70C-RX receiver for transmitting 4K
HDR in point-to-point applications. It can also be used with the AT-UHD-CLSO-824 and AT-
UHD-SW-5000ED for transmitting 4K/UHD @ 60 Hz 4:2:0 signals to the switchers from a remote
source.
IMPORTANT: Visit https://atlona.com/product/at-hdr-ex-70c-tx for the latest rmware
updates and Installation Guide.
1 x AT-HDR-EX-70C-TX
2 x Mounting brackets
4 x Mounting screws
1 x 48V DC power supply
1 x 2-pin captive screw connector
1 x 3-pin captive screw connector
1 x 4-pin captive screw connector
Package Contents
Installation Guide
2
AT-HDR-EX-70C-TX
DC 48V
-
+
RS-232
RX T X SS
HDBaseT OUT HDMI INIR OUTIR IN
AT-HDR-EX-70C-TX
POWER
LINKTEST UTILITY
1. LINK
2. FW
3. TEST
4. 5V LOCK
Panel Descriptions
1 TEST
Quick and easy test for cables when used
with the AT-HDR-EX-70C-RX. Use the
button to start the test and the LED to
determine pass or fail.
2 UTILITY
Connect a mini-USB to USB-A cable from
this port to a computer for updating and
testing. Rotate the dial to set the unit into
dierent modes.
3 POWER and LINK LEDs
The power LED will illuminate green when
receiving power. The link LED will glow
yellow when signal is being sent/received
between the transmitter and the receiver.
4 DC 48V
Connect the included power supply to this
port.
5 RS-232
Bidirectional control port, used for pass
through of commands to or from the
receiver.
6 IR
Connect a 3rd party controller to the IR IN
port or an IR emitter to the IR OUT port.
7 HDBaseT OUT
Connect an HDBaseT cable from this port
to the port on the receiver.HDBaseT IN
8 HDMI IN
Connect an HDMI cable from a source to
this port. e.g. HDR BluRay Player
5 6 7 84
321
Pin out will be determined by the
RS-232 cable and connect as
RX (receive), TX (transmit) and
(Ground).
A 3-pin captive screw connector for RS-232 has been included.
A 4-pin captive screw connector for IR has been included.
IR IN is connected by a ground and signal wire. Use
with 3rd party control systems.
IR OUT is connected by a ground and signal wire.
For easy termination, Atlona recommends using the 3
meter IR cable AT-IR-CS-TX.
RS-232
IR
GND RX TXGNDRX TX
IR IN IR OUT
GND SS
Installation Guide
3
AT-HDR-EX-70C-TX
The AT-HDR-EX-70C-TX includes two mounting brackets and four mounting screws each, which
can be used to attach the units to any at surface.
1. Position one of the mounting brackets,
as shown below, aligning the holes on
the side of the enclosure with one set of
holes on the mounting bracket.
2. Use the enclosure screws to secure the
mounting bracket to the enclosure.
3. Repeat the above steps to attach
the second mounting bracket to the
opposite side of the unit.
Mounting Instructions
FW
AT -HDR-EX- 70C-RX
POWER
LINK
Included screws
-
+
The power cable will be white for the
positive connection and black for the
negative connection. These should be
placed in the corresponding captive
screw ports.
A 2-pin captive screw connector for the power supply has been included.
Power
-+
+
-
Installation Guide
Product specificaties
| Merk: | Atlona |
| Categorie: | Niet gecategoriseerd |
| Model: | AT-HDR-EX-70C-TX |
Heb je hulp nodig?
Als je hulp nodig hebt met Atlona AT-HDR-EX-70C-TX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Atlona
31 Maart 2025
30 Januari 2025
13 Januari 2025
13 Januari 2025
8 Januari 2025
8 Januari 2025
8 Januari 2025
8 Januari 2025
8 Januari 2025
8 Januari 2025
Handleiding Niet gecategoriseerd
- General
- Uniprodo
- Xblitz
- Britax
- Vaillant
- Gerber
- Babysense
- (Recovery)
- Hover-1
- Ade
- Native Instruments
- Schmidt & Bender
- Alfresco
- HyperX
- Arco
Nieuwste handleidingen voor Niet gecategoriseerd
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025