AMX PR01-RX Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor AMX PR01-RX (43 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/43
USER MANUAL
V : 3 ERSION V1.0.
PR01- RX
Precis PR01 S caling Receiver
AV FOR AN IT WORLD®
IMPORTANT SAFETY INSTRUCTIONS
1.
READ these instructions.
2.
KEEP these instructions.
3.
HEED all warnings.
4.
FOLLOW all instructions.
5.
DO NOT use this apparatus near water.
6.
CLEAN ONLY with dry cloth.
7.
DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.
DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9.
DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for
your safety. If the provided plug does not fit into your outlet, of obsolete outlet. an consult electrician for replacement the
10.
PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11.
ONLY USE attachments/accessories specified by the manufacturer.
12.
USE ONLY with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13.
UNPLUG this apparatus during lightning storms or when unused for long periods of time.
14.
REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
15.
DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed
on the apparatus.
16.
To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.
17.
Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
18.
DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire.
The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of
electrical shock to persons.
ESD Warning: The icon to the left indicates text regarding potential danger associated with the discharge of static electricity from an
outside (such source as human hands) into an integrated circuit, often resulting in damage to the circuit.
WARNING:
To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.
WARNING:
No naked flame sources - such as candles - should be placed on the product.
WARNING:
Equipment shall be connected to a MAINS socket outlet with a protective earthing connection.
WARNING: To reduce the risk of electric shock, grounding of the center pin of this plug must be maintained.
COPYRIGHT NOTICE
AMX© 2018, all rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of AMX. Copyright protection
claimed extends to AMX hardware and software and includes all forms and matters copyrightable material and information now allowed by statutory
or judicial law or herein after granted, including without limitation, material generated from the software programs which are displayed on the screen
such as icons, screen display looks, etc. Reproduction or disassembly of embodied computer programs or algorithms is expressly prohibited.
LIABILITY NOTICE
No patent liability is assumed with respect to the use of information contained herein. While every precaution has been taken in the preparation of
this publication, AMX assumes no responsibility for error or omissions. No liability is assumed for damages resulting from the use of the
information contained herein. Further, this publication and features described herein are subject to change without notice.
AMX WARRANTY AND RETURN POLICY
The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.
User Manual - PR01-RX
3
To avoid ESD (Electrostatic Discharge) damage to sensitivecomponents, make sure you are properly grounded before
touching any internal materials.
When working with any equipment manufactured with electronic devices, proper ESD grounding procedures must be
followed to make sure people, products, and tools are as free of static charges as possible. Grounding straps, conductive
smocks, and conductive work mats are specifically designed for this purpose. These items should not manufacturedbe
locally, since they are generally composed of highly resistive conductive materials to safely drain static discharges,
with-out increasing an electrocution risk in the event of an accident.
Anyone performing field maintenance on AMX equipment should use an appropriate ESD field service kit complete with at
least a dissipative work mat with a ground cord and a UL listed adjustable wrist strap with another ground cord.
WARNING:
Do Not Open! Risk of Electrical Shock. Voltages in this equipment are
hazardous to life. No user- serviceable parts inside. Refer all servicing to
qualified service personnel.
Place the equipment near a main power supply outlet and make sure that you
can easily access the power breaker switch.
This appliance is labeled in accordance European with Directive 2012/19/EU concerning waste of electrical
and electronic equipment (WEEE). This label indicates that this product should not be disposed of with
household waste. It should be deposited at an appropriate facility to enable recovery and recycling.
ESD WARNING
WARNING:
This product is intended to be operated ONLY from the voltages listed on the back panel or the recommended, or
included, power supply of the product. Operation from other voltages other than those indicated may cause irre- versible
damage to the product and void the products warranty. The use of AC Plug Adapters is cautioned because it can allow the
product to be plugged into voltages in which the product was not designed to operate. If the product is equipped with a
detachable power cord, use only the type provided with your product or by your local distributor and/or retailer. If you are
unsure of the correct operational voltage, please contact your local distributor and/or retailer.
FCC AND CANADA EMC COMPLIANCE INFORMATION:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the into equipment an outlet a on circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Approved under the verification provision of FCC Part 15 as a Class A Digital
Device. Caution
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this
device. CAN ICES-3 (B)/NMB-3(B)
EU COMPLIANCE INFORMATION:
Eligible to bear the CE mark; Conforms to European Union Low Voltage Directive 2006/95/EC; European Union EMC
Directive 2004/108/EC; European Union Restriction of Hazardous Substances Recast (RoHS2) Directive 2011/65/EU;
European Union WEEE (recast) Directive 2012/19/EU; European Union Radio and Telecommunications Terminal Equipment
(R&TTE) Directive 1999/5/EC
WEEE NOTICE:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
C A U T I O N


Product specificaties

Merk: AMX
Categorie: Niet gecategoriseerd
Model: PR01-RX

Heb je hulp nodig?

Als je hulp nodig hebt met AMX PR01-RX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd AMX

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd