Aiwa ASB-1215WL Handleiding

Aiwa Niet gecategoriseerd ASB-1215WL

Lees hieronder de 📖 handleiding in het Nederlandse voor Aiwa ASB-1215WL (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
2.1 CH SOUNDBAR
ASB-1215WL
2.1 Soundbar
06
TECHNICAL INFORMATION
Power Output 12W*2+25W
Frequency Response 45HZ-20KHz
Input:100-240V~50-60HZ
Output: 15V/2A
50W
2 x AAA
BT4.2+EDR
750*110*54mm (Main Unit）
95*365*385mm (Subwoofer)
Power Supplier
Power Consumption
Dimensions
Battery
Bluetooth Version
Amplifier
Main Unit
Remote control
Bluetooth
2.1 Soundbar
08
Instruction Manual
Digital optical/HDMI
audio output
DVD, Bluray player with
digital optical and HDMI
output
TV with digital optical or HDMI
output
Mains power connection
DO NOT power on the mains until
all other connections are made
3.5mm audio socket
(such as earphone)
MP3 player, Smart phone or
other audio equipment
TV with analogue
earphone output
CONNECTIONSCONNECTIONS 2.1 Soundbar
07
CONNECTING THE SOUNDBAR TO THE TV
1. Power connection: First connect the DC output of the power adaptor to the
soundbar, then plug into a suitable AC socket. Do not power on the mains until
all the other connections have been made.
2. Connect the Subwoofer out to the speaker inputs on the rear of the subwoofer,
ensuring correct polarities.
3. Connection to TV: If your TV has an OPTICAL or HDMI port with ARC, use an
OPTICAL or HDMI cable to connect to the respective port on the soundbar.
OR
If your TV does not have OPTICAL or HDMI (ARC), use a 3.5mm AUX cable to
connect the Auxiliary output or the headphone jack on the TV to the AUX IN port
on the soundbar.
CONNECTING THE SOUNDBAR TO OTHER DEVICES
1. OPTICAL input or HDMI (ARC) on the soundbar to OPTICAL output or HDMI
(ARC) of other devices (Blue-ray/ DVD player/ gaming consoles).
2. Other audio sources are Bluetooth, USB and AUX IN.
OPERATING INSTRUCTIONS
Turning on:
Turn on at the mains outlet; then press the POWER Button on the front of the
soundbar, or the POWER Button on the remote control.
To turn off, first press the POWER Button to set the unit to standby mode; then
turn off at the mains outlet.
Bluetooth mode:
1.Press the M Button on the unit or Button on the remote control until Bluetooth
Mode is selected.
2.On your Bluetooth-enabled device, choose ‘Aiwa ASB-1215WL’ the name of
the soundbar and connect. Once paired, you can play music from your
Bluetooth-enabled device on the soundbar.
USB mode:
1.Connect a USB memory device to the USB port.
2.Press the M Button on the unit or Button on the remote control until USB
mode is selected. Now you can play music from the USB device on the soundbar.
Note: Only mp3, WMA files can be played. Maximum size of device that can
be connected is 32GB.
AUX/OPTICAL/HDMI(ARC):
1.Connect the device using any of these modes.
2.Press the M Button on the unit or Button on the remote control repeatedly to
select the correct mode to play music from the connected device on the soundbar.
Output to
subwoofer
SAFETY INFORMATION
Important!
Please read the instructions carefully before installation and use.
Only use the power supply that is provided with the unit. Using an
unauthorised power supply will invalidate your guarantee and may
irrecoverably damage the product.
Disconnect your soundbar from the mains power supply during
thunderstorms.
If the soundbar will not be used for a long period of time, make sure
that the mains power is unplugged and the battery is removed from
the remote control battery compartment.
The supply terminals are not to be short-circuited.
