Anthro Small Carts Handleiding

Anthro Bureau Small Carts

Lees hieronder de 📖 handleiding in het Nederlandse voor Anthro Small Carts (2 pagina's) in de categorie Bureau. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

TECHNOLOGY FURNITURE®

36" Wide AnthroCart

Assembly Instructions

01– Vertical Legs .............................. Qty. 3 ......................... 125-5020-xx

02– Insert Screws ............................ Qty. 4 .........................325-5052-00

03– 1.75" Large End Caps ............ Qty. 2......................... 175-5021-xx

04– Caster Inserts ........................... Qty. 4 ...................... 525-1000-00*

05– 2 3/8" Locking Casters ................ Qty. 2 ......................150-5003-00*

06– Base Tube Screws ..................... Qty. 3 .........................325-5000-00

07– 2 3/8" Non-Locking Casters ........ Qty. 2 ......................150-5002-00*

08– 36" Wide Base Tube ................ Qty. 1 ......................... 125-5003-xx

09– Clamp Screw ............................ Qty. 6 .........................325-5086-00

10– Shelf Support ............................ Qty. 6 ......................... 175-5060-xx

11– Shelf Clamp ............................... Qty. 6 ......................... 175-5059-xx

Enclosed Parts List

Detailed views of all Hardware

is provided with each Assembly Step.

12– 36" Wide Small Shelf ................ Qty. 1 ............................. (see below)

Small Non-recessed Shelf (GT16NRxx) ......................100-6043-xx

Small Recessed Shelf (GT16xx) ....................................... 100-6047-xx

13– 1.5" Small End Caps ............... Qty. 3 ......................... 175-5020-xx

14– 36" Wide Large Shelf ................ Qty. 1 ......................... 100-6046-xx

15– Support Screws ........................ Qty. 6 ......................... 325-5010-00

All Fastener quantities listed here are the minimum

needed for your Cart assembly. There may be a few extra

Fasteners included, which are not counted in the Parts List.

Anthro Corporation Technology Furniture® 10450 SW Manhasset Drive Tualatin, Oregon 97062

SAVE THESE INSTRUCTIONS! anthro.com

Step 7

Carefully, rotate the Shelf Assembly (from Step 5),

upside down as shown.

Place the Base Tube Assembly (from Step 6) onto the

Vertical Legs of the Shelf Assembly.

Attach the Base Tube to each Leg using a total of three

Base Tube Screws.

Tighten all Support, Caster, and Base Tube Screws.

Step 8

Rotate your Cart over onto the Casters.

Pop the 1.5" Small End Caps into the Vertical Legs and

the 1.75" Large End Caps into the Base Tube.

Congratulations! Your assembly is complete.

Please return the enclosed Registration Card to receive

our product updates, new catalogs, and sale flyers.

Thank you for choosing Anthro!

1.5" Small End Cap

1.75" Large End Cap

March 2006

These Assembly Instructions are

for the GT16xx.

Before beginning assembly of your 36"

Wide AnthroCart, please take a

moment to review the parts listed

below to verify that your shipment is

complete.

Does your Cart have 4" Casters?*

(Such as a GT16xx4. Your Caster Part

Numbers are given here.)

Does your Cart have Glides?*

(Such as a GT16xxGL. Your Glide and Glide

Insert Part Numbers are given here.)

4" Locking Caster

150-5011-00

4" Non-Locking Caster

150-5010-00

Glide Insert

525-1004-00

Glide

325-5042-00

06 07

Base Tube Screw

325-5000-00

To make the assembly of your 36"

Wide AnthroCart even easier, we have

included all of the required tools. The

handy Hex Driver Bit can be used in your

electric drill in place of the Hex Driver.

Hex Driver 5/32" ........... 375-5000-00

Hex Driver Bit 5

/32"..... 375-5003-00

Questions? 1-800-325-3841

300-5387-00

*300-5387-00*

36" Wide AnthroCart

Assembly Instructions

Anthro Corporation Technology Furniture® 10450 SW Manhasset Drive Tualatin, Oregon 97062

Step 1

Before proceeding, please review the Assembly Instructions of all Anthro Products you purchased and are

planning to include in this installation.

Decide on the shelf configuration that works best for you. Generally, customers place the large shelf at the top of the

legs and the small shelf at the bottom of the legs, and that’s how these instructions are organized. This configuration

leaves 18" clearance between the shelves.

Shelves can be installed at any height (in 1" increments), so find the best configuration for you. If you need help

configuring your cart, just give us a call!

Step 2

Attach three Shelf Supports to each Shelf. Begin by first

installing a Shelf Clamp into the Shelf notch. Be sure

the pointed barbs face towards the outer Shelf edge.

Next, slide a Shelf Support into the recesses of the

Shelf Clamp and Shelf. Push in as far as possible.

Finally, secure with a Clamp Screw.

anthro.com

Step 3

Loosely attach the Large Shelf to Hole 2 from the top

of one Vertical Leg using one Support Screw.

NOTE: This will place your Large Shelf 28" from the

floor using the standard 2 3/8" Casters.

Step 4

Loosely attach the Small Shelf to the bottom hole on

the Vertical Leg Assembly (from Step 3) using one

Support Screw.

NOTE: Handle the Shelf Assembly carefully until the

Cart if fully assembled.

Step 5

Loosely attach the 2nd and 3rd Vertical Legs to the

Shelf Assembly (from Step 4) using one Support

Screw per Shelf Support.

Questions? 1-800-325-3841

First

Finally

Support Screw

325-5010-00

Support Screw

325-5010-00

Clamp Screw

325-5086-00

Barbs

Support Screw

325-5010-00

Bottom (coped) end

Insert one Support Screw

through each Shelf Support

Step 6

Install all four Caster Inserts into the Base Tube and

secure with one Caster Screw per Insert.

Push the Casters, (locking ones in front) into the

Caster Inserts. This is a friction fit and will require

some effort. You may find it helpful to tap the bottom

of the caster with the rubber mallet provided.

Caster Screw

(small pink patch on end)

325-5052-00

GLIDES ONLY

Thread each Glide

into the Glide Inserts

Locking

Casters

Product specificaties

Merk:	Anthro
Categorie:	Bureau
Model:	Small Carts
Kleur van het product:	Zwart
Breedte:	793.75 mm
Diepte:	762 mm
Hoogte:	711.19 mm
Maximale gewichtscapaciteit:	68 kg