American Dryer ExtremeAir GXT9-M Handleiding

Bekijk gratis de handleiding van American Dryer ExtremeAir GXT9-M (2 pagina’s), behorend tot de categorie Handendroger. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 5.0 sterren uit 7 reviews. Heb je een vraag over American Dryer ExtremeAir GXT9-M of wil je andere gebruikers van dit product iets vragen? Stel een vraag

e tremeirXA ®

MFD by AMERICAN DRYER, INC.

33067 INDUSTRIAL ROAD, LIVONIA, MI 48150, U.S.A.

Telephone (734) 421-2400 • Fax (734) 421-5580

www.americandryer.com • Email: sales@americandryer.com

Revised November 2011

e tremeirX A

LIMITED WARRANTY

All parts of the

e treme irX A

models are warranted to the original consumer purchaser

to be free from defects in material and workmanship for a period of five (5) years from the

date of purchase from manufacturer. All models outside of the U.S.A., one (1) year includ-

ing sensor. We will replace FREE OF CHARGE, during the warranty period, any warranted

part which proves defective in material and/or workmanship under normal installation, use,

and service, excluding normal wear. Replacement parts can be obtained by returning the

part, TRANSPORTATION CHARGES PREPAID. You must notify factory prior to returning

part or dryer. Any damage to this dryer as a result of misuse, abuse, neglect, accident,

improper installation, unauthorized repairs, or any other use violative of instructions

furnished by us WILL VOID THIS WARRANTY. THIS LIMITED WARRANTY IS THE SOLE

WARRANTY ON OUR PRODUCTS, AND WE DISCLAIM AND EXCLUDE ANY AND ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. OUR LIABILITY

SHALL NOT EXCEED IN ANY EVENT THE REPLACEMENT OR SALE PRICE OF THE

ALLEGEDLY NONCONFORMING PRODUCT AND SHALL EXCLUDE LABOR CHARGES.

TO THE EXTENT PERMITTED BY LAW WE SHALL NOT BE LIABLE FOR ANY LOSS, COST,

EXPENSE, OR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, WHETHER

BASED UPON WARRANTY (EXPRESS OR IMPLIED), CONTRACT, NEGLIGENCE OR

STRICT LIABILITY AND ARISING IN ANY WAY IN CONNECTION WITH THE DESIGN,

MANUFACTURE, SALE, USE OR REPAIR OF THE PRODUCT.

O’ Mwner sanual

e tremeirXA ®

HandDryers

F IornstallatIon orervIcessIstance s a

Please allc

(734) 421-2400 or

Email: sales@americandryer.com

ImPortant :H M & S N. raveodelerial oeady

m #______ s #______odel erIal

OPERATION AND MAINTENANCE OF YOUR DRYER

GENERAL OPERATION

This dryer is activated by an infrared sensor. The dryer operates as long as hands are below

the nozzle. There is a maximum 35-second running time with a safety over-ride feature if hands

are not removed. Each component used in your dryer has been designed to provide years of

trouble-free service. However, if trouble should develop, it can normally be located by visual

examination. Removal or replacement of most parts is simple and can be done without special

tools.

TROUBLE-SHOOTING:

IF THE DRYER WON’T TURN ON:

Check electrical service, circuit breaker. Make sure proper voltage is being supplied to the

dryer. Check for loose or disconnected terminals to sensor. INCREASE sensitivity (FIgure 3) by

inserting a flat-blade screwdriver through the hole and into the pot to CAREFULLY turn the

adjustment pot located on the sensor CLOCKWISE . If necessary, replace sensor.1/3 turn MAX

IF DRYER WILL NOT SHUT OFF:

Make certain black foam is attached to lens and lens is clean. If damaged, replace. DECREASE

sensitivity (FIgure3) by inserting a flat-blade screwdriver through the hole and into the pot to

CAREFULLY turn the adjustment pot located on the sensor COUNTER-CLOCKWISE, 1/3 turn

MAX. If necessary, replace sensor.

GXT ONLY - IF COLD AIR IS COMING FROM THE NOZZLE:

Turn off breaker for 30 seconds to reset thermostat. If necessary, inspect heating element by

unfastening blower housing from backplate (3 screws). Remove heating element from blower

housing to inspect for damage. Replace if necessary.

IF NO AIR IS COMING FROM THE NOZZLE:

If the dryer also trips the circuit breaker, replace the motor/blower assembly by unfastening the

blower housing from the backplate (3 screws) and remove the inlet shield. Otherwise, replace

the sensor.

FOR ANY OTHER PROBLEM, CONTACT FACTORY FOR ASSISTANCE.

DISCONNECT POWER BEFORE SERVICING

DESUNA LA ELECTRICIDAD ANTES DE HACER REPARACIONES

WARNING:

CLEANING - DO NOT spray cleaning solvents through dryer vents. DO NOT use abrasive,

chlorinated, or highly alkaline cleaners. DO NOT use oil based cleaners.

SEMI-ANNUALLY remove the cover and clean all lint and dust from the mechanism, inside

of cover, and plastic window.

Clean cover with a mild soap or detergent and warm water, using a soft cloth or sponge.

Product specificaties