Advantech IPC-6608 Handleiding


Bekijk gratis de handleiding van Advantech IPC-6608 (22 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 1.5 reviews. Heb je een vraag over Advantech IPC-6608 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/22
User Manual
IPC-6608
8-Slot Desktop / Wallmount
Chassis with PS/2 and
Redundant Power Supply Option
IPC-6608 User Manual ii
Copyright
The documentation and the software included with this product are copyright © 2009
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
notice. No part of this manual may be reproduced, copied, translated or transmitted
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
IPC-6608, PCE-7B08, PCE-5B07, PCE-5B08, PCE-6108E, PCA-6108P6,
PCA-6108P4, PCA-6108 are all trademarks of Advantech Co., Ltd.
Part No. 2002660801 Edition 2
Printed in China August 2009
Note! The information in this document is provided for reference only. Advan-
tech does not assume any liability arising out of the application or use of
the information or products described herein. This manual is subject to
change without notice.
iii IPC-6608 User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
5. Keep this equipment away from humidity.
it fall may cause damage.
temperature under 0
° ° ° C (32 F) or above 40 C (104° F), it may damage the
equipment.
8. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
9. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
10. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
11. All cautions and warnings on the equipment should be noted.
12. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
13. Never pour any liquid into an opening. This may cause fire or electrical shock.
14. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
15. If one of the following situations arises, get the equipment checked by service
personnel:
! The power cord or plug is damaged.
! Liquid has penetrated into the equipment.
! The equipment has been exposed to moisture.
! The equipment does not work well, or you cannot get it to work according to
the user's manual.
! The equipment has been dropped and damaged.
! The equipment has obvious signs of breakage.
cuit. There is a danger of explosion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended by the manufacture. Discard
used batteries according to the manufacturer’s instructions.
17. THE COMPUTER IS PROVIDED WITH CD DRIVES COMPLY WITH APPRO-
PRIATE SAFETY STANDARDS INCLUDING IEC 60825.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT


Product specificaties

Merk: Advantech
Categorie: Niet gecategoriseerd
Model: IPC-6608

Heb je hulp nodig?

Als je hulp nodig hebt met Advantech IPC-6608 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden