ZKTeco G3 Pro Handleiding

ZKTeco Niet gecategoriseerd G3 Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor ZKTeco G3 Pro (70 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/70

USER MANUAL

Applicable Model: G3 Pro

Version: 1.0

Date: February 2020

Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form.

All parts of this manual belong to ZKTeco co., LTD and its subsidiaries (hereinafter the "Company" or "ZKTeco").

Trademark

is a registered trademark of ZKTeco. Other trademarks involved in this manual are owned by their

respective owners.

Disclaimer

This manual contains information on the operation and maintenance of the ZKTeco equipment. The copyright in all the

documents, drawings, etc. in relation to the ZKTeco supplied equipment vests in and is the property of ZKTeco. The

contents hereof should not be used or shared by the receiver with any third party without express written permission of

ZKTeco.

The contents of this manual must be read as a whole before starting the operation and maintenance of the supplied

equipment. If any of the content(s) of the manual seems unclear or incomplete, please contact ZKTeco before starting

the operation and maintenance of the said equipment.

It is an essential pre requisite for the satisfactory operation and maintenance that the operating and maintenance -

personnel are fully familiar with the design and that the said personnel have received thorough training in operating and

maintaining the machine/unit/equipment. It is further essential for the safe operation of the machine/unit/equipment

that personnel has read, understood and followed the safety instructions contained in the manual.

In case of any conflict between terms and conditions of this manual and the contract specifications, drawings, instruction

sheets or any other contract related documents, the contract conditions/documents shall prevail. The contract specific -

conditions/documents shall apply in priority.

ZKTeco offers no warranty, guarantee or representation regarding the completeness of any information contained in this

manual or any of the amendments made thereto. ZKTeco does not extend the warranty of any kind, including, without

limitation, any warranty of design, merchantability or fitness for a particular purpose.

ZKTeco does not assume responsibility for any errors or omissions in the information or documents which are referenced

by or linked to this manual. The entire risk as to the results and performance obtained from using the information is

assumed by the user.

ZKTeco in no event shall be liable to the user or any third party for any incidental, consequential, indirect, special, or

exemplary damages, including, without limitation, loss of business, loss of profits, business interruption, loss of business

information or any pecuniary loss, arising out of, in connection with, or relating to the use of the information contained in

or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages.

This manual and the information contained therein may include technical, other inaccuracies or typographical errors.

ZKTeco periodically changes the information herein which will be incorporated into new additions/amendments to the

manual. ZKTeco reserves the right to add, delete, amend or modify the information contained in the manual from time to

time in the form of circulars, letters, notes, etc. for better operation and safety of the machine/unit/equipment. The said

additions or amendments are meant for improvement /better operations of the machine/unit/equipment and such

amendments shall not give any right to claim any compensation or damages under any circumstances.

ZKTeco shall in no way be responsible (i) in case the machine/unit/equipment malfunctions due to any non-compliance

of the instructions contained in this manual (ii) in case of operation of the machine/unit/equipment beyond the rate

limits (iii) in case of operation of the machine and equipment in conditions different from the prescribed conditions of

the manual.

The product will be updated from time to time without prior notice. The latest operation procedures and relevant

documents are available on http://www.zkteco.com

If there is any issue related to the product, please contact us.

About the Company

ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product

offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access

controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including

battery- - -operated fingerprint and face reader Door Locks. Our security solutions are multi lingual and localized in

numerous different languages. At the ZKTeco state- - -of the art 700,000 square foot ISO9001-certified manufacturing

facility, we control manufacturing, product design, component assembly, and logistics/shipping, all under one roof.

Since 1998, the founders of ZKTeco have been determined for independent research and development of biometric

verification procedures and the productization of biometric verification SDK, which was initially widely applied in PC

security and identity authentication fields. With the continuous enhancement of the development and plenty of market

applications, the team has gradually constructed an identity authentication ecosystem and smart security ecosystem,

which are based on biometric verification techniques. With years of experience of the industrialization of biometric

verifications.

Product specificaties

Merk:	ZKTeco
Categorie:	Niet gecategoriseerd
Model:	G3 Pro
Kleur van het product:	Wit
Ingebouwd display:	Ja
Breedte:	199.2 mm
Diepte:	171.8 mm
Hoogte:	96.9 mm
Soort:	Basistoegangscontrolelezer
USB-poort:	Ja
Vingerafdruklezer:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Aantal gebruikers:	2000 gebruiker(s)
Camera voorzijde:	Ja
DC voltage bereik:	12 - 12 V
PC connected:	Ja
Bedrijfstemperatuur (T-T):	0 - 45 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent
Geïntegreerd Keypad:	Ja
Authenticatie type:	Access chip/card, Biometric, Face recognition
Toegangcode lezer:	Ja
Verificatietijd (1:1):	1 s
PC verbinding:	USB 2.0
Gelijkstroom (max):	1.5 A
Inhoud kaarten:	2000 kaarten
Logcapaciteit:	100000