Asko W2084C.W Handleiding

Asko Wasmachine W2084C.W

Bekijk gratis de handleiding van Asko W2084C.W (64 pagina’s), behorend tot de categorie Wasmachine. Deze gids werd als nuttig beoordeeld door 92 mensen. Heb je een vraag over Asko W2084C.W of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PDF downloaden (3.2 MB)

Pagina 1/64

USER MANUAL

Washing machine

WM75.B

Carefully read the instructions for use before using the washing machine.

W2084C.W.AU

Beoordeel deze handleiding

Product specificaties

Merk:	Asko
Categorie:	Wasmachine
Model:	W2084C.W

Foutcodes Asko W2084C.W

Foutcodes uit de officiële handleiding, met betekenis en oplossing.

Code	Betekenis	Oplossing
E0	INCORRECT SETTINGS	Restart the programme. If the error reoccurs, call a service technician.
E1	THERMISTOR ERROR - Temperature sensor error.	Inlet water too cold. Repeat the washing program. If the appliance reports this error again, call a service technician.
E10	WATER LEVEL SENSOR ERROR	Turn the appliance OFF and then switch it again ON. Start the program again. If the error reoccurs, call service technician.
E11	OVERFLOW - Water overflowing.	If water in the drum exceeds a certain level and an error is reported, the washing program will be interrupted and water will be pumped out. Restart the programme. If the error reoccurs, call a service technician. If the washing machine continues to add water, close the water tap and call a service technician.
E12	MOTOR ERROR / MOTOR CONTROL ERROR	Restart the program. If the error reoccurs, call a service technician.
E2	DOOR LOCK ERROR	Turn the appliance OFF and then switch it again ON. Start the program again. If the error reoccurs, call service technician.
E23	DOOR UNLOCK ERROR - Error while unlocking the door.	Door is closed, but it cannot be unlocked. Turn off the washing machine, then turn it back on. If the error reoccurs, call a service technician. See instructions for opening the door in the manual door opening chapter.
E3	WATER FILLING ERROR	Check if the water inlet valve is open, if the filter on the water inlet hose is clean, if the water supply hose is deformed or clogged, and if the pressure in the water mains is between 0.1 and 1 MPa (1–10 bar). Then press Exit to resume. If the error reoccurs, call a service technician.
E36	COMMUNICATION UI AND PMCU - Error in UI and PMCU communication.	Turn off the appliance and turn it back on. If the error reoccurs, call a service technician.
E37	PMCU/UI software versions are not compatible.	Please call a service technician.
E6	HEATING ERROR - Water heating error.	Restart the program. If the error reoccurs, call a service technician.
E7	DRAINING ERROR - Water draining error.	Check if the pump filter is clean, if the drain hose is clogged, if the drain is clogged, and if the drain hose is fitted at the right height. Then press Exit. If the error reoccurs, call a service technician.