Aluratek ABC53F Handleiding

Aluratek Bluetooth ontvanger ABC53F

Lees hieronder de 📖 handleiding in het Nederlandse voor Aluratek ABC53F (1 pagina's) in de categorie Bluetooth ontvanger. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

Power Button

Bluetooth Status LED

Package Contents Product Highlights Product Application

Operation Operation

WARNING!!! This equipment has been tested and found to comply with the limits of a

Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by whatever measures may be

required to correct the interference.

Radio and TV Interference Statement

Aluratek warrants this product against defect in material or workmanship for 1 YEAR

from the date of purchase.

This warranty becomes invalid if the factory-supplied serial number or "warranty void" sticker has

been removed or altered on the product.

This warranty does not cover:

A) Cosmetic damage or damage due to acts of God

B) Accident, misuse, abuse, negligence or modification of any part of the product.

C) Damage due to improper operation or maintenance, connection to improper equipment,

or attempted repair by anyone other than Aluratek.

D) Products sold AS IS or WITH FAULTS.

IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT

FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING SOFTWARE, OR

IT'S DOCUMENTATION.

Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect to it's

products, contents or use of this documentation and all accompanying software, and specifically

disclaims it's quality, performance, merchantability, or fitness for any particular purpose. Aluratek

reserves the right to revise or update it's product, software or documentation without obligation to

notify any individual or entity.

Warranty

aluratek.com

model ABC53F

Quick Start Guide

Universal Bluetooth Audio Receiver & Transmitter w/ Bluetooth 5

Technical Support

If you need further assistance, please contact the Aluratek support department for

troubleshooting prior to returning this device.

E-mail: support@aluratek.com

Web: www.aluratek.com/helpdesk

Local (Irvine, CA): 714-586-8730

Toll free: 1-866-580-1978

Control Functions

Function Operation

Power ON When OFF, press and hold the Power Button for 3 seconds until

the blue LED flashes

Pairing When powered on, press the Power Button twice to start pairing

(LED flashes red and blue for RX, LED flashes blue for TX)

Slide the Mode Switch to and from TX and RX

In RX mode, press the Power Button once to play / pause music

Power OFF

Play / Pause

Mode Switch

When ON, press and hold the Power Button for 3 seconds until

the red LED flashes

Pairing in Transmitter Mode

Please make sure the device supports A2DP profile. The pairing procedure will vary

depending on the actual device. Please refer to the user guide of your device for detail

instruction. The general pairing procedures are as follows:

1. Make sure ABC53F is turned OFF and switched to TX mode

2. Activate your device’s Bluetooth function and set your device to pairing mode

3. Press and hold the power button for 3 seconds to power on ABC53F

4. Activate ABC53F pairing mode by press the power button twice.

5. ABC53F and your Bluetooth device will pair automatically

6. After connecting successfully, the blue LED will stay on.

Note: After the initial pairing of your Bluetooth device with ABC53F. It is recommend that you power on your Bluetooth

device first before you power on ABC53F for subsequent uses for faster reconnection. If the device does not

reconnect, you may press the power button to speed up the process.

Your order has been carefully packaged and inspected. The following accessories should

be included in your package. Please inspect the contents of the package to ensure that

you have received all items and that nothing has been damaged. If you discover a problem,

please contact us immediately for assistance.

Note: Please wait 3 seconds after ABC53F is powered OFF to switch the mode. After the switch, the pairing

history of the previous devices will be cleared. You will need to re-pair your Bluetooth devices to ABC53F after

you switch between TX / RX mode.

Operation

Pair with two devices at the same time in TX mode

In TX mode, the adapter is able to pair with two Bluetooth stereo headphones / speakers

at the same time.

1. Follow the previous instructions in the “Pairing in Transmitter Mode” section to pair

ABC53F with your first device.

2. Turn off the Bluetooth function on your first device, tap the Power Button twice to pair

and connect to your second device.

3. Turn on the Bluetooth function on your first device. In approximately 30 seconds, the

second device will automatically connect.

Pairing in Receiver Mode

Please make sure the device supports A2DP profile. The pairing procedure will vary

depending on the actual device. Please refer to the user guide of your device for detail

instruction. The general pairing procedures are as follows:

1. Make sure ABC53F is turned OFF and switched to RX mode

2. Press and hold the power button for 3 seconds to power on ABC53F

3. Activate ABC53F pairing mode by press the power button twice.

4. Activate your device’s Bluetooth function and set your device to search for Bluetooth

device. Select ABC53F when it is found.

