AMX NX-3200 Handleiding

AMX Controller NX-3200

Lees hieronder de 📖 handleiding in het Nederlandse voor AMX NX-3200 (48 pagina's) in de categorie Controller. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/48

Ha r d w a r e R e f e r e n c e M a n u a l

C e n t r a l Con t r o l l e r s

NX-Series

NetLinx Integrated Controllers

NX-1200, NX-2200

NX-3200, NX-4200

L a t e st R e l e a se : 5 / 0 4 / 2 0 1 5

NX-Series NetLinx Integrated Controllers Hardware Reference Guide

AMX DOMESTIC CHANNEL PARTNER and END CUSTOMER LIMITED

WARRANTY, DISCLAIMER AND LICENSE

(Excerpt from CHANNEL PARTNER TERMS AND CONDITIONS Versions 11.17.2011 with updates for previous version

8.25.2010 [sections 6.1 (a), (b) and (f)])

Definitions

“End Customer” means an authorized end customer with direct in warranty privileges from AMX. Within this limited warranty,

disclaimer and license document, “End Customer” shall have the same meaning as “Channel Partner” with the noted exceptions

of Sections 6.5 through 6.9 which are not applicable or available to End Customer’s directly from AMX. Offerings described in

Sections 6.5 through 6.9 are available to End Customer only through their selected authorized AMX Channel Partner.

6. LIMITED WARRANTY; RETURN, REPAIR AND REPLACEMENT

6.1 AMX warrants the Products to be free of material defects in materials and workmanship under normal use for three (3)

years from the Shipping Date (or such other period as may be specified below), subject to the following limitations and

exceptions (“Limited Warranty”). For any Product, “Warranty Period” means the period during which the Limited Warranty

is in effect, as set forth herein.

(a) LCD and LED panels are warranted for three (3) years from the Shipping Date, except for the display and touch

overlay components, which are warranted for a period of one (1) year from the Shipping Date.

(b) Disk drive mechanisms, pan/tilt heads and external power supplies are warranted for a period of one (1) year from the

Shipping Date.

(c) AMX lighting Products are warranted to switch on and off any load that is properly connected to our lighting Products,

as long as the AMX lighting Products are under warranty. AMX also warrants the control of dimmable loads that are

properly connected to our lighting Products. The dimming performance or quality thereof is not warranted, due to the

random combinations of dimmers, lamps and ballasts or transformers.

(d) AMX software and firmware included in the Products is warranted for a period of ninety (90) days from the Shipping

Date.

(e) Batteries and incandescent lamps are not covered under the Limited Warranty.

(f) The Warranty Period for AMX AutoPatch EPICA, Enova DGX, Modula, Modula Series 4, Modula Cat Pro Series and

8Y-3000 Product models will continue for the original installation until five (5) years after the issuance of a PDN with

respect to termination of the applicable Product model. However, if the Product is moved from its original installation

to a different installation, the Warranty Period will automatically become three (3) years from the Shipping Date and, if

more than three (3) years have elapsed since the Shipping Date, the Warranty Period will automatically expire.

DLI-6293353v1

Note: Refer to www.amx.com to view/download the latest complete AMX Warranty and Return Policies.

Notices

any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of

AMX. Copyright protection claimed extends to AMX hardware and software and includes all forms and matters copyrightable

material and information now allowed by statutory or judicial law or herein after granted, including without limitation, material

generated from the software programs which are displayed on the screen such as icons, screen display looks, etc.

Reproduction or disassembly of embodied computer programs or algorithms is expressly prohibited.

No patent liability is assumed with respect to the use of information contained herein.

Liability Notice

While every precaution has been taken in the preparation of this publication, AMX assumes no responsibility for error or

omissions. No liability is assumed for damages resulting from the use of the information contained herein.

Further, this publication and features described herein are subject to change without notice.

Lithium Batteries Notice

Switzerland requires the following notice for products equipped with lithium batteries. This notice is not applicable for all AMX

equipment.

Upon shipment of the products to Switzerland, the requirements of the most up-to-date Swiss Ordinance Annex 2.15 of SR

814.81 will be met including provision of the necessary markings, documents, and annual reports relative to the disposal of the

batteries to the Swiss Authorities.

Trademark Notices

AMX®, Enova®, AutoPatch®, NetLinx®, DXLink™, SmartScale®, and InstaGate Pro® are trademarks of AMX.

Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

3M™, Desco®, Richmond Technology®, and Plastic Systems® are registered trademarks.

Ethernet® is a registered trademark of the Xerox Corporation.

ENERGY STARR is a registered trademark of the U.S. Department of Energy and the U.S. Environmental Protection Agency

Other products mentioned herein may be the trademarks of their respective owners.

Warnings and Cautions

This manual uses the following conventions and icons to draw attention to actions or conditions that could potentially cause

problems with equipment or lead to personal risk:

ESD Warning

To avoid ESD (Electrostatic Discharge) damage to sensitive components, make sure you are properly grounded before touching

any internal materials.

When working with any equipment manufactured with electronic devices, proper ESD grounding procedures must be followed

to make sure people, products, and tools are as free of static charges as possible. Grounding straps, conductive smocks, and

conductive work mats are specifically designed for this purpose.

Anyone performing field maintenance on AMX DXLink equipment should use an appropriate ESD field service kit complete with

at least a dissipative work mat with a ground cord and a UL listed adjustable wrist strap with another ground cord. These items

should not be manufactured locally, since they are generally composed of highly resistive conductive materials to safely drain

static charges, without increasing an electrocution risk in the event of an accident. ESD protective equipment can be obtained

from 3M™, Desco®, Richmond Technology®, Plastic Systems®, and other such vendors.

ESD Warning: The icon to the left indicates text regarding potential danger associated with the discharge

of static electricity from an outside source (such as human hands) into an integrated circuit,

often resulting in damage to the circuit.

Warning: The icon to the left indicates text that warns readers against actions or conditions that

could cause potential injury to themselves.

Caution: The icon to the left indicates text that cautions readers against actions that could cause

potential injury to the product or the possibility of serious inconvenience.

Product specificaties

Merk:	AMX
Categorie:	Controller
Model:	NX-3200
Kleur van het product:	Zwart
Gewicht:	2758 g
Breedte:	431.8 mm
Diepte:	231.64 mm
Hoogte:	45.15 mm
LED-indicatoren:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Intern geheugen:	1024 MB
RS-232 port:	6
Ethernet LAN, data-overdrachtsnelheden:	10, 100 Mbit/s
Temperatuur bij opslag:	-10 - 60 °C
Flash memory:	8000 MB
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 85 procent
Besturings -en afbeeldingseenheid:	Nee