American Audio Rover 250 Handleiding
American Audio
Niet gecategoriseerd
Rover 250
Bekijk gratis de handleiding van American Audio Rover 250 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 5.0 sterren uit 1.5 reviews. Heb je een vraag over American Audio Rover 250 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
User Instructions
American DJ ®
4295 Charter Street
Los Angeles Ca. 90058
www.americandj.com
Introduction:
Thank you for purchasing the American DJ Rover 250.
™
To optimize
the performance of this product, please read these operating instruc-
tions carefully to familiarize yourself with the basic operations of this
unit. This unit utilizezes a unique barrel type mirror. The barrel mirror
will rotate back and forth to the beat of the music, shooting the col-
ored beams in serveral directions all at once. This new and improved
unit also includes a thermal shutoff that will automatically shut down
the unit if it gets too hot, and automatically restart it after it has cooled
down. It also comes with a bright 24v/250w bulb and a new high tech,
light weight case design. The unit comes with a three position mode
switch that allows the unit to operate in two different sound-active
modes or a static mode.
Customer Support:
American DJ provides a toll free customer support line, to provide set ®
up help and to answer any question should you encounter problems
during your set up or initial operation. You may also visit us on the web
at www.americandj.com for any comments or suggestions.
Service Hours are Monday through Friday 9:00 a.m. to 6:00 p.m. Pacific
Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2610
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning! To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
American DJ.
Please recycle the shipping carton when ever possible.
Rover 250™ Introduction
© ®American DJ Supply - www.americandj.com - Rover 250™ Instruction Manual Page 2
American DJ
9/04
Rover 250™ Operation
© ®American DJ Supply - www.americandj.com - Rover 250™ Instruction Manual Page 3 American DJ Supply - www.americandj.com - Rover 250™ Instruction Manual Page 4© ®
General Operation:
This fixture is designed to operate as a stand alone unit, there is no
need of a controller. It has been tested and the lamp installed at the
factory there is no assembly necessary. The Rover 250™ is ready to
be plugged in, out of the box. There is no power switch, after plug
-
ging the unit if there is no lamp output check the fuse and bulb. If
the fuse and bulb are good, please return the unit for servicing. After
plugging this fixture in, the units X-axis barrel mirror will move back
and forth. The Rover 250™ features a multi-color dichroic dish that
will also rotate. This unit can be operated in three different modes.
This fixture is designed for mobile DJ’s, clubs, bands, roller rinks and
any arena that requires a compact, light weight, easy to use fixture.
Operating Modes:
This unit comes with a 3-way multi-operating switch located on
the rear of the unit. The switch controls three (3) different operating
modes; Static, Sound Active, and Continuous Rotation. When the
switch is in the "I" position the internal dichroic dish spin continu
-
ously and the mirror will react to
sound, via its internal microphone.
When the unit is in the "0" position the internal dichroic dish is static
(does not rotate) and
the mirror will react to sound. When the switch
is in the "II" position the unit's internal dichroic color wheel and mirror
will react to sound.
Rover 250™ Warranty Registration
The Rover 250™ carries a one year (365 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) num
-
ber. The R.A. number must be clearly written on the outside of the
return package. A brief description of the problem as well as the R.A.
number must also be written down on a piece of paper and included
in the shipping container. If the unit is under warranty, you must pro
-
vide a copy of your proof of purchase invoice. You may obtain a R.A.
number by contacting customer support at (800) 322-6337.
Rover 250™ Features
• Includes Built-In Hanging Yoke
• Sound-Active
• Easy Access Lamp Replacement
• Light Weight
• Futuristic Case Design
• Three Different Operating Modes
• Low Cost LL-EHJ 24v/250w Lamp
• Thermal Shutoff (Automatically shutsdown the unit if it gets to hot,
and automatically restarts when it cools down)
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Rover 250™ General Instructions
Rover 250™ Breaker Reset
This unit is equipped with a built-in safety breaker. This breaker is
designed to close the power circuit in the event of an internal short
or power surge. This will reduce the risk of electrical shock or fire and
protect the circuitry. To reset the breaker, push the breaker button in
until you hear it “pop” back in to place. If the breaker continues to
pop, stop using the unit and contact our customer support team, the
unit may need to be returned for service.
© ®American DJ Supply - www.americandj.com - Rover 250™ Instruction Manual Page 6© ®American DJ Supply - www.americandj.com - Rover 250™ Instruction Manual Page 5
Rover 250™ Lamp Replacement
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Be sure you have connected your unit into a standard
110V wall outlet.
2. Be sure the external breaker has not popped. The breaker is locat-
ed on the rear panel.
3. Remove the lamp cover and be sure the lamp is seated
in its socket properly. Occasionally lamps become loose
during shipping be sure the lamp is push in to its socket
all the way.
Unit does not respond to sound;
1. Be sure the unit's mode switch is in the "I" position, this is
the only mode that allows the unit to operate in sound
active mode.
2. Low frequencies (bass) should cause the unit to react to
sound. Tapping on the microphone, quiet or high
pitched sounds may not activate the unit.
This fixture is fitted with halogen lamps which are
highly susceptible to damage if improperly han
-
dled. Never touch lamp with your bare fingers as
the oil from your hands will shorten lamp life. Also,
never move the fixture until the lamps have had
ample time to cool. Remember, lamps are not cov
-
ered under warranty conditions.
Rover 250™ Trouble Shooting
Caution: Always replace with the exact same type lamp, unless oth-
erwise specified by an authorized American DJ
® technician. Replace
with anything other than the specified part can damage your unit and
will void your manufactures warranty.
Warning: If after you have replaced the lamp or reset the breaker
and you continue to blow either one, STOP using the unit. Contact
customer support for further instructions, you may have to return the
unit for servicing. Continuing to use the unit may cause serious dam
-
age.
Lamp Replacement: Caution! Never open the unit when in use.
Always disconnect the main power and allow the fixture ample time
to cool before attempting to replace the lamp. Lamp replacement has
been made simple by incorporating a split dome that is retained by
thumb screws. Again, please remember to always replace with the
exact same type lamp.
1. Be sure to follow the proper procedures when handling halogen
lamps. Never touch the new lamp with your bare fingers.
2. Unscrew the two thumb screws located on the bottom front of
the unit.
3. Once the thumb screws have been removed, pull the lamp
assembly cover plate up to expose the lamp.
4. Remove and replace the lamp with an exact match.
5. Reassemble in reverse order.
Rover 250™ Cleaning
Fixture Cleaning: Due to fog residue, smoke, and dust cleaning the
internal and external optical lenses must be carried out periodically to
optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Use a brush to wipe down the fan grill.
3. Clean the external optics with glass cleaner and a soft
cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth
every 30-60 days.
5. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fix
-
ture operates (I.e. smoke, fog residue, dust, dew). In heavy club use
we recommend cleaning on a monthly basis. Periodic cleaning will
ensure longevity, and crisp output.
Product specificaties
| Merk: | American Audio |
| Categorie: | Niet gecategoriseerd |
| Model: | Rover 250 |
Heb je hulp nodig?
Als je hulp nodig hebt met American Audio Rover 250 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd American Audio
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025
Handleiding Niet gecategoriseerd
- Yuer
- Eizo
- Optimum
- InfiRay
- Advantech
- Woonexpress
- Ives
- Matrox
- OWC
- American DJ
- KRK
- Horizon
- Red Digital Cinema
- SoundPEATS
- Parallels
Nieuwste handleidingen voor Niet gecategoriseerd
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025