Never throw batteries in a fire or attempt to open the outer casing.
Batteries are harmful if swallowed, so keep away from young children.
CAUTION: Danger of explosion if batteries are incorrectly replaced.
Replace only with the same or equivalent type.
Do not leave the unit in low temperatures as moisture can form inside
the product, which may damage the circuit board.
Do not leave the unit in high temperatures as the electronic devices
and plastic parts may warp in the heat.
Keep the unit away from bright sunlight or heat sources, such as a
radiator.
Power Source
Moisture and Water
Heat Sources and Flames
2.1 Soundbar
01
No naked flame sources, such as lit candles, should be placed on
the product.
Do not block or cover slots, holes or openings by placing the unit on
soft furnishings such as carpets, rugs or beds as these are provided
for functionality and/or ventilation to ensure safe operation.
Keep the product and all its parts out of reach of small children.
This product is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they are supervised or given
instruction concerning the use of the appliance by a person
responsible for their safety.
Do not attempt to open the product. This product does not contain
any user serviceable parts. Unauthorised handling of the device
may damage it and will void your warranty.
Do not use your soundbar near emergency/intensive care medical
equipment or during an electrical storm.
Ventilation
General Safety Information
SAFETY INFORMATION2.1 Soundbar
02
MAIN UNIT
Press and hold: Power on/Standby
Switch between different modes (BT/USB/AUX/OPTICAL/HDMI-ARC)
Press and release: Play/Pause
Press and hold: Unpair a BT device
Press and hold: Volume down
Press and release: Skip backward
Press and hold: Volume up
Press and release: Skip forward
Mode LED indicator
HDMI-ARC
Optical
Aux In socket
USB
Output to Subwoofer
1.
2.
3.
4.
5.
6.
7.
8.
DC socket
9.
Please note: If no source is played, the unit will enter Standby
mode automatically after about 20 minutes.
⑦
â‘©
9
2.1 Soundbar
03
2.1 Soundbar
04
SUBWOOFER 2.1 Soundbar
05
REMOTE CONTROL
Inverter tube
Subwoofer speaker inputs
10.
11.
12.
13.
14
â‘ 
②④③
â‘¥
⑤
11
12
13 14
Note: Ensure correct polarities when connecting the Subwoofer
speaker inputs from the Soundba
This product is intended for indoor, household use only.
Do not immerse in water or other liquids; do not use in the immediate
vicinity of water such as bathtubs, washbowls, swimming pools etc.
Power on/Standby
Switch between different modes(BT/USB/AUX in/Optical/HDMI-ARC)
Skip backward
Play/Pause
Skip forward
Unpair a Bluetooth device
Change the EQ setting
Mute/Unmute the sound
Volume down
Volume up
Install the remote batteries
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
11
â‘  â‘¡
â‘¢
â‘£
⑤
⑥⑦
⑧
⑨ ⑩

Product specificaties

Merk: Aiwa
Categorie: Niet gecategoriseerd
Model: ASB-1215WL

Heb je hulp nodig?

Als je hulp nodig hebt met Aiwa ASB-1215WL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Aiwa

Aiwa

Aiwa AMP09 Handleiding

7 Juni 2023
Aiwa

Aiwa PA-100 Handleiding

27 Mei 2023
Aiwa

Aiwa AWA400S Handleiding

6 Mei 2023
Aiwa

Aiwa AWA650US Handleiding

5 Mei 2023
Aiwa

Aiwa BR412BK Handleiding

1 Mei 2023
Aiwa

Aiwa ASB-1215WL Handleiding

8 April 2023
Aiwa

Aiwa ABT-500 Handleiding

4 April 2023
Aiwa

Aiwa AW-LED50X8FL Handleiding

31 Maart 2023
Aiwa

Aiwa ONE Handleiding

20 Maart 2023
Aiwa

Aiwa ASP-0750 Handleiding

17 Maart 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024
Sony

Sony PDW-U4 Handleiding

26 April 2024
Sony

Sony NXL-FR318 Handleiding

26 April 2024