American Standard Huron 3342.001 Handleiding

Bekijk gratis de handleiding van American Standard Huron 3342.001 (2 pagina’s), behorend tot de categorie Toilet. Deze gids werd als nuttig beoordeeld door 19 mensen en kreeg gemiddeld 4.1 sterren uit 4 reviews. Heb je een vraag over American Standard Huron 3342.001 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

SAVE FOR FUTURE USE

2

1

7301743-100 Rev. B

Product names listed herein are trademarks of AS America, Inc.

© AS America, Inc. 2013

NEOPRENE

SEAL

SEALANT

INSTALL NEOPRENE OR GRAPHITE FELT SEAL*

Install seal evenly around waste flange (horn).

Apply a thin bead of sealant around base flange.

*NOTE: Wax seal not recommended for this application.

CAUTION:

NOTE:Pictures may not exactly define contour of china and components.

NOTE:For proper operation these products require a minimum of 30 psi line pressure.

HURON BOWL WITH EVERCLEAN

®

ONE PIECE TOILET

INSTALLATION INSTRUCTIONS

Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read

these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.

!

HURON 3341/3342

17-1/8" BACK SPUD

HURON 3312/3313

17-1/8" TOP SPUD

DIMENSIONS (Nominal)

NOTE: Distance from floor to closet flange centerline (rough-in) must be 4-1/4" (108 mm) with flange surface flush to

1/16" (1.6mm) max. beyond finished wall.

Models 3312.001, 3313.001, 3341.001, 3342.001

3

4

FLUSH TO

1/16" (1.6mm)

EXPOSED

CLOSET

FLANGE

CLOSET

BOLTS

6"

(152mm)

PILOT

HOLES

4-1/4"

(108mm)

Install closet bolts in flange channel, turn

90°, and slide into place 6" (152 mm)

apart and parallel to floor. (Use putty to

hold bolts in place if necessary.) Brace

under flooring as needed and drill two

mounting pilot holes as shown.

a. Close flush valve completely.

b. NOTE: If replacing valve, first shut off main water supply!

c. Remove old mounting hardware, remove toilet and plug wall waste opening to prevent escaping sewer gases.

d. Remove closet bolts from flange and clean away old wax, putty, etc. from base area.

NOTE: Mounting surface must be clean and perpendicular

to the floor before new toilet is installed!

REMOVE OLD TOILET:

INSTALL CLOSET BOLTS

FINISHED

FLOOR

FINISHED WALL

18-7/8"

(479mm)

24-7/8"

(632mm)

5-1/2"

(140mm)

1-1/2" (38mm)

SPUD CONNECTION

C/L OUTLET

4-1/4"

(108mm)

C/L OUTLET

4-1/4"

(108mm)

17-1/8"

(435mm)

6" (152mm)

DIA. HOLE

IN WALL

13-3/4"

(349mm)

8-1/2"

(216mm)

10-3/4"

(273mm)

C/L of

1/2"(13mm)

Dia. Holes

6"

(152mm)

(2) SLOTS

1" x 1/2"

(25mm x 13mm)

10-3/4"

(267mm)

PRODUCT IS FRAGILE. TWO PEOPLE ARE RECOMMENDED FOR HANDLING TO AVOID BREAKAGE AND POSSIBLE INJURY!

RECOMMENDED TOOLS AND MATERIALS

Putty Knife Regular Scdjustable Wrench Sealant Tape Measurerewdriver A

Hacksaw Wax Ring/Gasket Flexible Supply Tube Closet Bolts Carpenters Level

FINISHED

WALL

FINISHED

FLOOR

24-7/8"

(632mm)

18-7/8"

(479mm)

17-1/8"

(435mm)

13-3/4"

(349mm)

11"

(279mm)

15-1/4"

(387mm)

4-1/4"

(108mm)

8-3/8"

(213mm)

6"

(152mm)

(2) SLOTS

1" x 1/2"

(25 x 13mm)

3" (76mm)

DIA. HOLE

IN WALL

6" (152mm)

DIA. HOLE

IN WALL

C/L OF SUPPLY

5-1/2"

(140mm)

C/L OUTLET

4-1/4"

(108mm)

10-3/4"

(273mm)

C/L of

1/2"(13mm)

DIA. HOLES

Product specificaties