A-solar AM-106 Sun Traveler Handleiding

A-solar Telefoon oplader AM-106 Sun Traveler

Lees hieronder de 📖 handleiding in het Nederlandse voor A-solar AM-106 Sun Traveler (2 pagina's) in de categorie Telefoon oplader. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

AM-106

Never out of power

Charge your mobile life in style mobile phone

game console

mp3 /ipod

navigation



1. Keep it away from re, water and moist places in order to avoid explosion, leakage

and moisture.

2. Any severe shock to the solar charger is forbidden.

3. No one except professional technicians is permitted to disassemble the solar

charger without our permission in order to avoid damaging the charger.

4. Before you use this charger, please choose correct voltage. If you can not know the

charger’s voltage of your device, you must choose voltage from 5.5V to 9.5V to

portect your device.



 



• Please ensure the rst charge is given by the USB cable.

• Please make sure you have removed the protective lm from the solat cells as

this will radically reduce the effectiviness of the cells.

• Please ensure A-solar charger is given exposure to sunny conditions for between

5 to 10 hours.

• Ensure the A-solar charger is outside, facing south, in an unshaded position.

 



• There is no indication A-solar charger gives when the battery hub is fully charged

from the solar cells. However, this is not strictly necessary because A-solar

charger will deliver power whatever state of charge is in its battery hub except if

the hub is completely empty.



• After 1 day in full sun (9am to 6pm) the A-solar chargers hub will be pretty much

fully charged. When connected to your device it will deliver power for 20 minutes

to 1 hour depending in the device.

• Please do not charge the A-solar charger behind a window but outside. Because

UV lters in windows will naturally reduce the mount of irradiation needed to

enable solar panels to operate effectively.

• Cloudy conditions, A-solar charger may take approximately 1 1/2 times longer

to charge than the above mentioned times, but this is depending on the time of

year, desity of cloud, etc.



• No. If A-solar charger hub is empty you will not be able to simultaneously charge

and deliver power. The reason is that A-solar chargers delivers power to a device

approximately 10 times quicker than its solar cells can charge up its hub.



• No we do not recommend getting the A-solar charger wet, however, should this

happen accidentially, please dry both hub and cells in a dry airy position away from

children and food stuffs. The solar cells should be ne; however, the hub/battery

may be unsalvageable. A trial will soon tell, however, we would recommend this

trial be done outside by the solar cells only and NOT the USB charge cable.





• Yes the A-solar charger should be able to charge it.



• A-solar charger has a voltage range of 3V to 5.5V, so any device that needs a higher

voltage such as a laptop or video camera is outside the range of A-solar charger.



1. Keep it away from re, water and moist places in order to avoid explosion, leakage

and moisture.

2. Any severe shock to the solar charger is forbidden.

3. No one except professional technicians is permitted to disassemble the solar

charger without our permission in order to avoid damaging the charger.

4. Before you use this charger, please choose correct voltage. If you can not know the

charger’s voltage of your device, you must choose voltage from 5.5V to 9.5V to

portect your device.



• Please ensure the rst charge is given by the USB cable.

• Please make sure you have removed the protective lm from the solat cells as

this will radically reduce the effectiviness of the cells.

• Please ensure A-solar charger is given exposure to sunny conditions for between

5 to 10 hours.

• Ensure the A-solar charger is outside, facing south, in an unshaded position.



• There is no indication A-solar charger gives when the battery hub is fully charged

from the solar cells. However, this is not strictly necessary because A-solar

charger will deliver power whatever state of charge is in its battery hub except if

the hub is completely empty.



• After 1 day in full sun (9am to 6pm) the A-solar chargers hub will be pretty much

fully charged. When connected to your device it will deliver power for 20 minutes

to 1 hour depending in the device.

• Please do not charge the A-solar charger behind a window but outside. Because

UV lters in windows will naturally reduce the mount of irradiation needed to

enable solar panels to operate effectively.

• Cloudy conditions, A-solar charger may take approximately 1 1/2 times longer

to charge than the above mentioned times, but this is depending on the time of

year, desity of cloud, etc.

• No. If A-solar charger hub is empty you will not be able to simultaneously charge

and deliver power. The reason is that A-solar chargers delivers power to a device

approximately 10 times quicker than its solar cells can charge up its hub.



