AdvanSea WIND Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor AdvanSea WIND (221 pagina's) in de categorie Diversen. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/221
Installation and Operation Manual S400 series 1 - 1 -
C.56 / T.56 / T.50
USER MANUAL
WIND/WIND-a S400
User manual
Manuel utilisateur
Other languages available on the CD-Rom or at :
Autres langues disponibles sur CD-Rom ou sur:
www.advansea.com
Installation and Operation Manual S400 series 2 - 2 -
S400 advanSea instruments comply with regulations in force.
Important
It is the owner’s sole responsibility to ensure that this appliance is installed and used
in such a way that will not cause any accidents, personal injury or property damage.
The user of this appliance is solely responsible for observing safe boating practices.
Installation: if not installed correctly, the appliance will not operate to the best of its
ability. In the event of doubt, please contact your advanSea retailer. Ensure that all
holes made to mount the appliance are drilled in places without risk and that they
do not weaken the structure of the boat. If in doubt, contact a qualified boat
builder.
PLASTIMO SHALL NOT BE HELD LIABLE IN THE EVENT THE USE OF THIS
APPLIANCE CAUSES ACCIDENTS, DAMAGE OR INFRINGEMENT OF THE LAW.
Reference language: this statement, instruction and user manuals and other
information documents regarding the appliance, hereinafter referred to as
"documentation", may be translated into other languages. In the event of a dispute
regarding interpretation of the documentation, the French version shall be binding.
This manual presents the procedures for installing and operating the appliance at
the date of printing. AdvanSea reserves the right to modify the technical
characteristics of the appliance without notice.
Copyright © 2009 Plastimo, France, all rights reserved. AdvanSeaTMTM is a
registered trademark of Plastimo.
Warning
Installation and Operation Manual S400 series 3 - 3 -
1 Introduction
1.1. General presentation ................................................... p.5
1.2. Components supplied with your WIND/WIND-a S400 .... p.6
1.3. Technical characteristics .............................................. p.6
2. General operation
2.1. Powering on ............................................................... p.8
2.2. Operation in normal mode ........................................... p.8
2.2.1. Selecting the type of wind
2.2.2. Selecting information
2.2.3. Resetting the max. wind speed to zero
2.2.4. Measurement units
2.2.5. Countdown timer
2.3. Alarms ........................................................................ p.10
2.3.1.Setting the apparent high speed threshold
2.3.2. Setting the battery alarm threshold
2.4. Configuration .............................................................. p.11
2.4.1. Filtering
2.4.2. Calibrating the apparent wind speed (slope)
2.4.3. Calibrating the apparent wind angle (offset)
2.4.4. Selecting the pointer
2.4.5. Simulation mode
2.4.6. Key beeps
2.4.7. Resetting data in the memory
2.5. Standby ...................................................................... p.14
2.6. Network operation (Bus AS-1) ...................................... p.14
2.6.1. Displaying multiple data
2.6.2. Remote access
2.7. Messages ................................................................... p.15
Table of contents


Product specificaties

Merk: AdvanSea
Categorie: Diversen
Model: WIND

Heb je hulp nodig?

Als je hulp nodig hebt met AdvanSea WIND stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Diversen AdvanSea

Handleiding Diversen

Nieuwste handleidingen voor Diversen