American DJ Flash Panel 16 Handleiding

American DJ Verlichting Flash Panel 16

Lees hieronder de 📖 handleiding in het Nederlandse voor American DJ Flash Panel 16 (8 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

User Instructions

Flash Panel 16 Introduction

11/10

Unpacking: Thank you for purchasing the Flash Panel 16 by Ameri-

can DJ . Every Flash Panel 16 has been thoroughly tested and has ®

been shipped in perfect operating condition. Carefully check the ship-

ping carton for damage that may have occurred during shipping. If the

carton appears to be damaged, carefully inspect your xture for any

damage and be sure all accessories necessary to operate the unit has

arrived intact. In the case damage has been found or parts are miss-

ing, please contact our toll free customer support number for further

instructions. Do not return this unit to your dealer without rst contact-

ing customer support.

Introduction: The Flash Panel 16 is part of American DJ’s continu-

ing pursuit for creating high quality affordable intelligent LED fixtures.

The Flash Panel 16 is a DMX intelligent LED Panel. This LED panel can

be controlled via DMX or via the optional CF card controller (Model:

FP CFC). Dynamic effects can be played on it, which makes it a great

system for DJ’s and night clubs. This unit can be used as a stand alone

or linked together.

Customer Support: American DJ provides a toll free customer sup-®

port line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.americandj.com for any comments or

suggestions. Service Hours are Monday through Friday 9:00 a.m. to

4:30 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ .®

PLEASE recycle the shipping carton when ever possible.

FLASH PANEL 16

Flash Panel 16 Safety Precautions

- www.americandj.com - Flash Panel 16 Instruction Manual Page 3

• Multi-Colors

• 22 Different Programs with Speed Adjustment

• 4 Operating Modes; Sound Active, Auto Run, Program Select, &

DMX Control.

• Built in Microphone

• Optional FP CFC Control (Not Included)

• Uses 48 DMX Channels

• Daisy Chain Units Together in DMX Mode

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required volt-

age for your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break off the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 11 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

Flash Panel 16 Warranty Registration

The Flash Panel 16 carries a 1 year (365 days) limited warranty.

Please fill out the enclosed warranty card to validate your purchase

and warranty. You may also register your product online at www.

americandj.com. All returned service items whether under warranty or

not, must be freight pre-paid and accompany a return authorization

(R.A.) number. If the unit is under warranty you must provide a copy

of your proof of purchase invoice. Please contact American DJ® cus-

tomer support for a R.A. number.

Flash Panel 16 Features

To optimize the performance of this product, please read these

operating instructions carefully to familiarize yourself with the basic

operations of this unit. These instructions contain important safety

information regarding the use and maintenance of this unit. Please

keep this manual with the unit, for future reference.

Flash Panel 16 General Instructions

P The American DJ Flash Panel 16 contains a elec-ower Supply: ®

tronic ballast, which will auto sense the voltage when it is plugged into

the power source. With the electronic ballast you do not need to worry

about wall voltage, this unit can be plugged in anywhere.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used as a form of communication between intelligent fixtures

and controllers. A DMX controller sends DMX data instructions from

the controller to the fixture. DMX data is sent as serial data that trav-

els from fixture to fixture via the DATA “IN” and DATA “OUT” XLR ter-

minals located on all DMX fixtures (most controllers only have a DATA

“OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of

different manufactures to be linked together and operate from a single

controller, as long as all xtures and the controller are DMX compli-

ant. To ensure proper DMX data transmission, when using several

DMX fixtures try to use the shortest cable path possible. The order

in which fixtures are connected in a DMX line does not influence the

DMX addressing. For example; a fixture assigned a DMX address of 1

may be placed anywhere in a DMX line, at the beginning, at the end,

or anywhere in the middle. When a fixture is assigned a DMX address

of 1, the DMX controller knows to send DATA assigned to address 1

to that unit, no matter where it is located in the DMX chain.

Dip-switches in DMX mode: This unit uses dipswitches to assign a

DMX address. Each dipswitch represents a binary value.