5. For transmitter with Bluetooth version 2.1, you will not need to input a code. If you

are prompted for PIN, please enter “0000”.

6. If prompted by your device to connect, please select “Yes”.

7. After connecting successfully, the blue LED will stay on.

Note: Please make sure the audio output of your device is set to Bluetooth for audio streaming.

Operation

LED Indicators

LED Indicator Status

Solid Red LED Charging

Flashing Red and Blue Pairing mode in Receiver Mode

Low battery

Successfully paired

LED Off

Solid Blue LED

Pairing mode in Transmitter Mode

Flashing Blue

(Every 2 Seconds)

Flashing Red

Power OFF / Fully charged if connected to a power source

Note: For first time use, once powered on, the adapter will automatically enter pairing mode. The LED will flash

blue and red. Please follow the instructions below on how to pair.

Charging the battery

The battery is not fully charged and it is highly recommended that you charge ABC53F

before you begin using it.

Note: Using ABC53F “out of the box” will not harm the device.

You will experience reduced battery life as the unit will not be fully charged. Connect the

larger USB end of the cable provided to your PC or USB power adapter (not included)

and the smaller Micro USB to the charging port of ABC53F. Please charge the battery for

a minimum of (2) hours. The red LED will be on while charging. When charging is

complete, the red LED will turn off.

Operation

Using ABC53F with power connected

Here are the steps to follow if you want to use ABC53F with power connected. ABC53F

will stay in standby mode as long the power is connected so your Bluetooth device can

reconnect automatically after you are within range.

1. Make sure ABC53F is turned OFF.

2. Connect the larger USB end of the cable provided to your PC / power adapter / TV’s

USB port and the smaller end to the charging port of ABC53F.

3. Follow the pairing instruction to pair your device.

Operation

APTX-HD for Bluetooth 5 setup

To enjoy APTX-HD for Bluetooth 5, please follow below steps.

To enable / disable APTX-HD:

1. Please make sure ABC53F is powered off.

2. Press and Hold the power button for 7 seconds until you see the green LED flash.

When enabled, the green LED will flash once. When disabled, it will flash twice.

3. Power on ABC53F by press and hold the power button for 3 seconds.

Note: When APTX-HD is enabled, APTX-LL will be disabled. ABC53F defaults to APTX-LL

when the connected device supports this feature.

Operation

TX / RX Mode Switch

RCA Ports

RX TX

USB Charging Cable

Registration Card

3.5mm Cable RCA-Y Cable

Digital Optical Cable

Optical (SPDIF) Ports*

Micro USB Charging Port

AUX (3.5mm) Port

*In SPDIF mode, connect devices through SPDIF IN for TX mode

and SPDIF OUT for RX mode

Bluetooth headphones, earbuds,

and speakers

Bluetooth enabled smartphones,

tablets, desktops and laptops

Stereos, speaker docks and car

stereos with an AUX IN (3.5 mm)

or RCA IN or Optical (SPDIF) IN

TVs, computers and MP3 players

with an AUX OUT (3.5 mm)

or RCA OUT or Optical (SPDIF) OUT

Use ABC53F

as a Receiver

Use ABC53F

as a Transmitter

3.5 mm

cable

RCA-Y

cable

Optical

(SPDIF)

cable

OR OR

3.5 mm

cable

RCA-Y

cable

Optical

(SPDIF)

cable

OR OR

UP TO

300’

Product specificaties

Merk:	Aluratek
Categorie:	Bluetooth ontvanger
Model:	ABC53F
Kleur van het product:	Zwart
Gewicht:	119 g
Breedte:	80 mm
Diepte:	86 mm
Hoogte:	22 mm
Stroombron:	USB/batterij
LED-indicatoren:	Ja
Bluetooth-versie:	5.0
Bluetooth-profielen:	A2DP
Meegeleverde kabels:	Audio (3.5mm), Optical, RCA, USB
Snelstartgids:	Ja
Garantiekaart:	Ja
Aansluiting voor netstroomadapter:	Ja
Audio (L,R) out:	1
Antennas quantity:	1
Aantal:	1
Mac-compatibiliteit:	Ja
Hostinterface:	3,5 mm
Meegeleverde ontvanger:	Ja
Transmissie-afstand:	100 m
Wifi:	Ja
aptX audio-decodering:	Ja
3,5 mm in:	Ja