Akuvox A02 Handleiding

Akuvox Niet gecategoriseerd A02

Lees hieronder de 📖 handleiding in het Nederlandse voor Akuvox A02 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

Quick Guide

A01X/A02X

Before you begin using the device, please check the version you got and ensure

that the following items are included in the shipped box:

Unpacking

Universal Accessories:

A01/A02 x 1

M2.5X4 Screw x 4

Plastic wall anchor x 4

Rope x 1

ST4X20 screw x 4

M4X30 screw x 2

Pry tool x 1

M3X4 Set screw x 1

Allen wrench x 1 Rubber Plug(S,M,L) x 3

Silicone Foam Seal Strip x 1

RJ45 Coupler Ethernet Extension Connector x 1

RJ45 Ethernet Patch Cable x 1

Embedded Junction Box Mounting Bracket x 1

Cable Locking Plate x 1

Product Overview

Card Reader

Keypad

Card Reader

A01 A02

Quick Guide

A01X/A02X

The 86 junction box is a standard purchased item for the installation and

is not included in the packing list, please prepare it before the installation.

Installaon Warning

Step1: Bracket Installaon

Wall-mounng Installaon

Mark the positions of the four holes of

the Junction box at the hole center.

Note: The junction box shall be at least

50 mm in height.

Installaon

Drill the four marked holes using 5mm

drill bit hand drill. The drilled hole depth

should be 30m m.

Junction box installation is completed

Fix the the junction box on to the wall

using 4 ST4x20 screws, then ﬁx the

junction box component on to the

junction box using 2 M4x30 screws.

Inserting the plastic wall anchors into

the drilled holes.

Quick Guide

A01X/A02X

Cut out a square hole with the dimension

(height*width*depth = 86*86*50mm).

And lead a cable from the square hole

in to the junction box .

Note: Skip this step is the junction box

is already embedded in the wall .

Fill in the gap between the square hole

and the junction box with cement or other

non-corrosive construction adhesive.

Wait until the cement or the adhesive

become hardened before proceeding

to the next step.

Note: Skip this step is the junction box

is already embedded in the wall .

Fix the junction box component on to

the junction box using 2 M4x30 Screws.

The junction box installation is completed.

Flush Mounng Installaon

GROUND

1100 mm

86mm

86 mm

Product specificaties

Merk:	Akuvox
Categorie:	Niet gecategoriseerd
Model:	A02
Breedte:	86 mm
Diepte:	33 mm
Hoogte:	86 mm
Touchscreen:	Ja
Ethernet LAN:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Interface:	Ethernet
Ethernet LAN, data-overdrachtsnelheden:	10, 100 Mbit/s
Aantal gebruikers:	20000 gebruiker(s)
Temperatuur bij opslag:	-30 - 70 °C
Ondersteunde netwerkprotocollen:	IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP
Stroomverbruik:	600 mA
Maximum aantal deuren:	1 deur(en)
DC voltage bereik:	12 V
Bedrijfstemperatuur (T-T):	-20 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Actieve ombevoegde demontage alarm:	Ja
Evenementcapaciteit:	100000
Aantal kaarthouders:	20000