Atlas Sound WMA16-23 Handleiding

Bekijk gratis de handleiding van Atlas Sound WMA16-23 (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.5 sterren uit 7 reviews. Heb je een vraag over Atlas Sound WMA16-23 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1/2

AtlasSound.com

TELEPHONE: (800) 876-3333

FAX (800) 765-3435

©2012 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS004389 RevA 5/12

1601 JACK MCKAY BLVD.

ENNIS, TEXAS 75119 U.S.A.

WMA Cabinets

Wall Mounted Cbinets Series

5

1

3

4

All fastening and anchoring

methods to be specified by site

engineers/inspectors as required.

Concrete Wall

Installation

Wood Stud

Installation

Use x 2" sleeve type

concrete anchor bolts for

concrete walls or x 2"

toggle bolts in concrete

block wallapplications.

(1 bolt required per keyhole)

Use x 2" lag bolts and washers.

(1 bolt required per keyhole)

Use #10 sheetmetal screws and washers.

(2 screws required per keyhole)

(

Steel stud installation not tested b

y

UL

)

Steel Stud

Installation

16.00"mm

All Heights

17.00"mm (WMA10)

20.00"mm (WMA12)

24.00"mm (WMA16)

Mounting Hole Locations

16.00

All Heights

20.00"mm (WMA24)

30.00"mm (WMA35)

20.00"mm (WMA24)

30.00"mm (WMA35)

"mm

12"mm

12"mm

Figure 1Figure 2

Installation Instructions

1. Anchor backbox to wall through the reinforced areas shown above

(Figure 1).

2. If the wall is uneven, shims may need to be positioned between the

backbox and the wall to get the backbox level.

3. Determine the hinge side of the center section.

4. Install the hinge pins on the top and bottom of the side you wish to

be hinged (Figure 2).

5. Open the center section and install the hair pins to prevent the hinge

pins from being removed (Figure 2).

6. Leave adequate service loops in all wiring in case future change-over

is required.

3⁄ "8

3⁄ "8

5

⁄ "16

Product specificaties