• No we do not recommend getting the A-solar charger wet, however, should this

happen accidentially, please dry both hub and cells in a dry airy position away from

children and food stuffs. The solar cells should be ne; however, the hub/battery

may be unsalvageable. A trial will soon tell, however, we would recommend this

trial be done outside by the solar cells only and NOT the USB charge cable.



• Yes the A-solar charger should be able to charge it.



• A-solar charger has a voltage range of 3V to 5.5V, so any device that needs a higher

voltage such as a laptop or video camera is outside the range of A-solar charger.



1. Keep it away from re, water and moist places in order to avoid explosion, leakage

and moisture. Never put the charger at the outdoor environment unattended.

2. Any severe shock to the solar charger is forbidden.

3. No one except professional technicians is permitted to disassemble the solar

charger without our permission in order to avoid damaging the charger.

4. Before you use this charger, please choose correct voltage. If you can not know the

charger’s voltage of your device, you must choose voltage from 5.5V to 9.5V to

portect your device.



• Please ensure the rst charge is given by the USB cable.

• Please make sure you have removed the protective lm from the solat cells as

this will radically reduce the effectiviness of the cells.

• Please ensure A-solar charger is given exposure to sunny conditions for between

5 to 10 hours.

• Ensure the A-solar charger is outside, facing south, in an unshaded position.



• There is no indication A-solar charger gives when the battery hub is fully charged

from the solar cells. However, this is not strictly necessary because A-solar

charger will deliver power whatever state of charge is in its battery hub except if

the hub is completely empty.



• After 1 day in full sun (9am to 6pm) the A-solar chargers hub will be pretty much

fully charged. When connected to your device it will deliver power for 20 minutes

to 1 hour depending in the device.

• Please do not charge the A-solar charger behind a window but outside. Because

UV lters in windows will naturally reduce the mount of irradiation needed to

enable solar panels to operate effectively.

• Cloudy conditions, A-solar charger may take approximately 1 1/2 times longer

to charge than the above mentioned times, but this is depending on the time of

year, desity of cloud, etc.

• No. If A-solar charger hub is empty you will not be able to simultaneously charge

and deliver power. The reason is that A-solar chargers delivers power to a device

approximately 10 times quicker than its solar cells can charge up its hub.



• No we do not recommend getting the A-solar charger wet, however, should this

happen accidentially, please dry both hub and cells in a dry airy position away from

children and food stuffs. The solar cells should be ne; however, the hub/battery

may be unsalvageable. A trial will soon tell, however, we would recommend this

trial be done outside by the solar cells only and NOT the USB charge cable.



• Yes the A-solar charger should be able to charge it.



• A-solar charger has a voltage range of 3V to 5.5V, so any device that needs a higher

voltage such as a laptop or video camera is outside the range of A-solar charger.



1. Keep it away from re, water and moist places in order to avoid explosion, leakage

and moisture.

2. Any severe shock to the solar charger is forbidden.

3. No one except professional technicians is permitted to disassemble the solar

charger without our permission in order to avoid damaging the charger.

4. Before you use this charger, please choose correct voltage. If you can not know the

charger’s voltage of your device, you must choose voltage from 5.5V to 9.5V to

portect your device.



• Please ensure the rst charge is given by the USB cable.

• Please make sure you have removed the protective lm from the solat cells as

this will radically reduce the effectiviness of the cells.

• Please ensure A-solar charger is given exposure to sunny conditions for between

5 to 10 hours.

• Ensure the A-solar charger is outside, facing south, in an unshaded position.



• There is no indication A-solar charger gives when the battery hub is fully charged

from the solar cells. However, this is not strictly necessary because A-solar

charger will deliver power whatever state of charge is in its battery hub except if

the hub is completely empty.



• After 1 day in full sun (9am to 6pm) the A-solar chargers hub will be pretty much

fully charged. When connected to your device it will deliver power for 20 minutes

to 1 hour depending in the device.

• Please do not charge the A-solar charger behind a window but outside. Because

UV lters in windows will naturally reduce the mount of irradiation needed to

enable solar panels to operate effectively.

• Cloudy conditions, A-solar charger may take approximately 1 1/2 times longer

to charge than the above mentioned times, but this is depending on the time of

year, desity of cloud, etc.

