Alto PS 4LA Handleiding

Alto Speaker PS 4LA

Lees hieronder de 📖 handleiding in het Nederlandse voor Alto PS 4LA (6 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
LTO
R
R
R
RR
www.altoproaudio.com
Version 1.2 September 2005
English
English
English
EnglishEnglish
User's Manual
PS 4L/4LA
1
SAFETY INSTRUCTIONS
1. Read Instructions
All the safety and operation instructions should be read before using the product and retain them for future reference.
2. Water & Moisture
This product should not be used near water and will be protect from atmospheric agents in fixed or temporary installations.
3. Heat
This product should be situated away from heat sources such as radiators, or other devices which produce heat.
4. Liquid Entry
Care should be taken so that liquids are not spilled into the product and that objects do not fall on.
5. Service Assistance
This product should be serviced only by qualified service personnel when :
a. Liquids has spilled or objects have fallen into this product, or
b. This product has been exposed to rain, or
c. This product does not appear to operate normally or exhibits change in performance, or been dropped or itshas
cabinet / chassis damaged.
6. Package
The package of this product has been tested, inspect the package before open, if any damage is found, notify to
your dealer.
7. Hearing
This product produce high acoustic levels may cause permanent hearing loss, (SPL in for a defined period of time).
8. Installations
This product should be installed on the floor with a specific stand, according to the max weight, or in suspension
with a five points included in the cabinet (M10 1.5PH Length 30mm).
The suspension of more speaker cabinet in a vertical array is NOT advised.
"Electric discharge"
This symbol, alert you to the presence of uninsulated dangerous voltage inside the product which constitutes aenclosure,
risk of electric shock.
"Exclamatory point"
This symbol, alert the user to the presence of important operating and maintenance instructions the owner's manualin
included to the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Disposing of this product should not be placed in municipal waste and should Separate collection.be
2
1. PS 4L PASSIVE SPEAKER CABINET QUICK START
Stereo
Power Amplifier
Speaker Cable
Tripod
Mount
Left
Main Mix
Output
Right
Main Mix
Output
Mixer
Tripod
Mount
Speaker Cable
Make all initial connections with all the equipment powered off, and ensure that all the main volume controls are turned
completely down.
1). Connect one side of the speaker cable to the output CHA/CHB or Binding Post of your stereo power amplifier and
the other side to the input socket of your speaker cabinet.
2). Complete other connections as illustrated.
3). Turn on your mixer first, then the stereo power amplifier.
4). Turn up the volume controls of your amplifier to about 70%.
5). Use PFL function to get the proper input level for the mixer, and adjust the main mix level control to manipulate
the output level.
6). After using, turn off your stereo power amplifier first, then the mixer.
-. CONNECTION PLATE
(1) INPUT
(2) THRU
(1) (2)
Receive the power coming from an external power amplifier.
(SPK +1/-1 connected; +2/-2 not connected)
Direct LINK for connect in parallel a second speaker cabinet.
(SPK +1/-1 connected; +2/-2 not connected)
Besides, the passive crossover included the electronic protection
on the driver.
INPUT THRU
LINK
SOUND REINFORCEMENT SPEAKER SYSTEM
POWER HANDLING:
AES - 200 Watt s
PEAK - 400 Watts
IMPEDANCE:
8 ohms nominal
DESIGNED AND DEVELOPMENT IN ITALY
S ERI AL
MO DE L
PS 4L
LTO
R


Product specificaties

Merk: Alto
Categorie: Speaker
Model: PS 4LA

Heb je hulp nodig?

Als je hulp nodig hebt met Alto PS 4LA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Alto

Handleiding Speaker

Nieuwste handleidingen voor Speaker