Acer Predator CG48 Handleiding

Bekijk gratis de handleiding van Acer Predator CG48 (2 pagina’s), behorend tot de categorie Monitor. Deze gids werd als nuttig beoordeeld door 60 mensen en kreeg gemiddeld 4.2 sterren uit 4 reviews. Heb je een vraag over Acer Predator CG48 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

English

Acer OLED Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the OLED monitor screen:

• Turn off the OLED monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the OLED monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.

3. Do not apply pressure to the OLED screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of

any nature.

5. Store the OLED monitor in a room with a temperature of -20° to 60° C (-4° to 140° F). Storing the OLED monitor

outside this range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the OLED monitor or the monitor is exposed to rain.

• The OLED monitor or case is damaged.

7. In order to prevent damage to the OLED panel, do not place the monitor face down on a surface.

Installing the Monitor Base

1. Place the monitor on a table, with screen facing down.

2. Align and install the monitor bases into the mounting slots on the bottom of the monitor.

3. Secure the monitor bases with the four screws.

4. Lift the monitor to an upright positon and place it on a table.

5. Remove the plastic bag around the monitor.

Connecting your monitor to a computer

1. Turn off your computer and unplug your computer’s power cord.

DP

USB Type A

USB

USB Type C

（ ）2.1

Google

TV rubber

HDMI 1

HDMI 2

HDMI 3

HDMI 3

(2.1)

DP

（ ）

2.0

（ ）

2.0

（ ）

2.0

（ ）

2.0

2. Connect the signal cable to the DP (optional) and/or HDMI

(optional) input socket of the monitor, and the DP (optional) and/

or HDMI (optional) output socket of the graphics card on the

computer.

3. Connect the USB Cable (Optional)

Connect the USB 3.0 cable to port.

4. Connect the Type C Cable (Optional)

Connect the Type C Cable to port for fast charge

5. Insert the monitor power cable into the power port at the back of

the monitor.

6. Plug the power cords of your computer and your monitor into a nearby electrical outlet.

Note: Audio output is only for audio output model. Please check user manual for more instruction.

FreeSync Premium (HDMI2.1/DP/Type-C)

It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content

frameratesforpowerefcient,virtuallystutterfreeandlow-latencydisplayupdate.

Note:

• DP: 3840x2160 supports up to 138Hz in overclocking mode, FreeSync Premium and HDR10 function.

• Type-C: 3840x2160 supports up to 138Hz in overclocking mode, FreeSync Premium and HDR10 function.

• HDMI(2.0): 3840x2160 supports to 60Hz.

• HDMI(2.1): 3840x2160 supports up to 138Hz in overclocking mode, FreeSync Premium and HDR10 function.

External controls

1

2

3

4

5

Product specificaties