AMX MA-AGLK-07 Handleiding

AMX Niet gecategoriseerd MA-AGLK-07

Bekijk gratis de handleiding van AMX MA-AGLK-07 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 302 mensen en kreeg gemiddeld 4.6 sterren uit 151.5 reviews. Heb je een vraag over AMX MA-AGLK-07 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/2

QUICKSTARTGUIDE



MA‐AGLK‐07

AngledMountKitforModeroG5Series

Wall‐mountTouchPanels & SchedulingPanels



MA‐AGLK‐07AngleMountKits

TheMA‐AGLK‐07AngleMountKits(FIG.1)aredesignedtomountModeroG5SeriesWall

MountTouchPanelsandAMXRoomBookSchedulingPanels(7”)intostandardsizedsingle

and gangdouble boxesin Australia.theUS,EU,UKand PleasenotetheAMK2 Any MountKit

maybeshowninimages,butprocedureisthesamefortheanglemount.



FIG. 1

MA‐AGLK‐07



ModelsAvailable/Panel Compatibility

TheAngleMountKitisavailabletoaccommodate7”ModeroG5Series(wallmount,

landscape),7”Modero S Series, SeriesAMXAcendoBookandAMXRoomBook  Scheduling

TouchPanels:

MODELSAVAILABLE / PANELCOMPATIBILITY

AngleMountKitForusewith:

MA‐AGLK‐07 

(FG2265‐35)

• G5 MD‐702(FG5969‐55BL):7"Modero SeriesLandscapeWallMountTouch

Panel

• S MSD‐ ‐ 701 L2 (FG2265‐32):7"Modero SeriesLandscapeWallMountTouch

Panel

• ACB‐2107(FG4221‐07):7”AMX     Acendo Book Scheduling Touch Panel

• RMBK‐701(FG2265‐37):7”AMXRoomBookSchedulingTouchPanel



“AGLK”AngleMountKits

TheMA‐ ‐AGLK2 07AngleMountKitsareintendedforusewithModeroG5touchpanels,as

wellassecond‐generation ‐“ L2”Modero S Series(Landscape/WallMount),andAMXAcendo

Book & AMXRoomBookSchedulingtouchpanels.Theyconvenientlyplacethetouchpanel

at a 15°upwardangleforeasyrea dability,idealformountingat a lowerheighttocomply

withmanyADArequirements.

Pleasenotethese cannot be  used upside downtocreate a 15°downwardanglemount.



ProductSpecifications

PRODUCTSPECIFICATIONS

DimensionsHWD:



• ” x x x MA‐ ‐ AGLK 07: 3.97  6.74” 1.76”(100.84mm 171.20mmx44.70mm)



Weight:



• MA‐ ‐AGLK 07:0.1lbs(45.36g)



Included



Accessories:



• BackBox(5107643‐00)



• Gasket,Foam(66‐2265‐29)



• X Screw,M3.5 30mm,PFH,ClearZinc(4)(80‐1620‐04)



• X Screw,#6‐32 1.25,PFH,TypeF,ClearZinc(4)(80‐1700‐09)



Installation KitoftheAngleMount 

TheAngleMountKitsaredesignedtoutilizeexistingornewlyinstalledgangboxes,with a new

back backboxtoreplacethe boxincludedwiththetouchpanel.ToinstallanAngleMountKit

anditsaccompanyingtouchpanel:

1. Beforestartingthe theinstallation,ensurethatEthernetcablehasbeenpulledto gang

box,andthatallappropriatePowerOverEthernet(PoE)injectorshavebeenconnected

to the to the cablegoing  gangbox.

2. Ifthegangboxalreadyhasanexistingfixtureordeviceinstalledinit,removethefixture

ordevicetoexpose   the gang box (FIG.2).



3. Pull Ethernetthe cableintothegangbox,makingsurethatthemaleRJ‐45connectoris

accessiblewithinthegangbox.

4. Matchthe the the thescrewconnectorholeson gangboxwith holesin backbox(FIG.

3).

• TheAnyMountKitbackboxhasmultipleholestoallowforsingleordoublegangbox

design, designsandforstandardgangbox fromtheUS,UK,EUandAustralia.

• Examinehowthebackboxrestsonthegangbox‐lookforgapsbetweenthebackbox

andthewallsurface.