• No. If A-solar charger hub is empty you will not be able to simultaneously charge

and deliver power. The reason is that A-solar chargers delivers power to a device

approximately 10 times quicker than its solar cells can charge up its hub.



• No we do not recommend getting the A-solar charger wet, however, should this

happen accidentially, please dry both hub and cells in a dry airy position away from

children and food stuffs. The solar cells should be ne; however, the hub/battery

may be unsalvageable. A trial will soon tell, however, we would recommend this

trial be done outside by the solar cells only and NOT the USB charge cable.



• Yes the A-solar charger should be able to charge it.



• A-solar charger has a voltage range of 3V to 5.5V, so any device that needs a higher

voltage such as a laptop or video camera is outside the range of A-solar charger.

power everywhere



 

This is the process to charge the solar panel. First,

open the two wings and keep the solar panel side

facing in the sunlight. The display will show out

“Solar Charge OK”. It means the Li-ion battery is

being charged. When the battery is fully charged,

the display will stop automatically. If the panel is not

face to the sunlight, the display will be powered off,

the solar panel will stop working.

 

This is the process to charge the battery inside.

Plug the charging cable into the small

USB socket of the charger and connect into the

laptop or PC USB socket.

 Plug the build in USB into the laptop

or PC USB socket. The display will show out

“SystemChecking” and the information of the power

remain in the charger. Please pull out the plug when

display show out the “Batt 100%“

 

This is the process to charge digital devices For

instance, select correct voltage (cell phone is

usually 5.5V), plug the USB cable in the charger,

then connect the cable with your cell phone. (Select

the suitable adaptor )The Display will turn on and

show our how many amp power charging into your

device, that means the charger is at work.

After about 1-2 hours, the display will stop

automatically , that means the charger is out of

power and the charging process is nished. Please

pull out the USB cable from the charger, you have to

charge in the sun or with the USB charging cable. In

addition, you also can open the cover in the sun to

charge the Li-ion battery and the cell phone at the

same time.



1. Please always pay attention to the display message.

2. It is not quality problem, if it has terminated its

unstable output in order to protect your device.

3. You can continue to charge your device only after

several hours charging to the solar.

4. Never charge the device via mini-USB port while

using the external USB port at the same time.





“Bat.checking” will ashing 25

time, after that it will show out

the power remain in the charger.













Battery: Lithium 3.7V - 1100mAh

Dimensions: 14.5 x 6.8 x 35mm

Weight: 150 grams



1. Solar Charger connectors

2. Cell Phone adapters:

Nokia (2x)

Samsung (2x)

Sony Ericsson

Mini USB

Micro USB

NDS Lite

Female USB

iPod & iPhone (with own cable)

Sony PSP

3. AC-DC adapter

4. USB charging + connecting cable included



1. Solar Panel (Mono crystalline) :3V 120mA

2. Charging time for the cell phone: 1-2 hours

3. Charging time for the Li-ion battery using adapter:

2-3 hours

4. Charging time for the Li-ion battery using solar

panel: 12hours





























Ut ate vulla augait numsan ut augue magna cor augait

nullumsan enisi. Im vulluptat. Exer ipis euisl dunt

praesto er augiam ex exercil iquam, sit lobore mod

tet do etummy num dolobor ipsummolum diam, conse

faccum ver aliquat, quis ea feugiamet nulla faccum ing

eui eugait prat ip enisi.





 

This is the process to charge the solar panel. First,

open the two wings and keep the solar panel side

facing in the sunlight. The display will show out

“Solar Charge OK”, It means the Li-ion battery is

being charged. When the battery is fully charged,

the display will stop automatically. If the panel is not

face to the sunlight, the display will be powered off,

the solar panel will stop working.

 

This is the process to charge the battery inside.

Plug the charging cable into the small

USB socket of the charger and connect into the

laptop or PC USB socket.

 Plug the build in USB into the laptop

or PC USB socket. The display will show out

“SystemChecking” and the information of the power

remain in the charger. Please pull out the plug when

display show out the “Batt 100%“

 

This is the process to charge digital devices For

instance, select correct voltage (cell phone is

usually 5.5V), plug the USB cable in the charger,

then connect the cable with your cell phone. (Select

the suitable adaptor )The Display will turn on and

show our how many amp power charging into your

device, that means the charger is at work.

