Atlantic H-PAS AT-1 Handleiding
Bekijk gratis de handleiding van Atlantic H-PAS AT-1 (12 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 5.0 sterren uit 9 reviews. Heb je een vraag over Atlantic H-PAS AT-1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/12

Instruction Manual
AT-1
High Performance Loudspeaker
with H-PAS™ Technology

2
AT-1 High Performance Loudspeaker with H-PAS™ Technology
Table of Contents
The contents of this manual are Copyright © 2010 by Atlantic Technology International,
Corp., and may not be duplicated or reproduced by any means, whether physical, electronic
or otherwise without prior written consent from Atlantic Technology International, Corp.
Atlantic Technology and the Atlantic Technology logo are registered trademarks of Atlantic
Technology International, Corp.
Specifications are those in effect at the time of printing. Atlantic Technology International,
Corp. reserves the right to change specifications or designs at any time without notice
without obligation to modify existing units.
AT-1
High Performance Loudspeaker with
H-PAS™ Technology
Thank you for choosing Atlantic Technology products. Your new speaker has
been precision-crafted to give you years of enjoyable, trouble-free service.
This manual covers the Atlantic Technology AT-1 speaker. It will show you
how to incorporate these speakers into your present setup, as well as how
to assemble a complete music or home theater system from them. The AT-1
can be used with all current and past sound formats including Stereo, all
Dolby and DTS formats, DVD-Audio and SACD Audio.
Introduction
The Model AT-1 is a 2-way system of extraordinarily high performance
intended for use in a top-quality music or home theater system. Its patent-
pending H-PAS™ bass technology enables the AT-1 to deliver powerful low
bass performance (-3 dB @ 29 Hz) not previously achievable with compa-
rably-sized drivers in similar-sized enclosures.
Each speaker contains two GLH (Graphite Loaded Homopolymer) 5 ¼"
(135mm) woofers and an advanced 11
⁄8" (28mm) ferrofluid-cooled, Low
Resonance silk dome tweeter with an integral back chamber/heatsink. The
drivers are configured in an M-T-M array (midrange-tweeter-midrange
alignment). This vertical arrangement of drivers provides wide left-to-right
coverage of sound while limiting the floor and ceiling reflections that can
color the sound. These components are mounted in an acoustically inert
MDF enclosure, with special proprietary internal bracing, called CDFF™
(Cross Design Free Flow). This bracing makes the enclosure extremely
rigid, while perfectly maintaining the internal airflow that is critical to its
performance.
IMPORTANT:
Although it may seem like asking for driving directions,
please take a few moments to read all of this booklet. It has many
helpful tips and ideas on properly setting up and using your system.
We promise that if you take the time to read and follow these tips
you’ll get better system performance and more enjoyment.
Table of Contents
2 Introduction
3 Unpacking the Speakers
3 Attaching the Feet
3 Attaching the Grilles
3 Glass Tops
t4 Placemen
4 Using the AT-1 in a 2-channel Music System
4 Using the AT-1 in a Home Theater System
6 Connecting Your Speakers
6 Conventional Connection
6 Bi-amp Connection
6 Wire Management System
7 System Wiring
8 High Frequency Energy Control
9 Caring for Your Speakers
9 Specifications
For Future Reference
Record the serial number and date of purchase for each speaker here. The serial number
is found on the speaker terminal panel on the back of the enclosure.
Serial Number
Serial Number
Date of Purchase

Instruction Manual
3
Unpacking and Assembly
Unpacking the Speakers
Use care when unpacking the speakers. Since the grilles are packed off the
speakers, be particularly careful of the driver elements as you unpack and
move the speakers. Remember to keep the original boxes and packing mate-
rial, in the unlikely event the speakers need servicing, or if you move.
Attaching the Feet
The cast aluminum feet with spikes are shipped unattached to the speaker.
We recommend you attach the feet before proceeding to any other aspect
of setup and installation.
Attach the feet to the bottom of the speaker cabinet as shown. The spikes
can be adjusted to level the speaker. Circular metal discs are provided to
protect hardwood floors.
Attaching the Grilles
The included metal grilles are held to the front of the enclosures with power-
ful neodymium magnets. There are depressions on the back of the grille that
the magnets fit into. Once the speakers are in their final position, remove
the grille from its protective plastic bag and carefully position it over the
magnets on the baffle.
Move them together slowly and when you get close enough, the magnets
will draw the grille in and hold it tight. Be careful not to get your fingers
caught between the grille and the cabinet.
Glass Tops
Decorative smoked glass tops are provided for the AT-1 to complete its
elegant appearance. Attach the four self-adhesive rubber pads to the top of
the cabinet as shown to prevent vibration and place the glass on top of the
cabinet with the bevel towards the front. (See figure 2)
Figure 2
Installing the glass top
Figure 3
AT-1 High-performance
loudspeaker
Figure 1
Attaching the feet
Screw tips into
foot. Adjust to
level speaker.
Optional tip
"toes" protect
hardwood floors.
Attach feet to
threaded inserts in
bottom of cabinet
with supplied screws.
Product specificaties
Merk: | Atlantic |
Categorie: | Speaker |
Model: | H-PAS AT-1 |
Heb je hulp nodig?
Als je hulp nodig hebt met Atlantic H-PAS AT-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Speaker Atlantic
25 April 2025
12 Mei 2023
7 Mei 2023
4 Mei 2023
15 April 2023
29 Maart 2023
24 Maart 2023
22 Maart 2023
19 Maart 2023
25 Februari 2023
Handleiding Speaker
- VIETA PRO
- Avante
- JL Audio
- JLab
- CyberData Systems
- Russound
- Stinger
- SoundTube
- Kenwood
- Alto
- Kramer
- SOUNDBOKS
- ZAPUVO
- WHD
- Mirage
Nieuwste handleidingen voor Speaker
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025