FIG. 3

TESTINGTHE THEALIGNMENTOF BACKBOX SCREW HOLES.



• Ifthegapbetweenthewallandthebackboxisexcessive,or ofiftheinstallation  the

backboxexposestoomuchofthe thegangbox,youmayapply  optionalfoamgasket

( )66‐ ‐2265 29 tothebackofthebackbox.Peeltheadhesivebackingoffth egasketand

carefullyapplyittothebackboxsurface(FIG.4).

• 

FIG. 4

APPLYINGTHE TO THEOPTIONALFOAMGASKET   BACK BOX.



5. Oncethepropermountingpositionofthebackboxisconfirmed,attachthebackboxto

thegangbox,usingeitherthescrewsusedwiththeoriginalfixtureordeviceorwiththe

includedscrewsintheAngleMountKit(FIG.5).

WARNING:Becarefulnottoover‐tightenthescrews‐thiscanbowordamagethe

backbox.

15

º

4.2”

2”

7”



FIG. 2 

Gangbox

Wallsurface

Adhesivebacking

Gasket



FIG. 5

INSTALLINGTHE TO THEBACKBOX  GANGBOX.



6. Afterinstallingthebackbox,inspectthebackbox’splacement.

Note:Ifnecessary,          the back box can be removed and the foam gasket installed.



7. PullenoughslackontheEthernetcablethroughthebackboxtoallowthecabletoreach

thetouchpanel’sRJ45connector (FIG. 6). 



FIG. 6

ACCESSINGTHE THEETHERNETCABLETHROUGH BACKBOX.



8. Removethetouchpanel’sbackboxto theaccess backofthepanel. 

9. Inserteachconnectorintoitscorrespondinglocationalongthebackofthetouchpanel.

Note:Formoreinformation connections,on pleaserefertotheInstallationHardware

ReferenceManualforthepanelbeinginstalled, fromavailable www.amx.com.



10. Testthe theincomingwiringbyattaching panelconnectionstotheirterminallocations

andapplyingpower.

Note:Verifythatthepanelisreceivingpowerandfunctioningproperlytoprevent

repetition of theinstallation.

11. Latchthepanel boxontothe thetophookson back androtateitdown(FIG.7).



FIG. 7

HOOKING OF ONTHETOP THETOUCHPANEL THEBACKBOX.



12. Pressgentlyandevenlyonthesurfaceofthetouchpaneluntilthepanellocksintoplace

(FIG.8).



FIG. 8

LOCKINGDOWNTHE BOTTOM THE THE OF TOUCH ONTOPANEL  BACKBOX.



WARNING:ifyouseeagapbetweenthepanelandthebackbox,orfeelanybindingwhile

lockingdownthepanel,stopimmediatelyand no areverifythat cablesorotheritems inthe

way.Donotforcethe thepanel position,into asthiscan cause damageto touchscreenor

thepanelelectronics.

RemovingtheTouchPanel

Inordertoaccessthe back ofthetouchpanel,  such as toinstall a USBconnectionforfirmware

upgrades,thedevicemayneedtoberemovedfromthebackbox.Toremovethetouchpanel: 

1. Fromthe thebottom,pullgentlyoutwardfrom backbox.Gentlyrockthepanel back 

andforthto thefreethebottomfrom backbox.

2. Rotateitupto therelease toplatchhooks,andcarefullypullthedevicefreefromthe

backbox. Take carenottodamageor pull theconnectionsonthebackofthedevice,

orto thepullthebackboxfrom gangbox.



AdditionalDocumentation

Thefollowing  related product documentsareavailabletoview/downloadatwww.amx.com: 

• ForinformationoninstallingModeroG5SeriesTouchPanels,refertotheInstallation

HardwareReferenceManual – ModeroG5Series.

• SpecificationdrawingsoftheMA‐AGLK‐07AngleMountKits.



©2020Harman.Allrightsreserved.Modero,ModeroG5 FOR HARMAN,Series,AMX,AV ANITWORLD, andtheirrespectivelogosareregistered

trademarksof other orHARMAN.Oracle,Javaand any  company brandnamereferencedmaybetrademarks/registeredtrademarksoftheir

respectivecompanies.



AMXdoesnotassumeresponsibilityforerrors specificationsoromissions.AMXalsoreservesthe toright alter withoutprior anynoticeat time.

