Apc Galaxy VS GVSOPT027 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Apc Galaxy VS GVSOPT027 (13 pagina's) in de categorie UPS. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/13
Installation 990-6177A-001 8/2021
Galaxy VS Mounting Skid Kit GVSOPT027
What’s in This Document
Install Mounting Skid Kit for the Galaxy VS UPS for External
Batteries .......................................................................................................1
Install Mounting Skid Kit for the Modular Battery Cabinet
GVSMODBC6 .............................................................................................8
Install Mounting Skid Kit for the Galaxy VS UPS for
External Batteries
NOTE: The IP22 kit must be installed prior to installing the UPS on the
mounting skid assembly.
1. Unpack the shipping box. The box contains the ramp (A) for wheeling the
cabinet onto the mounting skid assembly, the mounting skid parts (B), and the
mounting skid assembly (C).
Schneider Electric
35 rue Joseph Monier
92500 Rueil Malmaison -
France
+ 33 (0) 1 41 29 70 00
www.schneider-electric.com
As standards, specifications, and design
change from time to time, please ask for
confirmation of the information given in this
publication.
© 2020 – 2021 . All rightsSchneider Electric
reserved.
Galaxy VS Mounting Skid Kit GVSOPT027
Install Mounting Skid Kit for the Galaxy VS UPS for External
Batteries
2. Lift the mounting skid assembly into the final installation area using the eye
bolts. The mounting skid assembly weighs 77 kg (170 lbs), use appropriate
lifting equipment.
NOTE: Required minimum rear clearance is 75 mm (3 in) for ventilation
from rear of the mounting skid assembly to the wall.
Front View of Mounting Skid Assembly
3. Mount the mounting skid assembly to the deck using one of the following
methods:
– Weld the mounting skid assembly to the deck. Weld on the inside and
outside of the mounting skid assembly (areas marked with green).
2 990-6177A-001
Install Mounting Skid Kit for the Galaxy VS UPS for External
Batteries Galaxy VS Mounting Skid Kit GVSOPT027
– Bolt the mounting skid assembly to the deck. Use appropriate hardware for
the deck – minimum requirement is M12 strength grade 8.8 hardware. Drill
holes for the bolts in the deck according to the diagram below (in mm).
4. Place the two brackets inside the mounting skid assembly and remove the
four eye bolts.
990-6177A-001 3
Product specificaties
| Merk: | Apc |
| Categorie: | UPS |
| Model: | Galaxy VS GVSOPT027 |
Heb je hulp nodig?
Als je hulp nodig hebt met Apc Galaxy VS GVSOPT027 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding UPS Apc
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
27 Februari 2024
27 November 2023
31 Augustus 2023
Handleiding UPS
- UPS HP
- UPS AEG
- UPS Siemens
- UPS Dell
- UPS Digitus
- UPS Eaton
- UPS Emerson
- UPS Furman
- UPS Gembird
- UPS Gys
- UPS Lenovo
- UPS Riello
- UPS Schneider
- UPS Voltcraft
- UPS Jung
- UPS Steren
- UPS Tripp Lite
- UPS Approx
- UPS Block
- UPS LC-Power
- UPS Energenie
- UPS CyberPower
- UPS Adj
- UPS East
- UPS Liebert
- UPS Avocent
- UPS Minute Man
- UPS Minuteman
- UPS Maruson
- UPS Phoenix Contact
- UPS Puls Dimension
- UPS Vanson
- UPS Salicru
- UPS SurgeX
- UPS Murr Elektronik
- UPS Altronix
- UPS Ditek
- UPS Bxterra
- UPS Middle Atlantic
- UPS FSP
- UPS Atlantis Land
- UPS PowerWalker
- UPS FSP/Fortron
Nieuwste handleidingen voor UPS
17 April 2024
17 April 2024
21 Maart 2024
21 Maart 2024
21 Maart 2024
21 Maart 2024
21 Maart 2024
21 Maart 2024
21 Maart 2024
21 Maart 2024