Alesis SamplePad Handleiding
Alesis
Niet gecategoriseerd
SamplePad
Bekijk gratis de handleiding van Alesis SamplePad (33 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 372 mensen en kreeg gemiddeld 5.0 sterren uit 186.5 reviews. Heb je een vraag over Alesis SamplePad of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/33
SAMPLEPAD
QUICKSTART GUIDE
ENGLISH ( 2 – 6 )
MANUAL DE INICIO RÁPIDO
ESPAÑOL ( 7 –11 )
GUIDE D'UTILISATION RAPIDE
FRANÇAIS ( 12 – 16 )
GUIDA RAPIDA
ITALIANO ( 17 – 21 )
KURZANLEITUNG
DEUTSCH ( 22 – 26 )
2
BOX CONTENTS
SamplePad
Power adapter
Quickstart Guide
Safety Instructions & Warranty Information Booklet
CONNECTION DIAGRAM
TOP PANEL FEATURES
1. PAD – Strike these single-zone pads with a drumstick.
2. VOLUME – Adjusts the volume level.
3. LCD – Displays the current parameters and other
operations.
4. VALUE +/- – Decreases or increases the value of each
parameter.
5. SELECT +/- – Moves up or down through the available
modes.
6. PAD INDICATORS – An LED in this section will
illuminate when that pad is struck.
7. SD CARD SLOT – Plays a .Wav file from the SD Card
WARNING: Put on your headphones or turn on your
speakers only AFTER turning on the SamplePad.
* Sold separately
OR
HEADPHONES*
SPEAKERS*
POWER
MODULE
MOUNT*
KICK PAD*
("TRIGGER")
FOOTSWITCH*
("SWITCH")
1
2
3
45
6
7
3
REAR PANEL FEATURES
1. DC INPUT – Connect
the included power
adapter here, then
connect the adapter to
wall power.
2. POWER SWITCH –
Turns the SamplePad
on and off.
3. MAIN OUT – Use
standard 1/4" cables to
connect this output to a speaker or amplifier system. The level of this output is controlled by the VOL knob. (For
mono sound, connect a cable only to the Left output.)
4. HEADPHONES – Connect a pair of 1/4" headphones to this input.
5. KICK PEDAL INPUT – Connect an optional footswitch here with a 1/4" mono cable to use as a bass drum
trigger while playing.
6. KICK TYPE SWITCH – Set this switch to select the type of external kick trigger (sold separately) you are using
with the unit. Select "SWITCH" if you are using a switch pedal or footswitch. Select "TRIGGER" if you are using
a velocity-sensitive pedal, pad, or acoustic drum trigger.
7. MIDI OUT – Use a standard five-pin MIDI cable to connect this output to the MIDI IN of an external MIDI
device.
LCD SCREEN
1. KIT – Displays the preset number.
2. SOUND LOCATION – Displays the sound
location; either internal or on the SD card.
3. WARNING MESSAGE – Displays a
warning message or tips.
4. SOUND NAME – Displays the name of
the selected sound from the
internal sound library or an inserted
SD card (sold separately).
5. OTHER PARAMETERS – Displays the
tuning, sensitivity, panning, reverb, level,
and MIDI note.
BASIC OPERATIONS
SELECTING THE KIT
Move the Cursor to the kit area by pressing [SELECT -]
button continuously. Press the [VALUE +] or [VALUE -]
button to scroll through the 8 kit numbers. Hold down the
[VALUE +] or [VALUE -] buttons to rapidly scroll through the
kits. The kit will automatically load when you stay on the
preset for a few seconds. Edits made to a kit will be
automatically saved.
Note: The kit setting includes each pad’s sound location,
sound name or number, level, tune, reverb, pan, MIDI note,
and sensitivity.
12
345
6
7
1 2
34
5
Product specificaties
| Merk: | Alesis |
| Categorie: | Niet gecategoriseerd |
| Model: | SamplePad |
Heb je hulp nodig?
Als je hulp nodig hebt met Alesis SamplePad stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Alesis
12 Juni 2023
25 Mei 2023
2 April 2023
31 Maart 2023
28 Maart 2023
26 Maart 2023
23 Maart 2023
20 Maart 2023
18 Maart 2023
14 Maart 2023
Handleiding Niet gecategoriseerd
- Powerblade
- ACOPower
- Qifutan
- ETC
- RGBlink
- Aukey
- Efbe-schott
- Contax
- Stenda
- Blind Spot
- Kstar
- Dyson
- Hortus
- 4moms
- Warwick
Nieuwste handleidingen voor Niet gecategoriseerd
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025