After about 1~2 hours, the display will stop

automatically , that means the charger is out of

power and the charging process is nished. Please

pull out the USB cable from the charger, you have to

charge in the sun or with the USB charging cable. In

addition, you also can open the cover in the sun to

charge the Li-ion battery and the cell phone at the

same time.



1. Please always pay attention to the display message.

2. It is not quality problem, if it has terminated its

unstable output in order to protect your device.

3. You can continue to charge your device only after

several hours charging to the solar.

4. Never charge the device via mini-USB port while

usingthe external USB port at the same time



 

This is the process to charge the solar panel. First,

open the two wings and keep the solar panel side

facing in the sunlight. The display will show out

“Solar Charge OK”, It means the Li-ion battery is

being charged. When the battery is fully charged,

the display will stop automatically. If the panel is not

face to the sunlight, the display will be powered off,

the solar panel will stop working.

 

This is the process to charge the battery inside.

Plug the charging cable into the small

USB socket of the charger and connect into the

laptop or PC USB socket.

 Plug the build in USB into the laptop

or PC USB socket. The display will show out

“SystemChecking” and the information of the power

remain in the charger. Please pull out the plug when

display show out the “Batt 100%“

 

This is the process to charge digital devices For

instance, select correct voltage (cell phone is

usually 5.5V), plug the USB cable in the charger,

then connect the cable with your cell phone. (Select

the suitable adaptor )The Display will turn on and

show our how many amp power charging into your

device, that means the charger is at work.

After about 1~2 hours, the display will stop

automatically , that means the charger is out of

power and the charging process is nished. Please

pull out the USB cable from the charger, you have to

charge in the sun or with the USB charging cable. In

addition, you also can open the cover in the sun to

charge the Li-ion battery and the cell phone at the

same time.



1. Please always pay attention to the display message.

2. It is not quality problem, if it has terminated its

unstable output in order to protect your device.

3. You can continue to charge your device only after

several hours charging to the solar.

4. Never charge the device via mini-USB port while

usingthe external USB port at the same time



 

This is the process to charge the solar panel. First,

open the two wings and keep the solar panel side

facing in the sunlight. The display will show out

“Solar Charge OK”, It means the Li-ion battery is

being charged. When the battery is fully charged,

the display will stop automatically. If the panel is not

face to the sunlight, the display will be powered off,

the solar panel will stop working.

 

This is the process to charge the battery inside.

Plug the charging cable into the small

USB socket of the charger and connect into the

laptop or PC USB socket.

 Plug the build in USB into the laptop

or PC USB socket. The display will show out

“SystemChecking” and the information of the power

remain in the charger. Please pull out the plug when

display show out the “Batt 100%“

 

This is the process to charge digital devices For

instance, select correct voltage (cell phone is

usually 5.5V), plug the USB cable in the charger,

then connect the cable with your cell phone. (Select

the suitable adaptor )The Display will turn on and

show our how many amp power charging into your

device, that means the charger is at work.

After about 1~2 hours, the display will stop

automatically , that means the charger is out of

power and the charging process is nished. Please

pull out the USB cable from the charger, you have to

charge in the sun or with the USB charging cable. In

addition, you also can open the cover in the sun to

charge the Li-ion battery and the cell phone at the

same time.



1. Please always pay attention to the display message.

2. It is not quality problem, if it has terminated its

unstable output in order to protect your device.

3. You can continue to charge your device only after

several hours charging to the solar.

4. Never charge the device via mini-USB port while

usingthe external USB port at the same time

Solar

chrg OK

Bat.

checking

Bat.

checking

Batt 100%

USB Out

XXXmA

AM-106

power everywhere





Product specificaties

Merk:	A-solar
Categorie:	Telefoon oplader
Model:	AM-106 Sun Traveler

Heb je hulp nodig?

Als je hulp nodig hebt met A-solar AM-106 Sun Traveler stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Telefoon oplader A-solar

A-solar AM-109 Onyx Charger Handleiding

16 Augustus 2022

A-solar AM-106 Sun Traveler Handleiding

17 Augustus 2022

A-solar AL-250 Power Bank 2200 Handleiding

16 Augustus 2022

Handleiding Telefoon oplader

Telefoon oplader Sony

Nieuwste handleidingen voor Telefoon oplader

Sony DK30 Handleiding

8 April 2022