ZKTeco SBT1011S Handleiding

ZKTeco Niet gecategoriseerd SBT1011S

Lees hieronder de 📖 handleiding in het Nederlandse voor ZKTeco SBT1011S (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 123 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

Swing Barrier Turnstile User Manual

Applicable Models: SBT1000S

Version: 1.2 Date: May. 2018

Chapter 1 Product Introduction

1.1 Model number and access control

Access

Model NO C3-200 with two

KR800 reader inBIO260 with two FR1500/ID reader

SBT1000S √

SBT1011S √

SBT1022S √

1.2 Chassis and dimensions

SBT1000S , series with stainless steel housing, provide simple and beautiful design with anti-corrosion.

It is provide orderly and civilized passage to people while eliminating illegal personnel access. In case

of emergency, it ensures timely evacuation channel smoothly and convenient personnel.

SBT1 S000 ’s appearance and dimensions are as shown in Figure 1- : 2A

Figure1- 2A

1.3 Mechanical system

The mechanical system of a swing barrier turnstile includes the chassis and the core component. The

chassis is a carrier where , the sensor, and the lock are installed. The core component the reader

mainly consists of the motor, the frame and the swing arm.

1.4 Electronic control system

The electronic control system of a swing barrier turnstile is mainly composed of the reader, the

control panel, the access controller, the sensor and the transformer.

Reader: The reader reads the data in the card and sends it to the controller.

Control panel: The control panel is the system’s control center that receives signals from the access

controller, performs logical judgment and processing of these signals, and sends executive

commands to the electric motor.

IR sensor: -anti pinch function.

1.5 The working principle of swing barrier turnstile system

1) After powered on, the system performs self-check. If no failure is detected, the machine starts to

operate normally. If a failure is detected, the system displays related messages on the LCD

display screen so that the user can have a quick knowledge of and solve the problem.

2) When the reader detects a valid card, the buzzer will give a nice audible prompt to the

pedestrian, indicating that the card is being read successfully. And then, the reader sends signals

to the access controller to request permission to pass through the passage. If the signal is legal,

the access controller will send the open signal to the master control panel.

3) After receiving the signal from the access controller, the control panel sends valid control signals

to the electric motor and opens the barrier.

1.6 Product related parameters

Dimension(mm) SBT1000S: L=200, W=185, H=1100

Input voltage AC100 120V/200- -

240V,50- 60Hz Output voltage DC 24V

Input control signal Switching signal Relative humidity %- % 20 93

temperature - - 28℃60℃Pass speed : Maximum 30/minute

Infrared sensor 1 Working

environment I ndoor/Outdoor（If shelter）

Air switch

Access controller

IR Sensor

24V power supply

Motor

Encoder

Control board

Clutch

Reader

Product specificaties

Merk:	ZKTeco
Categorie:	Niet gecategoriseerd
Model:	SBT1011S
Kleur van het product:	Roestvrijstaal
Gewicht:	31000 g
Breedte:	200 mm
Diepte:	985 mm
Hoogte:	1100 mm
Gewicht verpakking:	38000 g
Breedte verpakking:	280 mm
Diepte verpakking:	280 mm
Hoogte verpakking:	1160 mm
Soort:	Neergaande arm optische tourniquet
Materiaal behuizing:	Roestvrijstaal
Frame materiaal:	Metaal
Geschikt voor buitengebruik:	Ja
Geschikt voor gebruik binnen:	Ja
AC-ingangsspanning:	110 - 220 V
Bedrijfstemperatuur (T-T):	-28 - 60 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 80 procent
Gemiddeld aantal cycli tussen storingen (MCBF):	2000000
Barrièremateriaal:	Gehard glas
Passeersnelheid (personen per minuut):	10 persoon/personen
Nooddeur ontgrendeling:	Ja