Angler LEDSB-1818 Handleiding

Angler Flitser LEDSB-1818

Bekijk gratis de handleiding van Angler LEDSB-1818 (8 pagina’s), behorend tot de categorie Flitser. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.3 sterren uit 3 reviews. Heb je een vraag over Angler LEDSB-1818 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/8
INSTRUCTIONS
Collapsible LED Softbox
LEDSB-1818
For 1 × 1 LED Lights
2
Overview
Corner straps
Securing straps
Adjustable corners
Recessed touch-connect strip
Carry bag
Notches
3
Attaching the Softbox
Preparing the Light Fixture
If the fixture has height adjustment knobs, raise the fixture’s height
so it sits above the bottom of the yoke.
Some 1 × 1 fixtures have two sets of side knobs for tilt and height
adjustment. Adjust the height so the tilt knobs are in the middle of
the fixture. This will make it easier to fit the softbox onto it.
Tip: Tilting the fixture upward in its yoke will make it easier to fit the
softbox onto the fixture.
Attaching the Softbox
1.
Open the adjustable corners held
together with straps and touch-
connect strips.
2.
Align the softbox with a 1 × 1 light so
the securing straps don’t interfere
with the light’s rear control panel.
Note: For Luxli’s Timpani, the securing straps should be on the
sides of the fixture, the buckles should be on the right, and the
strap that’s closest to the edge of the softbox is on top.
1


Product specificaties

Merk: Angler
Categorie: Flitser
Model: LEDSB-1818

Heb je hulp nodig?

Als je hulp nodig hebt met Angler LEDSB-1818 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden