Advantech MOS-2110Z-1201E Handleiding

Bekijk gratis de handleiding van Advantech MOS-2110Z-1201E (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 69 mensen en kreeg gemiddeld 4.2 sterren uit 2 reviews. Heb je een vraag over Advantech MOS-2110Z-1201E of wil je andere gebruikers van dit product iets vragen? Stel een vraag

MOS-2110Z-1201E USB iDoor module, 2-Ch, PCIe I/F

User Manual

MOS-2110Z- provides a simple method of adapting two USB 2.0 devices to a modern PCIe x 1 port. accomplish by 1201EIt

incorporating the industry standard PCIe bridge chip. It is compliant with USB 2.0 specicationwith xHCI (eXtensible Host ,

Controller Interface) specications rev. 0.96.

MOS-2110Z- supports simultaneous operation of multiple USB 2.0 and USB 1.1 devices, it can expands two external 1201E

USB 2.0 Hi-Speed ports on the systemEach USB port supplies maximum +5V/ 500mA power output to USB device . .

Besides, MOS-2110Z-1201E support h-swapping feature allows to connect/ disconnect devices without powering down ot

the system

MOS--1201E 2110Z

USB controller miniPCIe card x1

USB wire cable with I/O bracket x1

Startup Manual x 1

Note: If any of these items are missing or damaged, please contact your distributor or sales representative immediately.

You should nd the following items inside the shipping package:

USB controller miniPCIe card x1

USB wire cable with I/O bracket p1-x1

Startup Manual x 1

The MOS-2110Z- card harbors certain electronic components vulnerable to electrostatic discharge (ESD). ESD 1201E

could easily damage the integrated circuits and certain components if preventive measures are not carefully paid attention

to.

Before removing the card from the antistatic plastic bag, you should take following precautions to ward o possible ESD

damage:

Touch the metal part of your computer chassis with your hand to discharge static electricity accumulated on your

body. Or one can also use a grounding strap.

Touch the anti-static bag to a metal part of your computer chassis before opening the bag.

Take hold of the card only by the metal bracket when removing it out of the bag.

After taking out the card, rst you should:

Inspect the card for any possible signs of external damage (loose or damaged components, etc.). If the card is visibly

damaged, please notify our service department or our local sales representative immediately. Avoid installing a damaged

card into your system.

2.Initial Inspection

1.Packing List

MOS-2110Z-1201E User Manual 1

Product specificaties