Aluratek AMAP01F Handleiding

Aluratek Luchtreiniger AMAP01F

Lees hieronder de 📖 handleiding in het Nederlandse voor Aluratek AMAP01F (2 pagina's) in de categorie Luchtreiniger. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Air Inlet

Sensor Air Outlet

Operation Panel

Air Quality Indicator

Filter Reminder

Air Quality

Timer Setting

Sleep

Timer Power

Speed

Open directly from the side

Speed Setting

model AMAP01F

Quick Start Guide

HEPA H13 with PM2.5 Monitor

Air Puriﬁer

Filter

Package Contents

Your order has been carefully packaged and inspected.

The following accessories should be included in your

package. Please inspect the contents of the package to

ensure that you have received all items and that nothing

has been damaged. If you discover a problem, please

Product Highlights Operation Operation

Filter Installation Purifier Instructions

Operation

Purifier Instructions

Operation

Filter maintenance WARNING!!! This equipment has been tested and

found to comply with the limits of a Class B digital

device, pursuant to part 15 of the FCC rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate

radio frequency energy and, if not installed and

used in accordance with the instruction, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment off and on,

the user is encouraged to try to correct the

interference by whatever measures may be

required to correct the interference.

Radio and TV Interference Statement Technical Support and Warranty

If you need further assistance, please contact the

Aluratek support department for troubleshooting

prior to returning this device.

E-mail: support@aluratek.com

Web: www.aluratek.com/helpdesk

Local (Irvine, CA): 714-586-8730

Toll free: 1-866-580-1978

Aluratek warrants this product against defect

in material or workmanship for 1 YEAR

from the date of purchase.

For more information, please visit:

https://aluratek.com/warranty-return-policy

You can register your product online at:

https://aluratek.com/product-registration

1. Remove the air inlet cover

2. Remove the filter

3. Remove the plastic bag from the filter and reinsert

4. Replace the air inlet cover

After the purifier is plugged in to a wall outlet, you will hear

a single beep with the display lights up for a second, then

it will go to standby mode where the display will be off with

the power button light up in red.

Air Quality indicator:

Green good means air quality

Yellow moderate means air quality

Red bad means air quality.

This purifier uses a Hepa Carbon filter. It is suggested to

be replaced every two months.

After a run time of 1500 hours, the purifier’s replacement

filter icon will light up.

• Place the filter in a ventilated place

• Do not expose to excessive sunlight

• Do not wash the filter with water

• Unplug the power plug before replacing the filter,

cleaning and maintenance

• Do not operate with the filter removed as this may cause

equipment failure

• Unplug the power cord when the purifier is idle for a long

period of time

To power on the purifier, press the power

button, the display will light up and the

purifier will enter auto mode.

When the purifier is on, you can press the

timer button to set the timer between 1-8

hours. You can verify the timer is set when

you see the timer icon lit on the display.

The timer can be cancelled by press and

hold the timer button for about 3 seconds.

You can change the speed of the fan by

pressing the fan icon to change between

auto (A), slow (1), medium (2), fast (4)

and sleep (SLE).

For Sleep mode, the fan speed will

change to slow with the display turned off

except the sleep icon. To exit sleep mode,

just touch the screen and change the fan

speed to other settings.

When the filter reminder icon is lit, please

change the filter. Once the filter is replaced,

during standby mode, press and hold the

filter button to reset the filter life counter.

To power off the purifier, press the power

button, the display will turn off and the

power button will light up in red.

Power

Timer

Speed

Sleep

Reset

Power

OFF

Product specificaties

Merk:	Aluratek
Categorie:	Luchtreiniger
Model:	AMAP01F
Kleur van het product:	Wit
Ingebouwd display:	Ja
Timer:	Ja
Gewicht:	4000 g
Breedte:	333 mm
Diepte:	175 mm
Hoogte:	430 mm
Geluidsniveau:	30 dB
Gebruikershandleiding:	Ja
Verwijderbare filter:	Ja
Aantal snelheden:	4
LED-indicatoren:	Ja
Aan/uitschakelaar:	Ja
Geschikt voor ruimtes tot:	- m²
Indicatielampje:	Ja
Vermogensverbruik (max):	- W
Luchtzuiverings snelheid:	- m³/uur
Automatische modus:	Ja
Aantal filtertrappen:	3
Functies luchtreinigers:	Ventilator
HEPA-klasse:	HEPA 13
HEPA-filter:	Ja
Voorfilter:	Ja
Garantieperiode:	1 jaar
Aanbevolen HEPA-levensduur:	4 maand(en)
Filtervervanging noodzakelijk:	Ja
Automatische snelheidsaanpassing:	Ja