American DJ Eco UV Bar DMX Handleiding

American DJ Verlichting Eco UV Bar DMX

Lees hieronder de 📖 handleiding in het Nederlandse voor American DJ Eco UV Bar DMX (6 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

User Instructions

9/13

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all afliated companies hereby dis-

claim any and all liabilities for property, equipment, building, and

electrical damages, injuries to any persons, and direct or indi-

rect economic loss associated with the use or reliance of any

information contained within this document, and/or as a result

of the improper, unsafe, unsufcient and negligent assembly,

installation, rigging, and operation of this product.

ECO UV BAR DMX

ADJ Products, LLC - www.adj.com - Eco UV Bar DMX User Manual Page 3

Eco UV Bar DMX Warranty Registration

The Eco UV Bar DMX carries a 3 year (1095 days) limited warranty.

Please fill out the enclosed warranty card to validate your purchase

and warranty. You may also register your product online at www.

americandj.com. All returned service items whether under warranty or

not, must be freight pre-paid and accompany a return authorization

(R.A.) umber. If the unit is under warranty you must provide an copy

of your proof of purchase invoice. Please contact ADJ customer sup-

port for a R.A. number.

To optimize the performance of this product, please read these operat-

ing instructions carefully to familiarize yourself with the basic operations

of this unit. These instructions contain important safety information

regarding the use and maintenance of this unit. Please keep this manual

with the unit, for future reference.

Eco UV Bar DMX General Instructions

Eco UV Bar DMX Cleaning

Due to fog residue, smoke, and dust cleaning the internal and exter-

nal optical lenses must be carried out periodically to optimize light

output.

1. Use normal glass cleaner and a soft cloth to wipe down the

outside casing.

2. Clean the external optics with glass cleaner and a soft cloth

every 20 days.

3. Always be sure to dry all parts completely before plugging

the unit back in.

Cleaning frequency depends on the environment in which the fixture

operates (i.e. smoke, fog residue, dust, dew).

Eco UV Bar DMX Introduction

ADJ Products, LLC - www.adj.com - Eco UV Bar DMX User Manual Page 2

Unpacking: Thank you for purchasing the Eco UV Bar DMX by ADJ

Products, LLC. Every Eco UV Bar DMX has been thoroughly tested

and has been shipped in perfect operating condition. Carefully check

the shipping carton for damage that may have occurred during ship-

ping. If the carton appears to be damaged, carefully inspect your x-

ture for any damage and be sure all accessories necessary to operate

the unit has arrived intact. In the case damage has been found or parts

are missing, please contact our toll free customer support number for

further instructions. Do not return this unit to your dealer without rst

contacting customer support.

Introduction: The Eco UV Bar DMX is part of ADJ’s continuing pur-

suit for creating high quality affordable fixtures. The Eco UV Bar DMX is

now DMX controllable, it also comes with an IR Remote for easy con-

trol. This unit is great for clubs, bands, roller rinks, arenas, performance

stages, theatrical productions, and any other special effects lighting

Customer Support: ADJ Products, LLC provides a toll free cus-

tomer support line, to provide set up help and to answer any question

should you encounter problems during your set up or initial operation.

You may also visit us on the web at www.adj.com for any comments

or suggestions. Service Hours are Monday through Friday 8:00 a.m. to

4:30 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

Eco UV Bar DMX Safety Precautions

ADJ Products, LLC - www.adj.com - Eco UV Bar DMX User Manual Page 4 ADJ Products, LLC - www.adj.com - Eco UV Bar DMX User Manual Page 5

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required volt-

age for your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break off the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 3 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

Power Supply: The ADJ Eco UV Bar DMX contains a automatic volt-

age switch, which will auto sense the voltage when it is plugged into

a power source. With this switch there is no need to worry about the

correct power voltage, this unit can be plugged in anywhere.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used as a form of communication between intelligent fixtures

and controllers. A DMX controller sends DMX data instructions from

the controller to the fixture. DMX data is sent as serial data that trav-

els from fixture to fixture via the DATA “IN” and DATA “OUT” XLR ter-

minals located on all DMX fixtures (most controllers only have a DATA

“OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of

different manufactures to be linked together and operate from a single

controller, as long as all xtures and the controller are DMX compli-

ant. To ensure proper DMX data transmission, when using several

DMX fixtures try to use the shortest cable path possible. The order

in which fixtures are connected in a DMX line does not influence the

DMX addressing. For example; a fixture assigned a DMX address of 1

may be placed anywhere in a DMX line, at the beginning, at the end,

or anywhere in the middle. When a fixture is assigned a DMX address

of 1, the DMX controller knows to send DATA assigned to address 1

to that unit, no matter where it is located in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX Operation):

The Inno Color Beam Z19 can be controlled via DMX-512 protocol. The

Eco UV Bar DMX is a 3 Channel DMX unit. The DMX address is set on

the rear panel of the Eco UV Bar DMX. Your unit and your DMX control-

ler require a approved DMX-512 110 Ohm Data cable for data input

and data output (Figure 1). We recommend Accu-Cable DMX cables. If

you are making your own cables, be sure to use

standard 110-120 Ohm shielded cable (This cable

may be purchased at almost all professional

sound and lighting stores). Your cables should be

made with a male and female XLR connector on

either end of the cable. Also remember that DMX

cable must be daisy chained and cannot be split.

Figure 1

Eco UV Bar DMX DMX Set Up

Product specificaties

Merk:	American DJ
Categorie:	Verlichting
Model:	Eco UV Bar DMX

Heb je hulp nodig?

Als je hulp nodig hebt met American DJ Eco UV Bar DMX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Verlichting American DJ

American DJ SDC24 Handleiding

18 Maart 2024

American DJ UV Flood 36 Handleiding

7 Mei 2023

American DJ Freq 5 Handleiding

6 Mei 2023

American DJ S-81 LED Handleiding

20 April 2023

American DJ Pocket Pro Handleiding

17 April 2023

American DJ myDMX 3.0 Handleiding

28 Maart 2023

American DJ Eco UV Bar DMX Handleiding

27 Maart 2023

American DJ SP4LED Handleiding

13 Maart 2023

American DJ Mystic LED Handleiding

3 Maart 2023

American DJ Flat Par QWH12X Handleiding

3 Februari 2023

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Aveo Engineering Powerburst Daylite Handleiding

27 April 2024

Aveo Engineering Redbaron XP Galactica Handleiding

27 April 2024

Aveo Engineering Maxx Atlas Handleiding

27 April 2024

Aveo Engineering Ultra Embedded Handleiding

27 April 2024

GVM -PRO-SD300C Handleiding

25 April 2024

GVM -PD60B Handleiding

25 April 2024

Lucide Brackx-LED Handleiding

23 April 2024

Lucide Dica LED Handleiding

23 April 2024

Lucide Yazoo Led Handleiding

23 April 2024

Lucide Dyvor-LED Handleiding

23 April 2024