Argoclima Astro Handleiding

Argoclima Heater Astro

Lees hieronder de 📖 handleiding in het Nederlandse voor Argoclima Astro (4 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 78 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

V 06/10

WHITE & ORANGE

OPERATING INSTRUCTIONS

Read the instructions carefully before installing and operating the appliance or performing maintenance

operations. Observe all the safety instructions; failure to observe the instructions may cause accidents and/or

damages. Store these instructions for future reference.

FAN HEATER

V 06/10

GENERAL SAFETY INFORMATION

• Use this fan heater only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire,

electric shock or injury to persons.

• Ensure that the mains power complies with the voltage specified on the fan heater rating label (230V~/50Hz).

• Don't leave your home while the appliance is in function: ensure in this case that the switch is in OFF (0) position and the

thermostat is in minimum position.

• This product is not a toy. Children should be adequately supervised to ensure that they do not play with the appliance.

• This appliance is not suitable for use by persons (including children) with reduced physical, sensory or mental abilities, or

without the necessary experience and knowledge, unless they have been adequately supervised and instructed

concerning use of the appliance by a person responsible for their safety.

• Do not cover the appliance or restrict the air inlet and outlet grilles to prevent overheating.

• Ensure that all objects are at least 1 meter from the front, back and sides of the appliance.

• Disconnect the mains power when the appliance is not used or for cleaning operations.

• Avoid using the fan heater in dusty environments or in the presence of inflammable vapours (e.g. in workshops or

garages) or paint vapours.

• Do not use the appliance to dry clothing.

• Use the appliance in a well-ventilated area.

• Avoid placing fingers or foreign objects in the air inlet/outlet grilles, as this may lead to electric shock or fire and may

damage the appliance. To avoid the risk of fire, do not block the grilles or tamper with them in any way while the ceramic

fan heater operates.

• Do not use the appliance if the cord or plug are damaged. If the power supply cord is damaged, it must be replaced by the

manufacturer, dealer or a similarly qualified person so as to avoid any safety risks.

• Do not operate the appliance if it has fallen from a height or has suffered damage in any way. Contact qualified technical

personnel to examine the appliance or perform any electrical or mechanical repairs.

• The most common cause of overheating is the build-up of dust in the appliance. Remove dust deposits by unplugging the

appliance and cleaning the air outlets and grilles with the aid of a vacuum cleaner.

• Do not use abrasive detergents for cleaning this appliance. Clean the appliance with the aid of a dry cloth. Always remove

the plug from the mains socket before cleaning.

• To disconnect the fan heater, push the switch to O and remove the plug from the socket. Pull on the plug only. Avoid

pulling on the cord when disconnecting the fan heater.

• Do not place any objects on the cord and do not bend it.

• It is not advisable to use extension cords, as these may overheat and cause the risk of fire. Do not use a single extension

cord to operate multiple appliances.

• Do not immerse the cord, plug or any other element of the appliance in water or other liquids.

• Do not touch the plug with wet hands; don’t put wet clothes on the appliance

• Do not place the fan heater above or near another heat source.

WARNING: In order to avoid overheating, do not cover the heater. Do not hang anything on the heater

and do not cover it while it’s working. This is clearly written on the cover of the product or shown by

the symbol

• The fan heater may cause the risk of fire if, while in operation, is covered by or comes into contact with inflammable

material including curtains, drapery, blankets, etc. KEEP THE FAN HEATER AWAY FROM THESE MATERIALS.

• Do not connect the appliance to the mains power before it has been properly assembled and positioned.

• The appliance heats up slightly when in use. In order to avoid burns, do not let bare skin touch hot surfaces.

• Do not use the appliance on soft surfaces such as beds, where the grilles may be covered. Always stand the fan heater

on a flat, stable surface when in operation, in order to prevent it from overturning. Arrange the cord in such a way that the

fan heater and other objects do not rest on it. Do not run the cord under carpets. Do not cover the cord with blankets,

carpets or similar materials. Place the cord far away from busy areas, or in a place where it cannot be accidentally pulled-

out. During function the cord must be always completely pulled out.

• Use the appliance only in upright position. As the fan heater is in class 2, earth connection is not required.

• Do not operate the fan heater in close proximity to bathtubs, showers, washbasins or pools.

• Do not position the fan heater below a socket outlet.

• Do not operate the appliance outdoors.

V 06/10

WARNING: do not use the fan heater with a controller or any other device that activates the appliance

automatically, as there may be a risk of fire if the fan heater is covered or incorrectly positioned.

• Upon initial start-up, the fan heater may emit a slight, harmless smell. This smell is a normal effect of the initial heating up

of the internal heating elements, and should not recur later on.

• Do not attempt to repair, disassemble or modify the appliance: it doesn’t contain parts that can be repaired by the user.

• Turn the switch off and unplug before carrying out any maintenance work or moving the appliance. Always unplug from

the socket when the product is not in use.

WARNING: ALWAYS UNPLUG WHEN CARRYING OUT MAINTENANCE WORK OR MOVING THE FAN HEATER

• Do not place anything on the appliance; avoid placing wet garments on the convector.

• Turn the appliance off if unattended in order to avoid accidents.

• If the appliance is not used for prolonged periods, disconnect the plug, replace the convector in its box and store it in a

dry, ventilated place.

• Ensure that the air inlet /outlet are not close to walls or curtains when the appliance is in use, so as to avoid obstructing

the convector and hampering its efficiency.

• Should you hear an abnormal noise or detect an unusual smell when using the fan heater, cease use and unplug

immediately.

• Do not expose the elderly or children to a continuous flow of air.

PARTS DESCRIPTION

A. Air outlet grille

B. Air suction grille

C. Thermostat knob

Minimum “*”

Maximum “I”

D. On/off and selection knob

0 = off

u = cool air

I = hot air (1000 W )

II = very hot air (2000 W )

WARNING:

DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH AS THE SOLE MEANS OF DISCONNECTING

POWER. WHEN SERVICING OR MOVING THE HEATER, ALWAYS UNPLUG THE POWER CORD.

A B

BACK VIEW

Product specificaties

Merk:	Argoclima
Categorie:	Heater
Model:	Astro
Kleur van het product:	Oranje
Warmtebron:	Electrisch
Gewicht:	1100 g
Breedte:	222 mm
Diepte:	151 mm
Hoogte:	221 mm
Soort:	Ventilator elektrisch verwarmingstoestel
Aan/uitschakelaar:	Ja
Instelbare thermostaat:	Ja
Oververhittingsbeveiliging:	Ja
Draagbaar:	Ja
AC-ingangsspanning:	230 V
AC-ingangsfrequentie:	50 Hz
Geschikt voor ruimtevolume tot:	60 m³
Verwarmingsvermogen:	2000 W
Verwarming power (min):	1000 W
Zomer-ventilatie:	Ja