Dipswitch 1 address equals 1

Dipswitch 2 address equals 2

Dipswitch 3 address equals 4

Dipswitch 4 address equals 8

Dipswitch 5 address equals 16

Dipswitch 6 address equals 32

Dipswitch 7 address equals 64

Dipswitch 8 address equals 128

Dipswitch 9 address equals 256

Dipswitch 10 - Some units omit dipswitch 10. When a unit does include

dipswitch 10 it is used for special functions such as sound activation.

Each dipswitch has a preset value. A specific DMX address is set by

combining the dipswitches that sum your desired value. For example:

To achieve a DMX address of 21, combine dipswitches 1, 3, and 5.

Sense dipswitch 1 has a value of 1, dipswitch 3 has a value of 4, and

dipswitch 5 has a value of 16, the combination of the create a DMX

value of 21.

Set DMX address 21: Set DMX address 201:

Dipswitch # 1 = 1 Dipswitch # 1 = 1

Dipswitch # 3 = 4 Dipswitch # 4 = 8

Dipswitch # 5 = 16 Dipswitch # 7 = 64

= 21 Dipswitch # 8 = 128

= 201

Data Cable (DMX Cable) Requirements (For DMX Operation):

The Flash Panel 16 can be controlled via DMX-512 protocol. The Flash

Panel 16 is a 48 channel DMX unit. The DMX address is set on the back

panel of the Flash Panel 16. Your unit and your DMX controller require

a approved DMX-512 110 Ohm Data cable for

data input and data output (Figure 1). We rec-

ommend Accu-Cable DMX cables. If you are

making your own cables, be sure to use standard

110-120 Ohm shielded cable (This cable may be

purchased at almost all professional sound and

lighting stores). Your cables should be made with

a male and female XLR connector on either end

of the cable. Also remember that DMX cable must

be daisy chained and cannot be split.

©American DJ® - www.americandj.com - Flash Panel 16 Instruction Manual Page 5

Flash Panel 16 DMX Set Up

Figure 1

Notice: Be sure to follow gures two and three when making your own

cables. Do not use the ground lug on the XLR connector. Do not con-

nect the cable’s shield conductor to the ground lug or allow the shield

conductor to come in contact with the XLR’s outer casing. Grounding

the shield could cause a short circuit and erratic behavior.

DMX512 IN

3-PIN XLR

DMX +

DMX -

COMMON

DMX512 OUT

3-PIN XLR

Figure 2

Flash Panel 16 DMX Set Up

ON 1 98765432 10

1282 8 32

256651641

DMX CHANNEL

Product specificaties

Merk:	American DJ
Categorie:	Verlichting
Model:	Flash Panel 16

Heb je hulp nodig?

Als je hulp nodig hebt met American DJ Flash Panel 16 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Verlichting American DJ

American DJ SDC24 Handleiding

18 Maart 2024

American DJ UV Flood 36 Handleiding

7 Mei 2023

American DJ Freq 5 Handleiding

6 Mei 2023

American DJ S-81 LED Handleiding

20 April 2023

American DJ Pocket Pro Handleiding

17 April 2023

American DJ myDMX 3.0 Handleiding

28 Maart 2023

American DJ Eco UV Bar DMX Handleiding

27 Maart 2023

American DJ SP4LED Handleiding

13 Maart 2023

American DJ Mystic LED Handleiding

3 Maart 2023

American DJ Flat Par QWH12X Handleiding

3 Februari 2023

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Aveo Engineering Powerburst Daylite Handleiding

27 April 2024

Aveo Engineering Redbaron XP Galactica Handleiding

27 April 2024

Aveo Engineering Maxx Atlas Handleiding

27 April 2024

Aveo Engineering Ultra Embedded Handleiding

27 April 2024

GVM -PRO-SD300C Handleiding

25 April 2024

GVM -PD60B Handleiding

25 April 2024

Lucide Brackx-LED Handleiding

23 April 2024

Lucide Dica LED Handleiding

23 April 2024

Lucide Yazoo Led Handleiding

23 April 2024

Lucide Dyvor-LED Handleiding

23 April 2024