Advantech WISE-4210 Handleiding
Advantech
Niet gecategoriseerd
WISE-4210
Bekijk gratis de handleiding van Advantech WISE-4210 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.9 sterren uit 3 reviews. Heb je een vraag over Advantech WISE-4210 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
WISE-4210 Startup Manual 1
Thank you for purchasing the WISE-4210 module. This
quick start guide is intended to help you deploy your new
module. The guide contains basic information on the power
and application wiring.
Should you require additional instructions, please refer to
the user manual.
The WISE-4210 is designed for a standard industrial
unregulated 24 V
DC
power supply. For some applications,
it can also accept +10 to +50 V
DC
power input with 200 mV
peak-to-peak power ripple. The immediate ripple voltage
should be between +10 and +50 V
DC
. Batteries may also be
used as an alternative power source.
• 1 x WISE-4210 module
• 1 x Mounting bracket
• 1 x Quick start manual
• 1 x China RoHS declaration (UA series only)
• 1 x Antenna (UA series only)*
*For NA series, antennas should be ordered respectively
per required frequency range.
** WISE-S200 I/O module should be ordered respectively.
WISE-4210
Industrial LPWAN SUB-G Wireless I/O Module
Startup Manual
Open the rubber cover on the side of WISE-4210 nodes,
there is a battery switch to turn on or turn off the battery
power supply.
The module accepts 3 x AA, 3.6 V lithium battery. The bat-
teries should be installed facing the same direction.
Battery
Overview
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
For technical support and service:
https://www.advantech.com/support/
This startup manual is for WISE-4210.
Part No. 2003421052
Printed in Taiwan
Edition 3
October 2019
Input Power Requirements
Packaging List
Power Supply Wiring
2 WISE-4210 Startup Manual
WISE-S214 (4AI/4DI)
Digital Input- Dry Contact
Analog Input
WISE-S250 (6DI/2DO/1RS-485)
Digital Input-Dry Contact
Digital Output
RS-485 Port
WISE-S251 (6DI/1RS-485)
Digital Input – Dry Contact
RS-485 Port
Normal
Mode
Mode
Light Press
(0.5 Sec)
Long Press
(2 Secs)
Power Sav-
ing Mode
LED turn
on→Get
battery
level→LED
turn off*
Leave normal
mode
Non-power
saving Mode
Getbattery
level→LED
turn off*
Leave normal
mode
S i t e -
Survey
Mode
Light Press
(0.5 Sec)
Long Press
(2 Secs)
Tx site survey packet Leave site survey mode
OTA
Mode
Status
Light Press
(0.5 Sec)
Long Press
(2 Secs)
Rx Status
Read battery
level
Leave OTA
mode
Tx Status
(by USB port)
Tx
Conguration
Tx Firmware
Low Battery NA
Leave OTA
mode
Update FW
fail
Reset OTA
mode
NA
*LED indicators will go off automatically 15 secs later when
using battery power.
Application Wiring
Membrane Button
WISE-4210 Startup Manual 3
Notes
1. Please install the CP210x USB to UART Controller driver: https://www.silabs.com/products/development-tools/software/
usb-to-uart-bridge-vcp-drivers.
2. ThepowerfromUSBisnotsufcienttopowerWISE-4210module.PleasepluginaDCpowersourcefrom+Vsand-Vs
pin.
Quick Start
1. Plug in a DC power source to the +Vs and -Vs pins of your module or insert charged batteries.
2. Connect the module to your computer via the micro-USB port.
3. Open WISE Studio and press Go To Conguration
4. Click ConnecttolinkWISE-4210-thewebcongurationpagewillappear.
5. UsethewebcongurationinWISEUtilityorpress toopenthewebcongurationpageinanybrowserOpen In Browser
(GoogleChromeisrecommended).
6. Click Informationtocheckthestatusofthemoduleortocongurethemodule.
Product specificaties
| Merk: | Advantech |
| Categorie: | Niet gecategoriseerd |
| Model: | WISE-4210 |
Heb je hulp nodig?
Als je hulp nodig hebt met Advantech WISE-4210 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Advantech
5 Augustus 2025
5 Augustus 2025
5 Augustus 2025
5 Augustus 2025
5 Augustus 2025
5 Augustus 2025
5 Augustus 2025
5 Augustus 2025
5 Augustus 2025
5 Augustus 2025
Handleiding Niet gecategoriseerd
- Fixpoint
- SunBriteTV
- Vestfrost
- Dantherm
- Baracuda
- AcuRite
- Sirus
- Hasselblad
- Light4Me
- Dnt
- Outdoorchef
- Vivanco
- Lauten Audio
- Linear
- Ooni
Nieuwste handleidingen voor Niet gecategoriseerd
5 Augustus 2025
5 Augustus 2025
5 Augustus 2025
5 Augustus 2025
5 Augustus 2025
5 Augustus 2025
5 Augustus 2025
5 Augustus 2025
Thames & Kosmos Gecko Run: Marble Run Starter Set Handleiding
5 Augustus 2025
5 Augustus 2025