ZTE Blade A0620 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor ZTE Blade A0620 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 139 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
秘密 Confidential▲
<以上所有信息均为中兴通讯股份有限公司所有,不得外传>
All Rights reserved, No Spreading abroad without Permission of ZTE
1
ZTE BLADE A0620 Upgrade Guide (Through an SD Card)
1. Cautions
The software version and pictures in this document are just for
reference only. Please use ZTE handset support website provided version
to download software.
1) Download the upgrade package.
Open http://www.ztedevice.com.cn/support and download the upgrade
package (update.zip) that matches your phone model. If the
downloaded package is not update.zip, unzip the package to obtain
update.zip.
Ensure that your micro SD card is at least 2GB.
Note Please refer to our current version download size.
2) Remove the SIM card, then back up the data and APPs in your phone
before the upgrade.
3) Perform data backup.
Note: You should not remove the SD card during the backup process. To
avoid data lost, it is not recommended to cancel the backup process.
4) Verify that the file in the root directory of the SD cardupdate.zip
matches the model of the phone. Do not modify the file name and
extension name of the files in the upgrade package.
5) Verify that your phone has enough (at least 40%) power. Charge the phone
if required. To avoid data lost or upgrade failure, it is not recommended to
upgrade your phone through an SD card when the phone is being charged.
6) You should not perform any other operation on the phone during the
upgrade process.
7) A normal upgrade should be completed in minutes. If the phone does3-5
not reboot or show any response in minutes, you should perform the5
upgrade process again. If the phone cannot be started, perform a forced
upgrade. If the forced upgrade does not work, you should contact an
after-sale service agent for support.
2. Upgrade Description
There are two upgrade methods: normal upgrade and forced upgrade.
If the phone cannot be started properly, for example, the phone cannot be
started, or the phone does not enter standby state, perform a forced upgrade.
If the phone can be started properly and the menu can be selected,Settings
perform a normal upgrade.
秘密 Confidential▲
<以上所有信息均为中兴通讯股份有限公司所有,不得外传>
All Rights reserved, No Spreading abroad without Permission of ZTE
2
3. Upgrade Steps
A. Normal upgrade (the primary upgrade method)
1) Download the upgrade package that matches the phone model from
ZTE official website (http://www.ztedevice.com.cn/support/), extract
update.zip from the package, and copy update.zip to the root directory
of the SD card (the file name must be update.zip).
2) Select > , verify that the update.zip file in theFile Manager SD Card
root directory of the SD card is proper, see Figure 3-1:
Figure 3-1
3) Tap and select > ,see Figure 3-2.Settings System Update
Figure 3-2
4) Tap and select , then touch , After 15 secondsSystem update INSTALL
the phone automatically upgrade, See Figure 3-3to
Figure 3-3
秘密 Confidential▲
<以上所有信息均为中兴通讯股份有限公司所有,不得外传>
All Rights reserved, No Spreading abroad without Permission of ZTE
3
B. Forced upgrade (for the phones that cannot be started or the phones
that cannot enter standby state)
1) For a powered-off phone, Press and hold the key andvolume up
power Android recovery.key until the phone enters In this mode, the
volume powerkey can be used to select a menu, the key can be used to
confirm it.
2) Press the key to selectVolume down Apply update from SD card,
and press the key to confirm it. The root directory of the SD card ispower
opened.
3) Press the key to select the file, and press theVolume down update.zip
power key to confirm it. The phone starts the upgrade process.
4) The phone completes the upgrade process in about minutes.5
4. (Optional) Restoring the Data
If you have backed up data before upgrading your phone, restore the data.
Do not remove the SD card during the restoration process. To avoid data
lost, it is not recommended to cancel the restoration process.


Product specificaties

Merk: ZTE
Categorie: Niet gecategoriseerd
Model: Blade A0620

Heb je hulp nodig?

Als je hulp nodig hebt met ZTE Blade A0620 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd ZTE

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd