Aqara Vibration Sensor T1 Handleiding
Aqara
Smarth home
Vibration Sensor T1
Bekijk gratis de handleiding van Aqara Vibration Sensor T1 (1 pagina’s), behorend tot de categorie Smarth home. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.8 sterren uit 2.5 reviews. Heb je een vraag over Aqara Vibration Sensor T1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1
Aqara Vibration Sensor T1 User Manual
Aqara Home App
Product Introduction
The Aqara Vibration Sensor T1 is a vibration sensor with a built-in
high-precision acceleration sensor that can sense the vibration and
movement of objects. It communicates with the hub through the low-power
Zigbee communication protocol. It can trigger scenarios such as sounding a
hub’s alarm aer detecting glass break and sending an alarm message to a
connected mobile phone.
Device access
1.Please download the latest version of Aqara Home App through the App
Store or scan the QR code below.
Product Installation
Product Specifications
Warnings and safety precautions
Method 1: No sticker needed, just place it on the desired flat surface.
Product Model: VB-S01D
Product dimensions: 36 × 36 × 9 mm (1.42 × 1.42 × 0.35 in)
Battery: CR2032
Wireless protocol: Zigbee
Operating temperature: -10°C ~ 50°C (14°F ~ 122°F)
Operating humidity: 0~95% RH, non-condensing
Method 2: affix it on wall/other surface with the adhesive sticker.
2.Please make sure that the Aqara Home account you are using has been
bound to an Aqara hub device. If the hub is not bound, please refer to the
hub manual to add the hub to the app.
3.Open the app, click "+" in the upper right corner of the homepage, enter
the Add Device (Accessory) page, and select "Vibration Sensor T1 ”, Follow
the prompts; You can also scan the QR code on the device to add the device
in the Add Accessory page.
4.Change a setting on the device through the App. If the device’s status changes,
it means the device connection is normal.
* This product needs to be used with an Aqara Zigbee hub.
* This product is for indoor use only.
* To make this product compatible with Apple HomeKit, you need to use an Aqara hub. For
more details, please visit www.aqara.com.
*If device adding fails, please move the product closer to the hub. Restart the device and try
again.
* Effective distance verification: Click the Reset button once , and the hub will emit a sound,
indicating that the device and the hub can communicate effectively (only Aqara Home app
supports this function).
* For best user experience, please update the device’s firmware to the latest version before
using it aer the device is bound.
*Please make sure the surface where you are applying the sticker is clean and dry.
* To ensure stable wireless communication, please avoid installing the device on a metal surface.
* Before using the device for the first time, please remove the battery insulation film.
Reset button
Long press 5s: Resets the sensor
and allows it to pair again
Click once: Effective
communication distance
verification
Indicator light
1.This product is for indoor use only, please do not use it outdoors;
2.Be careful to prevent moisture, do not splash water or other liquids on this
product;
3.Do not place this product near heat sources;
4.Do not allow children to play with the device and keep the device away from
children;
5.This product is only used to improve the safety and convenience of your
home. If a user violates the product instructions and these precautions, the
manufacturer will not be responsible for any risks and/or property losses as
a result.
6.Please do not attempt to repair the device yourself; this work should be
performed by authorized professionals.
7.This device is not suitable for safe use in areas 2000 meters above sea level.
Service hotline: 400-990-7973 (10:00 - 18:00 on weekdays)
Service website: www.aqara.com/support
Service Email: support@aqara.com
Manufacturer: Lumi United Technology Co., Ltd.
Address: Room 801-804, Building 1, Chongwen Park, Nanshan iPark, No.
3370, Liuxian Avenue, Fuguang Community, Taoyuan Residential District,
Nanshan District, Shenzhen, China
Product specificaties
| Merk: | Aqara |
| Categorie: | Smarth home |
| Model: | Vibration Sensor T1 |
Heb je hulp nodig?
Als je hulp nodig hebt met Aqara Vibration Sensor T1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Smarth home Aqara
19 September 2025
18 September 2025
18 September 2025
14 Juli 2025
19 November 2024
8 Augustus 2024
8 Augustus 2024
8 Augustus 2024
19 Juli 2024
19 Juli 2024
Handleiding Smarth home
- Blebox
- Elro
- Airthings
- Aluratek
- Digi
- Rademacher
- Tesla
- Speed-Link
- Perel
- Abus
- Blaupunkt
- Redmond
- Vimar
- Manta
- DoorBird
Nieuwste handleidingen voor Smarth home
8 September 2025
8 September 2025
8 September 2025
2 September 2025
2 September 2025
1 September 2025
31 Augustus 2025
14 Augustus 2025
6 Augustus 2025
4 Augustus 2025