Alesis Turbo Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Alesis Turbo (13 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 76 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13
User Guide
English ( 3 – 14 )
Guía del usuario
Español ( 15 – 26 )
Guide d’utilisation
Français ( 27 – 38 )
Guida per l’uso
Italiano ( 39 – 50 )
Benutzerhandbuch
Deutsch ( 51 – 62 )
Appendix
English ( 63 )
3
User Guide ( )English
Introduction
Box Contents
Turbo Drum Module
Power Adapter
Cable Snake
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit alesis.com.
For additional product support, visit alesis.com/support.
4
Setup
Items not listed in Introduction > Box Contents are sold separately.
Connecting the Drum Module
Selecting a Kit
To select one of the module's 10 preset kits, do one of the following:
• Press the Variation button so it is lit red,
and then press the 1, 2, 3, 4, or 5 button to
select Kit , or 1, 2, 3, 4 5 respectively.
• Press the Variation button so it is lit green, and then press the 1, 2, 3, 4, or 5
button to select Kit 6, 7, 8, 9, or 10 respectively.
The Kit Number will appear in the Display. Once you have selected a kit, you can select others
by repeating one of the steps above or by using the – / + buttons.
Playing the Pads
If your electronic drum kit has velocity-sensitive pads, Turbo Drum Module will play sounds of
varying timbres depending on how hard you hit the pads. Try hitting the pads with different
amounts of force to experiment with the different sounds produced by the module!
The hi-hat sound will vary based on the position of the hi-hat controller pedal:
• Open hi-hat: With your foot off the pedal, hit the hi-hat pad.
• Closed hi-hat: With your foot pressing the pedal all the way down, hit the hi-hat
pad.
• Pedal close: Press the hi-hat pedal all the way down without hitting the hi-hat pad.
• Splash: Quickly press the hi-hat pedal all the way down, and then release it
immediately.
Learn more about using the drum module in the Operation section of this manual.
Connect the head of the included cable snake here
(multipin with two screws). Then connect the 1/4"
cables at the tail end of the cable snake to each pad
in your drum kit.
1 2 3 4 5
VARIATION
Drum Module Rear Panel


Product specificaties

Merk: Alesis
Categorie: Niet gecategoriseerd
Model: Turbo

Heb je hulp nodig?

Als je hulp nodig hebt met Alesis Turbo stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Alesis

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd